Wraps by car

Chevrolet Vectra wrap

The Chevrolet Vectra wrap page covers two generations of this compact sedan built from 1993 to 2002. A full vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 62 ft (19 m) for the same car. Both generations share the GM2900 platform and a four-door sedan body.

2generations15 mof film for a full wrap

Chevrolet Vectra, second generation, factory photo
Chevrolet Vectra, second generation. Factory color shown.

Chevrolet Vectra wrap colors and ideas

  • Vectra black wrap
  • Vectra white wrap
  • Vectra gray wrap
  • Vectra silver wrap
  • Vectra red wrap
  • Vectra blue wrap
  • Vectra green wrap
  • Vectra yellow wrap
  • Vectra orange wrap
  • Vectra purple wrap
  • Vectra pink wrap
  • Vectra teal wrap
  • Vectra brown wrap
  • Vectra gold wrap
  • Vectra chrome wrap
  • Vectra color shift wrap
  • Vectra carbon fiber wrap
  • Vectra camo and patterned wrap

How much vinyl to wrap a Chevrolet Vectra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2002sedan (4 doors)176.4 in (4,480 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1993–1996sedan (4 doors)174.5 in (4,432 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Vectra wrap cost factors

Vectra wrap cost depends on the film type, the condition of the paint, and the number of cut-outs. A full wrap of this sedan uses about 49 ft (15 m) of cast vinyl, and chrome or patterned film adds about 13 ft (4 m). The four door handles, mirror caps, and trunk lid all add labor to the job. Paint correction before wrapping adds cost on a car of these years.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (4 doors).

Vectra wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Vectra, second generation, factory photo
Factory color shown

1996–2002 Vectra sedan (second generation)

1996–2002sedan (4 doors)176.4 in (4,480 mm)

The second generation Chevrolet Vectra was built from 1996 to 2002 as a four-door sedan. Paint age on a car of these years means panels may be original or repainted, and a test spot comes before a full wrap. The body is 176.4 in (4,480 mm) long, so a wrap uses about 49 ft (15 m) of cast film. Chrome or patterned film takes about 62 ft (19 m) for this sedan.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Chevrolet Vectra, first generation, factory photo
Factory color shown

1993–1996 Vectra sedan (first generation)

1993–1996sedan (4 doors)174.5 in (4,432 mm)

The first generation Chevrolet Vectra was built from 1993 to 1996 with a sedan body only. The size and the body style of this car mean a full wrap uses about 49 ft (15 m) of 60-inch film across its panels. This generation is shorter at 174.5 in (4,432 mm), and the four-door layout keeps the panel count the same as the later car.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Vectra

Partial wrap jobs on a Chevrolet Vectra include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full color change wrap and can be done on one panel at a time.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Vectra: body, cut-outs and film

A Chevrolet Vectra vinyl wrap has to cover a four-door sedan with a length of 176.4 in (4,480 mm) in the second generation or 174.5 in (4,432 mm) in the first. The body style means four door handles, four door jambs, and a trunk lid add to the number of panels. The compact size keeps the total film use near 49 ft (15 m) for a solid color. Installers plan seams at the roof rails and under the rocker panels because the sedan has no hatch to hide them.

Vectra wrap ideas start with the parts that need extra work. The door handles, mirror caps, and antenna base are removed or cut out for a clean install. Window trim and badges can be covered with black film for a chrome delete. The front bumper, grille, and headlight openings need relief cuts and careful heating on this car.

How much vinyl to wrap a Vectra changes slightly between the two generations. The second generation is 48 mm longer, but both sedans use about 49 ft (15 m) of 60-inch film for a solid wrap. The first generation needs about 61 ft (18.5 m) of chrome or patterned film, one foot less than the second. Anyone counting film for a full wrap should measure their own car before ordering.

Questions about wrapping a Chevrolet Vectra

How much vinyl does it take to wrap a Chevrolet Vectra?

A full wrap of the newest Chevrolet Vectra takes about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl. For chrome or patterned film, the estimate is about 62 ft (19 m). These figures cover the second generation sedan from 1996 to 2002.

Can I wrap only the hood or the roof of a Vectra?

Yes, you can wrap only the hood or the roof of a Vectra. Partial wrap jobs on this car include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges, and paint protection film goes on the front end.

Is a Vectra hard to wrap?

A Vectra is not especially hard to wrap, but the four door handles and mirror caps add work. The sedan body is 176.4 in (4,480 mm) long, which means a full wrap uses about 49 ft (15 m) of film. The window trim and badges need care for a chrome delete, and the front and rear bumpers have deep curves that require heating and stretching.

How many generations of the Vectra does this page cover?

This page covers two generations of the Chevrolet Vectra. The first generation was built from 1993 to 1996, and the second from 1996 to 2002. Both are compact sedans on the GM2900 platform.