Wraps by car

Chevrolet Tavera wrap

The Chevrolet Tavera wrap covers this minivan in vinyl film, and the catalog holds one generation of the car. The Tavera was built from 2002 to 2017 as a five-door van. A full wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film.

1generations19.5 mof film for a full wrap

Chevrolet Tavera, first generation, factory photo
Chevrolet Tavera, first generation. Factory color shown.

Chevrolet Tavera wrap colors and ideas

  • Tavera black wrap
  • Tavera white wrap
  • Tavera gray wrap
  • Tavera silver wrap
  • Tavera red wrap
  • Tavera blue wrap
  • Tavera green wrap
  • Tavera yellow wrap
  • Tavera orange wrap
  • Tavera purple wrap
  • Tavera pink wrap
  • Tavera teal wrap
  • Tavera brown wrap
  • Tavera gold wrap
  • Tavera chrome wrap
  • Tavera color shift wrap
  • Tavera carbon fiber wrap
  • Tavera camo and patterned wrap

How much vinyl to wrap a Chevrolet Tavera

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2002–2017van (5 doors)174.6 in (4,435 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Tavera wrap cost factors

A Tavera wrap cost depends on the size of the vehicle and the film you pick. The body is 174.6 in (4,435 mm) long and takes about 64 ft (19.5 m) of standard 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount of material to about 74 ft (22.5 m). The tall roof, at 69.5 in (1,765 mm), adds labor because installers need a platform.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (69.5 in (1,765 mm)): the roof is wrapped from a platform.

Tavera wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Tavera, first generation, factory photo
Factory color shown

2002–2017 Tavera van (first generation)

2002–2017van (5 doors)174.6 in (4,435 mm)

The first-generation Chevrolet Tavera has sliding side doors that set the wrap layout. The tracks stay bare, so the installer cuts the film along the track edges. This keeps the doors moving freely and gives the wrap a clean line. The body code B1 and B2 models share the same door design.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (69.5 in (1,765 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Tavera

A partial wrap on a Chevrolet Tavera can cover the roof, hood, or mirror caps without wrapping the whole van. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to protect against stone chips. These smaller jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Tavera: body, cut-outs and film

The Chevrolet Tavera vinyl wrap has to deal with a long, tall van body. The body is 174.6 in (4,435 mm) long and 69.5 in (1,765 mm) high, so installers work from a platform for the roof. Sliding side doors mean the film is cut along the door tracks. The five-door layout also adds more edges than a two-door car.

Tavera wrap ideas start with the film you pick and the parts you cover. The sliding door tracks stay bare, and the film is cut along them rather than wrapped into the channel. The roof of this tall body is wrapped from a platform. You can leave the window trim and badges black or cover them as part of a chrome delete.

How much vinyl to wrap a Tavera depends on the film type you choose. A full wrap in standard cast film takes about 64 ft (19.5 m) of 60-inch (1.52 m) material. If the wrap uses chrome or patterned film, plan for about 74 ft (22.5 m). The first generation ran from 2002 to 2017 and kept the same van body, so the figures stay the same across those years.

Questions about wrapping a Chevrolet Tavera

How much vinyl does it take to wrap a Chevrolet Tavera?

A full wrap of a Chevrolet Tavera takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. That figure applies to the newest body, which is the first generation built from 2002 to 2017. If the wrap uses chrome or patterned film, the estimate rises to about 74 ft (22.5 m).

Are the sliding doors of a Tavera wrapped?

No, the sliding door tracks of a Tavera are not wrapped. The film is cut along the tracks so the doors slide without scraping the vinyl. The tracks stay bare, which gives the wrap a clean edge on both sides of the van.

Can I wrap only the hood or the roof of a Tavera?

Yes, you can wrap only the hood or the roof of a Tavera. A partial wrap can cover the roof, hood, or mirror caps on its own. The roof needs a platform because the body is 69.5 in (1,765 mm) tall.

Is a Tavera hard to wrap?

A Tavera is not the easiest van to wrap because of its size and doors. The sliding side door tracks force the installer to cut the film along the channels. The tall body, at 69.5 in (1,765 mm), means the roof is wrapped from a platform. These steps add labor to the 174.6 in (4,435 mm) long body.