Wraps by car

Chevrolet SSR wrap

The Chevrolet SSR wrap guide covers the 2003–2006 pickup and what it takes to vinyl wrap it. This page has one generation, the two-door SSR with its GMT368 platform. A full wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan on about 72 ft (22 m).

1generations18 mof film for a full wrap

Chevrolet SSR, first generation, factory photo
Chevrolet SSR, first generation. Factory color shown.

Chevrolet SSR wrap colors and ideas

  • Chevrolet SSR black wrap
  • Chevrolet SSR white wrap
  • Chevrolet SSR gray wrap
  • Chevrolet SSR silver wrap
  • Chevrolet SSR red wrap
  • Chevrolet SSR blue wrap
  • Chevrolet SSR green wrap
  • Chevrolet SSR yellow wrap
  • Chevrolet SSR orange wrap
  • Chevrolet SSR purple wrap
  • Chevrolet SSR pink wrap
  • Chevrolet SSR teal wrap
  • Chevrolet SSR brown wrap
  • Chevrolet SSR gold wrap
  • Chevrolet SSR chrome wrap
  • Chevrolet SSR color shift wrap
  • Chevrolet SSR carbon fiber wrap
  • Chevrolet SSR camo and patterned wrap

How much vinyl to wrap a Chevrolet SSR

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2006pickup (2 doors)191.4 in (4,862 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Chevrolet SSR wrap cost factors

Chevrolet SSR wrap cost depends on the size of the truck, the film choice, and the number of pieces to cut and tuck. The truck is 191.4 in (4,862 mm) long, which means the shop uses about 59 ft (18 m) of cast film for a full wrap. Chrome or patterned film adds more material, around 72 ft (22 m), and costs more because of the film itself. The two long doors and the separate bed add labor, because each door is one large piece and the bed has its own edges.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: pickup (2 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • Two long side doors: each door is one large piece of film.

Chevrolet SSR wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet SSR, first generation, factory photo
Factory color shown

2003–2006 Chevrolet SSR pickup (first generation)

2003–2006pickup (2 doors)191.4 in (4,862 mm)

The first generation Chevrolet SSR, from 2003 to 2006, has a pickup bed that changes how the film is planned. The cab and the bed are wrapped as two bodies, and the inside of the bed stays bare. The bed has its own top rails and tailgate, so the installer treats them as separate surfaces. This means a full wrap on an SSR has more edges and seams than a regular two-door truck without a separate bed.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Two long side doors: each door is one large piece of film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Chevrolet SSR

A partial wrap on a Chevrolet SSR can cover the roof, the hood, or the mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done without wrapping the bed.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet SSR: body, cut-outs and film

A Chevrolet SSR vinyl wrap treats the cab and the bed as two separate bodies, because the bed sits behind the cab and has its own surfaces. The truck is 191.4 in (4,862 mm) long, which is a large area even with only two doors. The two long side doors each take one large piece of film, so the installer needs room to lay them out. The class is SUV, but the shape is a pickup, so the wrap follows the bed lines all the way back.

Chevrolet SSR wrap ideas start with the two long side doors, because each door is one large piece of film. The pickup bed is a key part: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped. The window trim and badges stay on the truck, so the film is cut around them or they are removed and reinstalled. The door handles also stay in place, so the film is cut to fit around them.

To know how much vinyl to wrap a Chevrolet SSR, count the cab and the bed as two bodies and add their areas. Only one generation exists, from 2003 to 2006, so the body size is the same for every SSR. The length of 191.4 in (4,862 mm) drives the film estimate, because the bed adds a lot of surface. The film estimate of about 59 ft (18 m) of 60-inch (1.52 m) cast film already includes the bed, so do not add extra for it.

Questions about wrapping a Chevrolet SSR

How much vinyl does it take to wrap a Chevrolet SSR?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast film to wrap a Chevrolet SSR. That figure covers the newest body, the 2003–2006 pickup, with the cab and the bed wrapped as two bodies. With chrome or patterned film, the amount rises to about 72 ft (22 m) because the material is laid differently.

Is the bed of a Chevrolet SSR wrapped?

No, the inside of the bed is not wrapped. The cab and the bed of a Chevrolet SSR are wrapped as two bodies, so the outside surfaces of the bed get film. The inside of the bed stays bare, because it is a cargo area and film does not hold up to heavy use.

Can I wrap only the hood or the roof of a Chevrolet SSR?

Yes, you can wrap only the hood or the roof of a Chevrolet SSR. A partial wrap on this truck can cover the roof, the hood, or the mirror caps. The hood is a single panel, and the roof is a large smooth surface, so both are straightforward for a partial wrap.

Is a Chevrolet SSR hard to wrap?

It is not hard, but it takes more work than a standard two-door because of the pickup bed and the long doors. The cab and the bed are wrapped as two bodies, which creates extra seams and edges. Each long side door is one large piece of film, so the installer needs a clean, dust-free area to lay it out. The truck is 191.4 in (4,862 mm) long, which means more area to cover and more time to finish.