Wraps by car

Opel Frontera wrap

This page covers vinyl wrap for the Opel Frontera across all three generations. The newest body is the third generation, a five-door SUV produced from 2024 onward. A full wrap of that newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan on about 67 ft (20.5 m).

3generations18 mof film for a full wrap

Opel Frontera, third generation, factory photo
Opel Frontera, third generation. Factory color shown.

Opel Frontera wrap colors and ideas

  • Frontera black wrap
  • Frontera white wrap
  • Frontera gray wrap
  • Frontera silver wrap
  • Frontera red wrap
  • Frontera blue wrap
  • Frontera green wrap
  • Frontera yellow wrap
  • Frontera orange wrap
  • Frontera purple wrap
  • Frontera pink wrap
  • Frontera teal wrap
  • Frontera brown wrap
  • Frontera gold wrap
  • Frontera chrome wrap
  • Frontera color shift wrap
  • Frontera carbon fiber wrap
  • Frontera camo and patterned wrap

How much vinyl to wrap an Opel Frontera

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowSUV (5 doors)173.2 in (4,400 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1998–2003SUV (3 or 5 doors)168.0 in (4,268 mm) to 183.4 in (4,658 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
1991–1998SUV (3 or 5 doors)165.0 in (4,192 mm) to 184.7 in (4,692 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Frontera wrap cost factors

Frontera wrap cost depends on the size of the vehicle, the film type, and the labor for its details. The third generation is 173.2 in (4,400 mm) long, while older models range from 165.0 in (4,192 mm) to 184.7 in (4,692 mm). Chrome or patterned film increases the amount of film needed by about 8 to 11 ft (2.5 to 3.5 m). Cut-outs for sensors, cameras, and the tailgate glass add time to the installation.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Frontera wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Frontera, third generation, factory photo
Factory color shown

2024–now Frontera SUV (third generation)

2024–nowSUV (5 doors)173.2 in (4,400 mm)

The third-generation Opel Frontera has roof rails that affect the roof wrap. The roof rails come off before the roof is wrapped, or the film is cut along them. This choice changes the finish and the labor involved. Removing the rails gives a seamless roof, while cutting along them keeps the factory look.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Opel Frontera, second generation, factory photo
Factory color shown

1998–2003 Frontera SUV (second generation)

1998–2003SUV (3 or 5 doors)168.0 in (4,268 mm) to 183.4 in (4,658 mm)

The second-generation Opel Frontera was restyled in 2001, and the bumpers and lights changed. Film cut for one version does not fit the other, so a template from 1998 will not match a 2002 model. The wrap installer must confirm which version is in the shop. This affects pre-cut kits and partial bumper wraps.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (69.1 in (1,755 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Opel Frontera, first generation, factory photo
Factory color shown

1991–1998 Frontera SUV (first generation)

1991–1998SUV (3 or 5 doors)165.0 in (4,192 mm) to 184.7 in (4,692 mm)

The first-generation Opel Frontera from 1991 to 1998 often has paint age concerns. Panels may be original or repainted, and a test spot comes before a full wrap. The test spot checks adhesion on the old paint. A repainted panel can react differently to the film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (69.0 in (1,753 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Frontera

A partial wrap on a Frontera covers the roof, hood, or mirror caps. Frontera chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These jobs use less film than a full wrap and focus on high-impact or accent areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Opel Frontera: body, cut-outs and film

An Opel Frontera vinyl wrap covers a boxy SUV body with large flat panels. The third generation measures 173.2 in (4,400 mm) long, which means fewer seams and efficient film use. Older generations range from 165.0 in (4,192 mm) to 184.7 in (4,692 mm) in length. The three- and five-door styles change how much film goes into the rear quarters.

Frontera wrap ideas should account for several parts that need extra work. Every third-generation trim has parking sensors in the bumpers, so the film is cut around each sensor. Cameras in the body and fog lamps in the front bumper also require precise cut-outs. The tailgate has the rear glass set into it, and the film ends at the edge of the glass.

Knowing how much vinyl to wrap a Frontera means looking at the three generations. The first generation (1991–1998) needs about 62 ft (19 m) of cast film for a full wrap. The second generation (1998–2003) needs about 61 ft (18.5 m). The third generation is slightly shorter and needs about 59 ft (18 m).

Questions about wrapping an Opel Frontera

How much vinyl does it take to wrap an Opel Frontera?

A full wrap of an Opel Frontera takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for the newest body. With chrome or patterned film, the amount rises to about 67 ft (20.5 m). Older generations need slightly more film, up to 62 ft (19 m) for the first generation.

Can I wrap only the hood or the roof of a Frontera?

Yes, you can wrap only the hood or the roof of a Frontera. A partial wrap often includes the roof, hood, or mirror caps. Chrome delete is another popular partial job for the window trim and badges. Paint protection film on the front end is also a partial application.

Is a Frontera hard to wrap?

The Opel Frontera is not especially hard to wrap, but it has details that add work. Every third-generation trim has parking sensors in the bumpers, and the film is cut around each sensor. Cameras and fog lamps also need cut-outs. The tall body of the older models means the roof is wrapped from a platform.

How many generations of the Frontera does this page cover?

This page covers three generations of the Opel Frontera. The first generation ran from 1991 to 1998, the second from 1998 to 2003, and the third from 2024 onward. Each generation has its own body dimensions and wrap considerations.