Wraps by car

Chevrolet Vivant wrap

The Chevrolet Vivant wrap covers the full body of this compact minivan, sold from 2000 to 2008 in one generation. A vinyl wrap on the Vivant uses a single body style with five doors and four sliding side tracks. The newest body needs about 64 ft (19.5 m) of 60-inch (1.52 m) cast film for a full color change. Chrome or patterned film takes about 74 ft (22.5 m) because the pattern must be matched across panels.

1generations19.5 mof film for a full wrap

Chevrolet Vivant, first generation, factory photo
Chevrolet Vivant, first generation. Factory color shown.

Chevrolet Vivant wrap colors and ideas

  • Vivant black wrap
  • Vivant white wrap
  • Vivant gray wrap
  • Vivant silver wrap
  • Vivant red wrap
  • Vivant blue wrap
  • Vivant green wrap
  • Vivant yellow wrap
  • Vivant orange wrap
  • Vivant purple wrap
  • Vivant pink wrap
  • Vivant teal wrap
  • Vivant brown wrap
  • Vivant gold wrap
  • Vivant chrome wrap
  • Vivant color shift wrap
  • Vivant carbon fiber wrap
  • Vivant camo and patterned wrap

How much vinyl to wrap a Chevrolet Vivant

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2000–2008van (5 doors)171.3 in (4,350 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Vivant wrap cost factors

Vivant wrap cost depends on the size of the van, the film chosen, and how much disassembly the body needs. At 171.3 in (4,350 mm) long, the Vivant uses about 64 ft (19.5 m) of film for a full wrap, so more complex film adds more material waste. A chrome or patterned film takes about 74 ft (22.5 m) and requires extra time to match the pattern at panel edges. Removing roof rails or cutting around a sunroof and fog lamps also adds labor to the final cost.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Vivant wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Vivant, first generation, factory photo
Factory color shown

2000–2008 Vivant van (first generation)

2000–2008van (5 doors)171.3 in (4,350 mm)

The 2000–2008 Vivant has sliding side doors, and the tracks stay bare because film would peel where the rollers move. The installer cuts the film in a straight line along the top and bottom of each track, leaving the metal channel exposed. This seam is placed at the natural edge of the door, so it reads as part of the van's design. Because the tracks run the full length of the door, the wrap film is split into a front and rear piece on each side.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Vivant

A partial wrap on the Chevrolet Vivant covers the roof, hood, and mirror caps with one color or finish. Vivant chrome delete changes the bright window trim and badges to black film, a smaller job than a full wrap. Paint protection film (PPF) on the front end adds a clear layer to the bumper, hood, and front fenders. These partial jobs use less than 64 ft (19.5 m) of film and leave the side doors unwrapped.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Vivant: body, cut-outs and film

A Chevrolet Vivant vinyl wrap fits a five-door van body that is 171.3 in (4,350 mm) long, so film is cut for tall side panels and one large roof. The sliding side doors add two long vertical seams where the film stops at the door tracks. The rear hatch and front hood are smaller than the side panels, but each panel still needs one unbroken sheet of film. The wrap shop lays film over the roof rails only if those are removed first, otherwise the film is trimmed along each rail foot.

Vivant wrap ideas start with the door tracks: those metal channels stay uncovered, and the film edge is cut along them. Some trims have a sunroof, so the roof film is cut around its glass opening and tucked under the seal. If the van has roof rails, they are unbolted before the roof film goes on, or the installer cuts the film to sit around each foot. Every trim has fog lamps in the front bumper, and the bumper film gets cut-outs for those lamps.

How much vinyl to wrap a Vivant depends on which panels you cover, and the first generation is the only generation in the catalog. For the whole van, a full wrap on the 2000–2008 body uses about 64 ft (19.5 m) of standard cast film. Chrome or patterned film raises the total to about 74 ft (22.5 m) because the installer must align the pattern across panels. Since there are no earlier or later Vivant bodies, the film estimate stays the same for every year of this model.

Questions about wrapping a Chevrolet Vivant

How much vinyl does it take to wrap a Chevrolet Vivant?

How much vinyl does it take to wrap a Chevrolet Vivant? A full wrap of the 2000–2008 Vivant uses about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. If the film is chrome or has a pattern, the total rises to about 74 ft (22.5 m) because the pattern must be aligned across panels. These figures cover the entire five-door body, including the roof and the sliding side doors.

Are the sliding doors of a Vivant wrapped?

Are the sliding doors of a Vivant wrapped? Yes, the sliding door panels are wrapped, but the metal tracks at the top and bottom of each door are left bare. The wrap film is cut in a straight line along both tracks so the rollers can move freely. The track edges become visible seams, and the film stops exactly where the door channel begins.

Can the roof of a Vivant be wrapped?

Can the roof of a Vivant be wrapped? Yes, the roof panel of the Vivant is wrapped, and on a full wrap it uses part of the 64 ft (19.5 m) total. If the van has a sunroof, the film is cut around the glass opening and tucked under the seal. If roof rails are present, they are removed before the roof film is applied, or the film is cut to fit around their mounting feet.

Can I wrap only the hood or the roof of a Vivant?

Can I wrap only the hood or the roof of a Vivant? Yes, a partial wrap covers the roof, hood, and mirror caps as one package, or you can choose just one panel. The roof can be wrapped alone for a two-tone look, and the hood can be wrapped separately with a contrasting color. Chrome delete on the window trim and badges is another small job that does not touch the large body panels. Paint protection film on the front end is also a partial option that covers only the impact areas.