Wraps by car

Dodge 600 wrap

The Dodge 600 wrap page covers the first-generation mid-size sedan produced from 1983 to 1988. A complete vinyl wrap of this four-door body uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 64 ft (19.5 m) because pattern matching and trims add waste.

1generations15.5 mof film for a full wrap

Dodge 600, first generation, factory photo
Dodge 600, first generation. Factory color shown.

Dodge 600 wrap colors and ideas

  • Dodge 600 black wrap
  • Dodge 600 white wrap
  • Dodge 600 gray wrap
  • Dodge 600 silver wrap
  • Dodge 600 red wrap
  • Dodge 600 blue wrap
  • Dodge 600 green wrap
  • Dodge 600 yellow wrap
  • Dodge 600 orange wrap
  • Dodge 600 purple wrap
  • Dodge 600 pink wrap
  • Dodge 600 teal wrap
  • Dodge 600 brown wrap
  • Dodge 600 gold wrap
  • Dodge 600 chrome wrap
  • Dodge 600 color shift wrap
  • Dodge 600 carbon fiber wrap
  • Dodge 600 camo and patterned wrap

How much vinyl to wrap a Dodge 600

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1983–1988sedan (4 doors)185.2 in (4,704 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Dodge 600 wrap cost factors

Dodge 600 wrap cost depends on the film type, the amount of disassembly the shop performs and the condition of the panel surfaces. A full wrap uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film adds roughly 13 ft (4 m) more. Removing trim, handles and emblems takes extra labor, and paint repairs before wrapping also change the final quote.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Dodge 600 wraps by generation

Swipe sideways. Tap a card for the full description.

Dodge 600, first generation, factory photo
Factory color shown

1983–1988 Dodge 600 sedan (first generation)

1983–1988sedan (4 doors)185.2 in (4,704 mm)

The first-generation Dodge 600 was built from 1983 to 1988 as a four-door sedan that measures 185.2 in (4,704 mm) long. Paint age on a car of these years is the main check, since panels may be original or repainted and each surface reacts differently. A test spot on a cleaned area shows whether adhesion is reliable before a full wrap.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Dodge 600

For a Dodge 600 chrome delete, the wrap shop covers the bright trim around the side windows and the badges with black film. A partial wrap on this sedan is often the roof, hood and mirror caps rather than the whole body. Paint protection film (PPF), a clear urethane film, is another partial job that protects the front end from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Dodge 600: body, cut-outs and film

A Dodge 600 vinyl wrap is planned around one body style, a four-door sedan measuring 185.2 in (4,704 mm) long. That single body style simplifies ordering compared with cars that came as coupes and wagons. The full wrap estimate assumes standard cast film with careful seaming at the roof and rear pillars.

Dodge 600 wrap ideas begin with how the trim and handles are treated, because chrome trim surrounds the side glass and door handles interrupt the panels. The bumpers and belt moldings come off for a clean edge, while door handles are wrapped in place with relief cuts. Emblems are removed, cleaned and reinstalled to avoid obvious ridges.

To know how much vinyl to wrap a Dodge 600, count one generation only, since this page lists a single body for all production years. No dimensional changes are listed between 1983 and 1988, so the film estimate stays the same. The only variable is how much extra material the film design itself needs for matching.

Questions about wrapping a Dodge 600

How much vinyl does it take to wrap a Dodge 600?

A full wrap of a Dodge 600 takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned film job uses about 64 ft (19.5 m) because the pattern must be matched across panels.

Can I wrap only the hood or the roof of a Dodge 600?

Yes, you can wrap only the hood or the roof of a Dodge 600, and mirror caps are another common small area. A partial wrap on this sedan typically covers the roof, hood and mirror caps rather than the full body.

Is a Dodge 600 hard to wrap?

A Dodge 600 is a mid-size four-door sedan, and what adds work is the bright trim and the age of the painted surfaces. Chrome trim around the side glass and badges has to be removed or masked, and older paint may need spot repairs before film is applied.

How many generations of the Dodge 600 does this page cover?

This page covers one generation of the Dodge 600, the first-generation sedan built from 1983 to 1988.