Wraps by car

Opel Insignia OPC wrap

This page covers the Opel Insignia OPC, the performance version of the first-generation Insignia. The catalog includes one generation, produced from 2009 to 2017. A full vinyl wrap of the newest body takes about 59 ft (18 m) for the sedan and up to 67 ft (20.5 m) for the wagon.

1generations19.5 mof film for a full wrap

Opel Insignia OPC, first generation, factory photo
Opel Insignia OPC, first generation. Factory color shown.

Opel Insignia OPC wrap colors and ideas

  • Insignia OPC black wrap
  • Insignia OPC white wrap
  • Insignia OPC gray wrap
  • Insignia OPC silver wrap
  • Insignia OPC red wrap
  • Insignia OPC blue wrap
  • Insignia OPC green wrap
  • Insignia OPC yellow wrap
  • Insignia OPC orange wrap
  • Insignia OPC purple wrap
  • Insignia OPC pink wrap
  • Insignia OPC teal wrap
  • Insignia OPC brown wrap
  • Insignia OPC gold wrap
  • Insignia OPC chrome wrap
  • Insignia OPC color shift wrap
  • Insignia OPC carbon fiber wrap
  • Insignia OPC camo and patterned wrap

How much vinyl to wrap an Opel Insignia OPC

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2017liftback, sedan, wagon (4 or 5 doors)190.2 in (4,830 mm) to 193.2 in (4,908 mm)about 59 ft (18 m) for the sedan to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)

Insignia OPC wrap cost factors

Insignia OPC wrap cost depends mainly on the size of the body and the film chosen. The car is between 190.2 in (4,830 mm) and 193.2 in (4,908 mm) long, and a full wrap uses from 59 ft (18 m) to 67 ft (20.5 m) of standard film. Cut-outs for parking sensors, cameras, and fog lamps add labour time. Special finishes like chrome or patterned film can raise the amount to about 76 ft (23 m).

  • Film for a full wrap: about 59 ft (18 m) for the sedan to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).
  • Body: liftback, sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2013: bumpers and lights differ between the versions, and so do the film cuts.

Insignia OPC wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Insignia OPC, first generation, factory photo
Factory color shown

2009–2017 Insignia OPC liftback, sedan, wagon (first generation)

2009–2017liftback, sedan, wagon (4 or 5 doors)190.2 in (4,830 mm) to 193.2 in (4,908 mm)

The first generation Opel Insignia OPC was produced from 2009 to 2017 in liftback, sedan, and wagon forms. In 2013 the car was restyled, and the bumpers and lights changed, so film cut for one version does not fit the other. The length varies from 190.2 in (4,830 mm) to 193.2 in (4,908 mm), which affects the amount of vinyl. A full wrap needs between 59 ft (18 m) and 67 ft (20.5 m), depending on body style.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) for the sedan to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Roof, hood, chrome delete and PPF on an Insignia OPC

A partial wrap on the Insignia OPC can cover the roof, hood, or mirror caps only. An Insignia OPC chrome delete changes the bright window trim and badges to black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs need less material than a full wrap and are easier to install around sensors and lights.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Opel Insignia OPC: body, cut-outs and film

The Opel Insignia OPC vinyl wrap requires precise planning because the car was sold as a liftback, sedan, and wagon. The length ranges from 190.2 in (4,830 mm) to 193.2 in (4,908 mm), with the wagon being the longest. A full wrap covers more film on the wagon, and the liftback's large tailgate needs careful handling. The mid-size body has long roof and door panels, so an installer will use 60-inch (1.52 m) cast film to minimize seams.

Good Insignia OPC wrap ideas start with the parts that need cut-outs or removal. The tailgate has the rear glass in it, so the film ends at the edge of the glass on every version. Every trim has parking sensors in the bumpers, and the film must be cut around each sensor. Some trims have cameras in the body and fog lamps in the front bumper, which require cut-outs for each lens.

When you calculate how much vinyl to wrap an Insignia OPC, the body style sets the base amount. The sedan uses about 59 ft (18 m), while the wagon needs up to 67 ft (20.5 m). A restyling in 2013 changed the bumpers and lights, so film kits for earlier and later cars are not interchangeable. For chrome or patterned film, plan for up to about 76 ft (23 m).

Questions about wrapping an Opel Insignia OPC

How much vinyl does it take to wrap an Opel Insignia OPC?

A full wrap of an Opel Insignia OPC takes about 59 ft (18 m) for the sedan and up to 67 ft (20.5 m) for the wagon. Use 60-inch (1.52 m) cast film for the main panels. Special chrome or patterned film can require up to about 76 ft (23 m).

Which years of the Insignia OPC take the same film cuts?

Pre-2013 and post-2013 Insignia OPC models do not share the same film cuts. The first generation ran from 2009 to 2017, and the 2013 restyling altered the bumpers and lights. An installer must use the correct template for each version.

Which Insignia OPC body takes more film?

The Opel Insignia OPC wagon takes more film than the sedan or liftback. The wagon needs up to 67 ft (20.5 m), while the sedan uses about 59 ft (18 m). The extra rear bodywork and longer roofline account for the difference.

Can I wrap only the hood or the roof of an Insignia OPC?

Yes, you can wrap only the hood or the roof of an Insignia OPC. A partial wrap is a common way to change the look without full coverage. Mirror caps, chrome delete on window trim and badges, and clear paint protection film (PPF) on the front end are also options.