Wraps by car

Opel Adam wrap

This page covers the Opel Adam wrap and the vinyl wrap it takes for a full color change. The Opel Adam is a mini three-door hatchback built from 2012 to 2019, and the catalog lists one generation. A complete wrap of the newest body uses about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Opel Adam, first generation, factory photo
Opel Adam, first generation. Factory color shown.

Opel Adam wrap colors and ideas

  • Adam black wrap
  • Adam white wrap
  • Adam gray wrap
  • Adam silver wrap
  • Adam red wrap
  • Adam blue wrap
  • Adam green wrap
  • Adam yellow wrap
  • Adam orange wrap
  • Adam purple wrap
  • Adam pink wrap
  • Adam teal wrap
  • Adam brown wrap
  • Adam gold wrap
  • Adam chrome wrap
  • Adam color shift wrap
  • Adam carbon fiber wrap
  • Adam camo and patterned wrap

How much vinyl to wrap an Opel Adam

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2019hatchback (3 doors)145.6 in (3,698 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Adam wrap cost factors

Adam wrap cost depends mostly on the film and the work the 145.6 in (3,698 mm) body demands. A full wrap uses about 49 ft (15 m) of cast film, and a chrome or patterned film raises that to about 57 ft (17.5 m). The front bumper with fog lamps and the tailgate with glass in it add cut-out time for the installer. The two large door panels can also raise labor time because each door is one piece that must be handled carefully.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Adam wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Adam, first generation, factory photo
Factory color shown

2012–2019 Adam hatchback (first generation)

2012–2019hatchback (3 doors)145.6 in (3,698 mm)

The first generation Opel Adam was built from 2012 through 2019 as a three-door hatchback. On a car of these years the paint may be original or repainted, so an installer does a test spot before a full wrap. The body length is 145.6 in (3,698 mm), and the wrap film estimate stays close to the same for every car of this generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an Adam

A partial wrap on an Opel Adam can cover the roof, the hood, or the mirror caps as separate jobs. An Adam chrome delete covers the window trim and the badges with black film instead of the bright finish. Paint protection film (PPF) can be applied as a clear film on the front end to guard the bumper and the hood.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Opel Adam: body, cut-outs and film

An Opel Adam vinyl wrap has to cover the compact 145.6 in (3,698 mm) three-door hatchback body. The short overall length keeps the roof and the rear bumper small, so these panels need less film than on a longer car. The two long side doors are tall relative to the car, and each door is wrapped as one large piece of film.

Adam wrap ideas still have to work around the body details that need extra cut-outs. Every trim has fog lamps in the front bumper, so the bumper film needs precise cut-outs around those lamps. The tailgate carries the rear glass in it, and the film ends at the edge of the glass rather than wrapping around a separate frame. The two long side doors are each covered with one large piece of film, which keeps the sides clean.

To know how much vinyl to wrap an Adam, you count the body you have because only one generation is listed. The single generation runs from 2012 to 2019, and its body panels do not change in the catalog. The film estimate for a full wrap of this body is about 49 ft (15 m) of 60-inch (1.52 m) cast film. If you choose a chrome or patterned film, plan for about 57 ft (17.5 m) instead.

Questions about wrapping an Opel Adam

How much vinyl does it take to wrap an Opel Adam?

About 49 ft (15 m) of 60-inch (1.52 m) cast film is the estimate to wrap an Opel Adam fully. That figure covers the single hatchback body of the years 2012 to 2019. If you use a chrome or patterned film, the estimate rises to about 57 ft (17.5 m).

Can I wrap only the hood or the roof of an Adam?

Yes, you can wrap only the hood or the roof of an Adam instead of the whole car. A partial wrap on the Opel Adam can cover the roof, the hood, or the mirror caps as separate jobs. This keeps the work smaller and uses far less film than a full change.

Is an Adam hard to wrap?

An Adam is not the easiest wrap, mainly because of the front bumper and the tailgate. Every trim has fog lamps in the front bumper, so the film needs cut-outs that add work. The tailgate has the rear glass in it, and the film ends at the edge of the glass, which leaves a clean but careful edge to lay. The long side doors are large single pieces that also need a steady hand.

How many generations of the Adam does this page cover?

This page covers one generation of the Opel Adam. The catalog lists a single generation built from 2012 to 2019 as a mini three-door hatchback.