Wraps by car

Chevrolet Vega wrap

The Chevrolet Vega wrap page covers the 1970–1977 subcompact in one generation. A full vinyl wrap on a Vega sedan takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The wagon uses up to 52 ft (16 m), and the hatchback sits between the two.

1generations14.5 mof film for a full wrap

Chevrolet Vega, first generation, factory photo
Chevrolet Vega, first generation. Factory color shown.

Chevrolet Vega wrap colors and ideas

  • Vega black wrap
  • Vega white wrap
  • Vega gray wrap
  • Vega silver wrap
  • Vega red wrap
  • Vega blue wrap
  • Vega green wrap
  • Vega yellow wrap
  • Vega orange wrap
  • Vega purple wrap
  • Vega pink wrap
  • Vega teal wrap
  • Vega brown wrap
  • Vega gold wrap
  • Vega chrome wrap
  • Vega color shift wrap
  • Vega carbon fiber wrap
  • Vega camo and patterned wrap

How much vinyl to wrap a Chevrolet Vega

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1970–1977hatchback, sedan, wagon (2 or 3 doors)169.7 in (4,310 mm)about 48 ft (14.5 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Vega wrap cost factors

Vega wrap cost follows the body style and the amount of film the job needs. A sedan takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, and a wagon takes about 52 ft (16 m). Film choice changes the cost as well: solid cast film costs less to buy than chrome or patterned film. Labor also shifts with the car, since the wagon has more roof area and the tailgate adds cut work.

  • Film for a full wrap: about 48 ft (14.5 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: hatchback, sedan, wagon (2 or 3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Vega wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Vega, first generation, factory photo
Factory color shown

1970–1977 Vega hatchback, sedan, wagon (first generation)

1970–1977hatchback, sedan, wagon (2 or 3 doors)169.7 in (4,310 mm)

The 1970–1977 Chevrolet Vega came as a hatchback, sedan, and wagon with two or three doors. The style decides the panel plan: the wagon has a longer roof and D-pillars, so it needs more film than the sedan. Installers count the tailgate as one panel on all styles, but the wagon's is larger. A full wrap on a first-generation Vega runs from about 48 ft (14.5 m) to 52 ft (16 m) of 60-inch (1.52 m) film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Vega

For a Vega, a partial wrap can cover the roof, the hood, or the mirror caps on their own. Vega chrome delete covers the window trim and badges with black film to remove the brightwork. Paint protection film (PPF) is a clear option for the front end: hood, fenders, and bumper. These smaller jobs use less film than a full wrap and leave the rest of the body original.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Vega: body, cut-outs and film

A Chevrolet Vega vinyl wrap works around three body styles: hatchback, sedan, and wagon with two or three doors. The sedan is the shortest job at about 48 ft (14.5 m) of film, while the wagon needs about 52 ft (16 m). All bodies are 169.7 in (4,310 mm) long, so panel sizes stay close. The wheelbase and roof shape are the same, so the panel plan changes mostly at the rear.

Vega wrap ideas start with the tailgate and its glass setup. The rear glass sits inside the tailgate on these cars, so the film ends at the edge of the glass. Installers cut around the glass and wrap the surrounding metal. Handles, badging, and side trim also come off before film goes on. The front and rear bumpers wrap as separate sections on every Vega.

How much vinyl to wrap a Vega depends on the body style, not the year. Chevrolet built the Vega from 1970 to 1977 with one generation, so every year shares the same panels. A hatchback and a sedan are close in film use, but the wagon adds roof length. All three styles use 60-inch (1.52 m) cast film, and patterned or chrome film can push the total to about 66 ft (20 m).

Questions about wrapping a Chevrolet Vega

How much vinyl does it take to wrap a Chevrolet Vega?

Yes, a Chevrolet Vega takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for the sedan. The wagon uses about 52 ft (16 m), and the hatchback sits between those two. These figures cover a full color change wrap, not a partial job. Patterned or chrome film can push the total up to about 66 ft (20 m).

Which Vega body takes more film?

The wagon takes more film than the hatchback or the sedan. A Vega wagon uses about 52 ft (16 m) of 60-inch (1.52 m) cast film, while the sedan uses about 48 ft (14.5 m). The wagon's longer roof and bigger tailgate add the extra material. The hatchback is the middle option of the three.

Can I wrap only the hood or the roof of a Vega?

Yes, you can wrap only the hood or only the roof of a Vega. A partial wrap includes the roof, the hood, or the mirror caps as separate jobs. You can also do a chrome delete on the window trim and badges. Paint protection film (PPF) covers the front end on its own.

Is a Vega hard to wrap?

A Vega is not hard to wrap, but the tailgate adds work. The rear glass sits inside the tailgate, so the film ends at the edge of the glass. Installers cut around the glass and wrap the surrounding metal. The car is 169.7 in (4,310 mm) long, which makes the hood and roof simple single-piece panels.