Wraps by car

Dodge Lancer wrap

This page covers the Dodge Lancer wrap and vinyl wrap film for the single generation sold from 1985 to 1989. The car is a mid-size five-door liftback that measures 182.7 in (4,640 mm) long. A full wrap of the body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Dodge Lancer, first generation, factory photo
Dodge Lancer, first generation. Factory color shown.

Dodge Lancer wrap colors and ideas

  • Lancer black wrap
  • Lancer white wrap
  • Lancer gray wrap
  • Lancer silver wrap
  • Lancer red wrap
  • Lancer blue wrap
  • Lancer green wrap
  • Lancer yellow wrap
  • Lancer orange wrap
  • Lancer purple wrap
  • Lancer pink wrap
  • Lancer teal wrap
  • Lancer brown wrap
  • Lancer gold wrap
  • Lancer chrome wrap
  • Lancer color shift wrap
  • Lancer carbon fiber wrap
  • Lancer camo and patterned wrap

How much vinyl to wrap a Dodge Lancer

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1985–1989liftback (5 doors)182.7 in (4,640 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Lancer wrap cost factors

Lancer wrap cost depends on the size of the car, the film you pick and how much of the body you cover. A full wrap of this 182.7 in (4,640 mm) liftback needs about 52 ft (16 m) of standard cast film. Jobs like a roof or hood use less film, while chrome delete or front-end paint protection film (PPF) change the scope.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: liftback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Lancer wraps by generation

Swipe sideways. Tap a card for the full description.

Dodge Lancer, first generation, factory photo
Factory color shown

1985–1989 Lancer liftback (first generation)

1985–1989liftback (5 doors)182.7 in (4,640 mm)

The first generation Dodge Lancer spans 1985 to 1989 and is the only generation in this catalog. Paint age matters on a car of these years because panels may be original or repainted. A test spot on each panel comes before a full wrap to check how the film adheres.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Lancer

A partial wrap on a Lancer can cover the roof, hood or mirror caps while the rest stays painted. Lancer chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Dodge Lancer: body, cut-outs and film

The Dodge Lancer vinyl wrap starts with one body style: a five-door liftback. Its 182.7 in (4,640 mm) length makes it a mid-size car, so you wrap four doors, two bumpers, the roof and the tailgate. The tailgate carries the rear glass, which changes how you trim the film across the back.

Lancer wrap ideas begin with the tailgate where the rear glass is set into the panel. The film ends at the edge of the glass, so that outline is cut and finished carefully. You also remove or work around the badges, door handles, mirrors and the trim around the side windows.

To know how much vinyl to wrap a Lancer, count one generation with fixed dimensions. All cars from 1985 to 1989 share the same 182.7 in (4,640 mm) body, so the film estimate stays the same. The only real change is paint age, which can vary between original and repainted panels.

Questions about wrapping a Dodge Lancer

How much vinyl does it take to wrap a Dodge Lancer?

A Dodge Lancer takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full wrap. That estimate is for the newest body, which is the only generation from 1985 to 1989. Chrome or patterned film uses about 66 ft (20 m) for the same car.

Can I wrap only the hood or the roof of a Lancer?

Yes, you can wrap only the hood or the roof of a Lancer. A partial wrap on this car may cover the roof, hood or mirror caps. You can also add chrome delete on the window trim and badges or paint protection film on the front end.

Is a Lancer hard to wrap?

A Lancer is not especially hard to wrap, but the tailgate adds work. The rear glass sits in that tailgate, so the film ends at the edge of the glass and needs a clean cut. The car is 182.7 in (4,640 mm) long, so a full wrap is a standard mid-size job.

How many generations of the Lancer does this page cover?

This page covers one generation of the Dodge Lancer. The first generation ran from 1985 to 1989 and is the only generation in the catalog.