Wraps by car

Chevrolet Trans Sport wrap

The Chevrolet Trans Sport wrap page covers the first generation (1996–2005) of this minivan. A full vinyl wrap of the newest body takes about 76 ft (23 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan on about 87 ft (26.5 m). The page explains what a wrap involves on this tall five-door van.

1generations23 mof film for a full wrap

Chevrolet Trans Sport, first generation, factory photo
Chevrolet Trans Sport, first generation. Factory color shown.

Chevrolet Trans Sport wrap colors and ideas

  • Trans Sport black wrap
  • Trans Sport white wrap
  • Trans Sport gray wrap
  • Trans Sport silver wrap
  • Trans Sport red wrap
  • Trans Sport blue wrap
  • Trans Sport green wrap
  • Trans Sport yellow wrap
  • Trans Sport orange wrap
  • Trans Sport purple wrap
  • Trans Sport pink wrap
  • Trans Sport teal wrap
  • Trans Sport brown wrap
  • Trans Sport gold wrap
  • Trans Sport chrome wrap
  • Trans Sport color shift wrap
  • Trans Sport carbon fiber wrap
  • Trans Sport camo and patterned wrap

How much vinyl to wrap a Chevrolet Trans Sport

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2005van (5 doors)201.3 in (5,114 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)

Trans Sport wrap cost factors

The Trans Sport wrap cost depends on the size of the van and the film you choose. A tall, five-door body takes more labor than a small hatchback, especially around the sliding doors. The choice of cast film, chrome film, or patterned film changes the amount of material needed. The roof height also adds time because installers work from a platform.

  • Film for a full wrap: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (70.9 in (1,801 mm)): the roof is wrapped from a platform.

Trans Sport wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Trans Sport, first generation, factory photo
Factory color shown

1996–2005 Trans Sport van (first generation)

1996–2005van (5 doors)201.3 in (5,114 mm)

The first generation Chevrolet Trans Sport is a five-door van built from 1996 to 2005. Its sliding side doors have tracks that stay bare, and the film is cut along them. The body is 201.3 in (5,114 mm) long and 70.9 in (1,801 mm) tall, so the roof is wrapped from a platform. A full wrap of this body takes about 76 ft (23 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (70.9 in (1,801 mm)): the roof is wrapped from a platform.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Roof, hood, chrome delete and PPF on a Trans Sport

A partial wrap on a Trans Sport covers the roof, hood, or mirror caps instead of the whole van. A chrome delete adds black film to the window trim and badges for a different look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less material than a full van wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Trans Sport: body, cut-outs and film

A Chevrolet Trans Sport vinyl wrap covers a large van body with five doors. The vehicle is 201.3 in (5,114 mm) long and 70.9 in (1,801 mm) tall, so you need more film than on a small car. The roof wrap requires a platform because of the height. The sliding side doors are wrapped as part of a full wrap but the tracks stay bare.

Trans Sport wrap ideas start with handling the sliding side doors correctly. The door tracks stay bare, and the film is cut along them so the doors can still slide. The tall body means the roof is reached from a platform and wrapped in one large piece. You can add a chrome delete with black film on the window trim and badges.

How much vinyl to wrap a Trans Sport depends on the generation, and this page shows one generation. Only the 1996–2005 van is in the catalog, so the figures stay the same for every car. If you count film for a different year range, you need another source. The first generation is a single body style, so there are no alternative sizes.

Questions about wrapping a Chevrolet Trans Sport

How much vinyl does it take to wrap a Chevrolet Trans Sport?

It takes about 76 ft (23 m) of 60-inch (1.52 m) cast film to wrap a Chevrolet Trans Sport. The estimate is for the newest body in the catalog, the 1996–2005 van. If you choose chrome or patterned film, you need about 87 ft (26.5 m). The extra film allows for pattern matching and waste on the large body.

Are the sliding doors of a Trans Sport wrapped?

Yes, the sliding doors of a Trans Sport are wrapped as part of a full wrap. The film covers the door panels but the tracks stay bare, and the film is cut along them. This keeps the doors sliding freely after the wrap is installed.

Can I wrap only the hood or the roof of a Trans Sport?

Yes, you can wrap only the hood or the roof of a Trans Sport. A partial wrap can cover the roof, hood, or mirror caps instead of the whole van. The roof wrap is done from a platform because the van is 70.9 in (1,801 mm) tall.

Is a Trans Sport hard to wrap?

A Trans Sport is considered a harder wrap because of its size and sliding doors. The tall body, 70.9 in (1,801 mm), means the roof is wrapped from a platform. The sliding side door tracks stay bare, and the film is cut along them, which adds careful trimming. These steps take more time than wrapping a small car.