Wraps by car

Dodge Raider wrap

The Dodge Raider wrap page covers the first generation (1986–1989), the only generation of this SUV in the catalog. A full vinyl wrap of this three-door body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 67 ft (20.5 m).

1generations16.5 mof film for a full wrap

Dodge Raider, first generation, factory photo
Dodge Raider, first generation. Factory color shown.

Dodge Raider wrap colors and ideas

  • Raider black wrap
  • Raider white wrap
  • Raider gray wrap
  • Raider silver wrap
  • Raider red wrap
  • Raider blue wrap
  • Raider green wrap
  • Raider yellow wrap
  • Raider orange wrap
  • Raider purple wrap
  • Raider pink wrap
  • Raider teal wrap
  • Raider brown wrap
  • Raider gold wrap
  • Raider chrome wrap
  • Raider color shift wrap
  • Raider carbon fiber wrap
  • Raider camo and patterned wrap

How much vinyl to wrap a Dodge Raider

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1986–1989SUV (3 doors)157.3 in (3,995 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Raider wrap cost factors

Raider wrap cost depends mainly on the film area, which is about 54 ft (16.5 m) for standard cast vinyl. The roof height of 72.8 in (1,850 mm) adds labor because installers work from a platform. Long doors and the glass tailgate also affect how many hours a full wrap takes.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • A tall body (72.8 in (1,850 mm)): the roof is wrapped from a platform.

Raider wraps by generation

Swipe sideways. Tap a card for the full description.

Dodge Raider, first generation, factory photo
Factory color shown

1986–1989 Raider SUV (first generation)

1986–1989SUV (3 doors)157.3 in (3,995 mm)

The first generation Dodge Raider is 72.8 in (1,850 mm) tall, so its roof is wrapped from a platform. That extra step adds time to the installation compared with lower vehicles. The length of 157.3 in (3,995 mm) also keeps the job on one roll of film without extra seams.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

A tall body (72.8 in (1,850 mm)): the roof is wrapped from a platform.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Raider

On a Raider, a partial wrap can cover the roof, the hood, or the mirror caps only. Chrome delete turns the window trim and badges into black film for a cleaner look. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Dodge Raider: body, cut-outs and film

The Dodge Raider vinyl wrap is shaped by a short three-door SUV body that is 157.3 in (3,995 mm) long. A single body style with two long side doors means each side has fewer, larger film pieces. The tall body (72.8 in (1,850 mm)) brings the roof into the wrap area, so film is also laid on top from a platform.

Raider wrap ideas have to work around a tailgate that carries the rear glass, so the film ends at the edge of that glass. Each long side door is covered with one large piece of film rather than several small sections. The roof is wrapped from a platform because the body stands 72.8 in (1,850 mm) tall.

For anyone counting how much vinyl to wrap a Raider, there is only one generation to measure. The first generation (1986–1989) is the body in the catalog, so the film estimate does not change between years. That keeps material planning simple: one set of dimensions covers every Raider.

Questions about wrapping a Dodge Raider

How much vinyl does it take to wrap a Dodge Raider?

Yes, a full wrap of a Dodge Raider takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate rises to about 67 ft (20.5 m). These figures are for the first-generation body, the only one in the catalog.

Can I wrap only the hood or the roof of a Raider?

Yes, you can wrap only the hood or the roof of a Raider. A partial wrap on this car also commonly covers the mirror caps. Chrome delete is another option, covering the window trim and badges with black film.

Is a Raider hard to wrap?

Yes, a Raider is a bit harder to wrap than a flat, low car. The body is 72.8 in (1,850 mm) tall, so the roof is wrapped from a platform. The tailgate has the rear glass in it, which means the film has to end cleanly at the glass edge.

How many generations of the Raider does this page cover?

One generation. This page covers the first generation of the Dodge Raider, produced from 1986 to 1989. That is the only body style listed in the catalog.