Wraps by car

Chevrolet Venture wrap

The Chevrolet Venture wrap page covers the 1996–2005 minivan, one generation in this catalog. A full vinyl wrap of the newest Venture body uses about 70 ft (21.5 m) of 60-inch (1.52 m) cast film, or 82 ft (25 m) with chrome or patterned film.

1generations21.5 mof film for a full wrap

Chevrolet Venture, first generation, factory photo
Chevrolet Venture, first generation. Factory color shown.

Chevrolet Venture wrap colors and ideas

  • Venture black wrap
  • Venture white wrap
  • Venture gray wrap
  • Venture silver wrap
  • Venture red wrap
  • Venture blue wrap
  • Venture green wrap
  • Venture yellow wrap
  • Venture orange wrap
  • Venture purple wrap
  • Venture pink wrap
  • Venture teal wrap
  • Venture brown wrap
  • Venture gold wrap
  • Venture chrome wrap
  • Venture color shift wrap
  • Venture carbon fiber wrap
  • Venture camo and patterned wrap

How much vinyl to wrap a Chevrolet Venture

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2005van (5 doors)187.0 in (4,750 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Venture wrap cost factors

Venture wrap cost depends on the size of this 187.0 in (4,750 mm) five-door minivan and the film you pick. A full wrap uses about 70 ft (21.5 m) of cast vinyl, while chrome or patterned film raises the amount to 82 ft (25 m). The sliding door tracks require extra trimming, which adds labor time to the job. Partial wraps and chrome delete work on smaller areas, so the cost scales with the covered surface.

  • Film for a full wrap: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Venture wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Venture, first generation, factory photo
Factory color shown

1996–2005 Venture van (first generation)

1996–2005van (5 doors)187.0 in (4,750 mm)

The first generation Chevrolet Venture, built from 1996 to 2005, is a five-door minivan. Its sliding side doors have tracks that stay bare, and the vinyl is cut along those tracks. That detail sets the seam lines for the whole side of the van. The 187.0 in (4,750 mm) length is the main number for estimating a full wrap.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Venture

A partial wrap on a Chevrolet Venture can cover the roof, hood, or mirror caps. Venture chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is often applied as clear film on the front end. These smaller jobs use less material than a full wrap and focus on specific areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Venture: body, cut-outs and film

A Chevrolet Venture vinyl wrap has to fit a five-door van that measures 187.0 in (4,750 mm) long. The tall, boxy sides add surface area, so the film estimate is higher than on a small sedan. The sliding door tracks are left unwrapped, and the film is trimmed along them. The roof and hood are straightforward flat panels that are easier to cover.

Venture wrap ideas often start with the sliding side doors, because their tracks break the vinyl coverage. The door tracks stay bare, so the film is cut along them and the seams follow those lines. The window trim, badges, and front end can be done as separate accent pieces. A full color change wrap needs careful trimming around the door handles and mirrors.

To work out how much vinyl to wrap a Venture, start from the single generation made from 1996 to 2005. Because there is only one body style, the same length of 187.0 in (4,750 mm) applies to every Venture. The standard film estimate is about 70 ft (21.5 m) of 60-inch (1.52 m) material. Chrome or patterned films require roughly 82 ft (25 m) because of pattern alignment and overlaps.

Questions about wrapping a Chevrolet Venture

How much vinyl does it take to wrap a Chevrolet Venture?

A Chevrolet Venture takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast vinyl film for a full wrap. If you use chrome or patterned film, the estimate is about 82 ft (25 m). The sliding door tracks are left bare, so the film is cut along them.

Are the sliding doors of a Venture wrapped?

Yes, the sliding doors of a Venture are wrapped, but the tracks are left bare. The vinyl is cut along the door tracks, which leaves those channels exposed and keeps the doors working smoothly. This means the wrap does not cover the entire side of the van without a break.

Can I wrap only the hood or the roof of a Venture?

Yes, a Venture can be wrapped only on the hood or the roof as a partial wrap. Mirror caps are another common partial wrap option. You can also choose a chrome delete for the window trim and badges, or paint protection film (PPF) on the front end.

Is a Venture hard to wrap?

A Venture is not the hardest vehicle to wrap, but the sliding doors and its size add work. The door tracks stay bare, so the film must be cut along them, which takes extra time. At 187.0 in (4,750 mm) long, the van needs about 70 ft (21.5 m) of film, so there is a lot of surface to cover.