Wraps by car

Dodge Aries wrap

The Dodge Aries wrap page covers the first-generation Aries, made from 1981 to 1989, and lists a full vinyl wrap of that body at about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Dodge Aries, first generation, factory photo
Dodge Aries, first generation. Factory color shown.

Dodge Aries wrap colors and ideas

  • Aries black wrap
  • Aries white wrap
  • Aries gray wrap
  • Aries silver wrap
  • Aries red wrap
  • Aries blue wrap
  • Aries green wrap
  • Aries yellow wrap
  • Aries orange wrap
  • Aries purple wrap
  • Aries pink wrap
  • Aries teal wrap
  • Aries brown wrap
  • Aries gold wrap
  • Aries chrome wrap
  • Aries color shift wrap
  • Aries carbon fiber wrap
  • Aries camo and patterned wrap

How much vinyl to wrap a Dodge Aries

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1981–1989sedan (2 or 4 doors)178.6 in (4,536 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Aries wrap cost factors

Aries wrap cost depends on the film area of the sedan and the labor for its doors and trim, not on a fixed package price. A full color change on the 178.6 in (4,536 mm) body uses about 51 ft (15.5 m) of 60-inch (1.52 m) film, while chrome film raises the material to about 62 ft (19 m). Prep time grows if the paint has chips, because bad spots show through the vinyl.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (2 or 4 doors).

Aries wraps by generation

Swipe sideways. Tap a card for the full description.

Dodge Aries, first generation, factory photo
Factory color shown

1981–1989 Aries sedan (first generation)

1981–1989sedan (2 or 4 doors)178.6 in (4,536 mm)

The first generation Dodge Aries ran from 1981 to 1989 as a sedan with two or four doors, and its panels may still carry original paint. On a car of these years, a test spot on each panel comes before a full wrap to confirm the film sticks. If the paint is original, a light sand of failed clear coat keeps the wrap from lifting.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an Aries

A partial wrap on an Aries can be the roof, the hood or the mirror caps for a two-tone look without covering the whole car. An Aries chrome delete covers the window trim and badges with black film for a cleaner line. Clear paint protection film (PPF) on the front end guards the hood, fenders and bumper from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Dodge Aries: body, cut-outs and film

The Dodge Aries vinyl wrap has to fit a compact sedan offered with two or four doors, and the body is 178.6 in (4,536 mm) long. A two-door car has longer front openings that call for precise cuts along each sill. The four-door shape adds two rear handles and smaller rear door panels to the job.

Aries wrap ideas start with the flat sides and simple nose of the car, which keep most panels within the width of a 60-inch roll. Door handles, mirrors, body moldings and the antenna come off or get cut out for a clean install. Bright window trim and badges are small parts that a chrome delete can cover in black film.

How much vinyl to wrap an Aries stays the same across the generation because the catalog lists only the 1981–1989 body. The sedan length of 178.6 in (4,536 mm) means a full color change uses about 51 ft (15.5 m) of cast film. Patterned or chrome film needs about 62 ft (19 m) to match the repeat and waste on the same panels.

Questions about wrapping a Dodge Aries

How much vinyl does it take to wrap a Dodge Aries?

A Dodge Aries takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap. That figure covers the sedan body of 178.6 in (4,536 mm) with normal waste at the edges. Chrome or patterned film needs about 62 ft (19 m) from the same width roll.

Can I wrap only the hood or the roof of an Aries?

Yes, you can wrap only the hood or the roof of an Aries as a partial job. The hood and roof are flat panels that match the film roll well, and mirror caps can be done at the same time. A separate chrome delete can black out the window trim and badges.

Is an Aries hard to wrap?

An Aries adds work at the trim, not in the main panels, because the flat sides of the 178.6 in (4,536 mm) body are simple to cover. The door handles, mirrors, moldings and antenna need cut-outs or removal. The wrap is not hard, but the small parts raise the time.

How many generations of the Aries does this page cover?

This page covers one generation of the Aries, the first one built from 1981 to 1989. No other generations are in the catalog, so the film figures stay the same for every year.