Wraps by car

Opel Vectra wrap

The Opel Vectra wrap page covers all three generations of this mid-size car, from 1988 to 2009. A vinyl wrap on the newest Vectra body takes about 52 ft (16 m) of film for the liftback and up to 66 ft (20 m) for the wagon. The page lists film estimates, body styles, and the parts that need extra care for each generation.

3generations20 mof film for a full wrap

Opel Vectra, third generation, factory photo
Opel Vectra, third generation. Factory color shown.

Opel Vectra wrap colors and ideas

  • Vectra black wrap
  • Vectra white wrap
  • Vectra gray wrap
  • Vectra silver wrap
  • Vectra red wrap
  • Vectra blue wrap
  • Vectra green wrap
  • Vectra yellow wrap
  • Vectra orange wrap
  • Vectra purple wrap
  • Vectra pink wrap
  • Vectra teal wrap
  • Vectra brown wrap
  • Vectra gold wrap
  • Vectra chrome wrap
  • Vectra color shift wrap
  • Vectra carbon fiber wrap
  • Vectra camo and patterned wrap

How much vinyl to wrap an Opel Vectra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2002–2009liftback, sedan, wagon (4 or 5 doors)180.9 in (4,596 mm) to 190.5 in (4,839 mm)about 52 ft (16 m) for the liftback to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)
1995–2003liftback, sedan, wagon (4 or 5 doors)177.0 in (4,495 mm)about 51 ft (15.5 m) for the liftback to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)
1988–1995liftback, sedan (4 or 5 doors)171.3 in (4,352 mm) to 174.5 in (4,432 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Vectra wrap cost factors

Vectra wrap cost depends on the size of the car, the film you choose, and the work on the body. A full wrap of the third generation takes about 52 ft (16 m) to 66 ft (20 m) of cast film, and the wagon needs more material than the liftback. Chrome or patterned film can raise the amount to about 74 ft (22.5 m) on the newest body. Cut-outs for fog lamps or trim removal add time and labor.

  • Film for a full wrap: about 52 ft (16 m) for the liftback to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).
  • Body: liftback, sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2005: bumpers and lights differ between the versions, and so do the film cuts.

Vectra wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Vectra, third generation, factory photo
Factory color shown

2002–2009 Vectra liftback, sedan, wagon (third generation)

2002–2009liftback, sedan, wagon (4 or 5 doors)180.9 in (4,596 mm) to 190.5 in (4,839 mm)

The restyling in 2005 changed the bumpers and lights on the third generation Opel Vectra. Film cut for one version does not fit the other, so you need to know which version the car is. The restyled cars started production in 2005 and run to 2009.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) for the liftback to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Opel Vectra, second generation, factory photo
Factory color shown

1995–2003 Vectra liftback, sedan, wagon (second generation)

1995–2003liftback, sedan, wagon (4 or 5 doors)177.0 in (4,495 mm)

The second generation Opel Vectra covers 1995 to 2003, but its final years overlap with the newer body. Cars from 2002 to 2003 could be either generation, so the owner must check which body the car has. The second generation was restyled in 1999, but the film cuts stay the same.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the liftback to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Opel Vectra, first generation, factory photo
Factory color shown

1988–1995 Vectra liftback, sedan (first generation)

1988–1995liftback, sedan (4 or 5 doors)171.3 in (4,352 mm) to 174.5 in (4,432 mm)

The first generation Opel Vectra is from 1988 to 1995 and often has older paint. Panels may be original or repainted, so a test spot comes before a full wrap. The installer checks that the film sticks well to every panel before the job.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Vectra

Partial wrap jobs on an Opel Vectra include the roof, hood, or mirror caps. Vectra chrome delete covers the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end protects the bumper, hood, and fenders.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Opel Vectra: body, cut-outs and film

An Opel Vectra vinyl wrap has to follow the body styles and sizes of each generation. The third generation runs from 180.9 in (4,596 mm) to 190.5 in (4,839 mm) long, and the wagon takes the most film. The first and second generations are shorter, so they use less material than the later cars.

Vectra wrap ideas should include the cut-outs and parts that come off before the film goes on. Every generation has a tailgate with the rear glass in it, so the film ends at the edge of the glass. Some trims of the third generation have fog lamps in the front bumper, which means cut-outs in the bumper film.

How much vinyl to wrap a Vectra changes from one generation to the next. The first generation needs about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. The second generation takes about 51 ft (15.5 m) for the liftback and 59 ft (18 m) for the wagon. The third generation is the largest and needs up to 66 ft (20 m) for the wagon.

Questions about wrapping an Opel Vectra

How much vinyl does it take to wrap an Opel Vectra?

A full wrap of the newest Opel Vectra takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for the liftback. For the wagon the estimate goes up to 66 ft (20 m) because of the larger body.

Which years of the Vectra take the same film cuts?

The same film cuts fit the Opel Vectra within one generation and before a restyling. The third generation from 2002 to 2005 uses one set of cuts, and the restyled version from 2005 to 2009 uses another. The second generation from 1995 to 2003 keeps one set of cuts through its 1999 restyling. The first generation from 1988 to 1995 uses its own cuts.

Which Vectra body takes more film?

The wagon body of the Opel Vectra takes more film than the liftback or sedan in every generation. In the third generation the wagon needs about 66 ft (20 m) while the liftback needs about 52 ft (16 m). The same pattern holds for the second generation, where the wagon takes about 59 ft (18 m) and the liftback about 51 ft (15.5 m).

Can I wrap only the hood or the roof of a Vectra?

Yes, you can wrap only the hood or the roof of an Opel Vectra. A partial wrap can cover the roof, hood, or mirror caps as separate jobs. A chrome delete on the window trim and badges is another smaller option.