Wraps by car

Dodge Charger Daytona wrap

The Dodge Charger Daytona wrap guide covers the complete first generation of this 1968–1969 sports car. A full vinyl wrap of the coupe body uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, expect to order around 76 ft (23 m). The page also covers partial wraps, paint protection film, and chrome delete.

1generations18.5 mof film for a full wrap

Dodge Charger Daytona, first generation, factory photo
Dodge Charger Daytona, first generation. Factory color shown.

Dodge Charger Daytona wrap colors and ideas

  • Charger Daytona black wrap
  • Charger Daytona white wrap
  • Charger Daytona gray wrap
  • Charger Daytona silver wrap
  • Charger Daytona red wrap
  • Charger Daytona blue wrap
  • Charger Daytona green wrap
  • Charger Daytona yellow wrap
  • Charger Daytona orange wrap
  • Charger Daytona purple wrap
  • Charger Daytona pink wrap
  • Charger Daytona teal wrap
  • Charger Daytona brown wrap
  • Charger Daytona gold wrap
  • Charger Daytona chrome wrap
  • Charger Daytona color shift wrap
  • Charger Daytona carbon fiber wrap
  • Charger Daytona camo and patterned wrap

How much vinyl to wrap a Dodge Charger Daytona

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1968–1969coupe (2 doors)226.0 in (5,740 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Charger Daytona wrap cost factors

Charger Daytona wrap cost depends on the size of the car, the film type, and how much disassembly the job needs. The 1968–1969 coupe is 226.0 in (5,740 mm) long, which means a full wrap uses about 61 ft (18.5 m) of cast film. Chrome or patterned film raises the amount to about 76 ft (23 m). Paint condition also affects preparation time and therefore cost.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Charger Daytona wraps by generation

Swipe sideways. Tap a card for the full description.

Dodge Charger Daytona, first generation, factory photo
Factory color shown

1968–1969 Charger Daytona coupe (first generation)

1968–1969coupe (2 doors)226.0 in (5,740 mm)

The first generation Dodge Charger Daytona from 1968–1969 is a large coupe at 226.0 in (5,740 mm). On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap. The two long side doors are each one large piece of film. The wrap film estimate is about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

Two long side doors: each door is one large piece of film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Charger Daytona

A partial wrap on a Charger Daytona can cover the roof, hood, or mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film is clear film applied to the front end. These smaller jobs use less film than a full wrap and can be done on their own.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Dodge Charger Daytona: body, cut-outs and film

A Dodge Charger Daytona vinyl wrap works with one body style: a long two-door coupe measuring 226.0 in (5,740 mm). The long side doors take one large piece of film each, which helps the wrap look clean. The large roof and long hood add to the material needed for a full wrap. The car has a wide tail section that requires careful film layout.

Charger Daytona wrap ideas often include covering the side doors as single large panels. The two long side doors each take one large piece of film, so film seams are easy to hide. You may also wrap the roof, hood, mirror caps, or apply chrome delete to window trim and badges. Paint protection film on the front end is another option for this car.

When calculating how much vinyl to wrap a Charger Daytona, the only generation is the 1968–1969 coupe. The same body dimensions apply to every car in this page. For standard cast film you need about 61 ft (18.5 m) of 60-inch (1.52 m) material. If you choose chrome or patterned film, plan for about 76 ft (23 m).

Questions about wrapping a Dodge Charger Daytona

How much vinyl does it take to wrap a Dodge Charger Daytona?

A full wrap of a Dodge Charger Daytona takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, the amount rises to about 76 ft (23 m). The car is 226.0 in (5,740 mm) long, so the wrap covers a large area.

Can I wrap only the hood or the roof of a Charger Daytona?

Yes, you can wrap only the hood or the roof of a Charger Daytona. A partial wrap on this car can also include the mirror caps. Chrome delete covers the window trim and badges, and paint protection film goes on the front end. These smaller jobs use less film than a full wrap.

Is a Charger Daytona hard to wrap?

A Charger Daytona is not the easiest car to wrap because of its size and body lines. The car is 226.0 in (5,740 mm) long, which means more film and more handling. The two long side doors are each one large piece of film, so you need a helper or a steady hand. The wide tail area also needs careful film positioning.

How many generations of the Charger Daytona does this page cover?

This page covers one generation of the Dodge Charger Daytona. The first generation ran from 1968 to 1969. It was offered only as a two-door coupe.