Wraps by car

Opel Karl wrap

The Opel Karl wrap page covers the first generation hatchback produced from 2015 to 2019. A full vinyl wrap of the newest body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The page details the one body style and the film amount for a complete color change.

1generations14.5 mof film for a full wrap

Opel Karl, first generation, factory photo
Opel Karl, first generation. Factory color shown.

Opel Karl wrap colors and ideas

  • Karl black wrap
  • Karl white wrap
  • Karl gray wrap
  • Karl silver wrap
  • Karl red wrap
  • Karl blue wrap
  • Karl green wrap
  • Karl yellow wrap
  • Karl orange wrap
  • Karl purple wrap
  • Karl pink wrap
  • Karl teal wrap
  • Karl brown wrap
  • Karl gold wrap
  • Karl chrome wrap
  • Karl color shift wrap
  • Karl carbon fiber wrap
  • Karl camo and patterned wrap

How much vinyl to wrap an Opel Karl

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–2019hatchback (5 doors)144.7 in (3,675 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Karl wrap cost factors

Karl wrap cost depends on the film type and the labor involved in covering the 3,675 mm long body. A standard color change uses about 48 ft (14.5 m) of 60-inch film. If you add chrome or patterned film, the amount rises to about 56 ft (17 m). The final cost also changes with how many separate panels the installer handles.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Karl wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Karl, first generation, factory photo
Factory color shown

2015–2019 Karl hatchback (first generation)

2015–2019hatchback (5 doors)144.7 in (3,675 mm)

The first generation Opel Karl is a five-door hatchback with a length of 144.7 in (3,675 mm). A full wrap needs about 48 ft (14.5 m) of standard cast film. The shape is made of straightforward panels, so the film amount stays close to that estimate.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Karl

A partial wrap on the Karl can cover the roof, the hood, or the mirror caps. Karl chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is an option for the front end, using a clear film to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Opel Karl: body, cut-outs and film

The Opel Karl vinyl wrap deals with a compact five-door hatchback that is 144.7 in (3,675 mm) long. Its small size means a full wrap uses less film than most cars. The simple body shape has few complex curves, so the film lays down with little stretching.

Karl wrap ideas start with the tailgate, where the rear glass is set into the metal panel. The film ends at the edge of the glass, leaving that area uncovered. You can choose a contrasting color for the tailgate to change the rear look.

To figure out how much vinyl to wrap a Karl, use the estimate of about 48 ft (14.5 m) for the standard film. If you pick a chrome or patterned film, plan for about 56 ft (17 m). There is only one generation, so every Karl needs the same film amount.

Questions about wrapping an Opel Karl

How much vinyl does it take to wrap an Opel Karl?

It takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film to wrap an Opel Karl fully. If you choose a chrome or patterned film, the amount is about 56 ft (17 m). These figures cover the only body style of this car.

Can I wrap only the hood or the roof of a Karl?

Yes, you can wrap only the hood or the roof of a Karl as a partial job. The partial wrap options also include the mirror caps. Chrome delete on the window trim and badges is another limited job for this car.

Is a Karl hard to wrap?

A Karl is not hard to wrap, but the tailgate adds work because the rear glass sits inside the metal panel. The installer must cut the film carefully at the edge of the glass. Its small size and simple curves make the rest of the job straightforward.

How many generations of the Karl does this page cover?

This page covers one generation of the Opel Karl, the first generation. It was produced from 2015 to 2019 as a five-door hatchback. All wrap data on this page refer to that single generation.