Wraps by car

Opel Cascada wrap

The Opel Cascada wrap page covers the single generation of this compact convertible, produced from 2013 to 2019. A full vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 64 ft (19.5 m).

1generations15 mof film for a full wrap

Opel Cascada, first generation, factory photo
Opel Cascada, first generation. Factory color shown.

Opel Cascada wrap colors and ideas

  • Cascada black wrap
  • Cascada white wrap
  • Cascada gray wrap
  • Cascada silver wrap
  • Cascada red wrap
  • Cascada blue wrap
  • Cascada green wrap
  • Cascada yellow wrap
  • Cascada orange wrap
  • Cascada purple wrap
  • Cascada pink wrap
  • Cascada teal wrap
  • Cascada brown wrap
  • Cascada gold wrap
  • Cascada chrome wrap
  • Cascada color shift wrap
  • Cascada carbon fiber wrap
  • Cascada camo and patterned wrap

How much vinyl to wrap an Opel Cascada

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2019convertible (2 doors)184.9 in (4,696 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Cascada wrap cost factors

Cascada wrap cost depends on the size of the car, the film chosen, and the labor for a 184.9 in (4,696 mm) convertible. A standard color change takes about 49 ft (15 m) of cast film, while chrome or patterned film takes about 64 ft (19.5 m). The wrap price rises with more complex films and the extra work around the roof and trim.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Cascada wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Cascada, first generation, factory photo
Factory color shown

2013–2019 Cascada convertible (first generation)

2013–2019convertible (2 doors)184.9 in (4,696 mm)

In a wrap of the first generation Opel Cascada, a fabric top is not wrapped and the film ends where the fabric begins. A folding hard top is wrapped as panels of its own instead of being covered with the body film. The film line around the convertible opening must be cut cleanly because the top moves during use.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Cascada

On an Opel Cascada, a partial wrap can cover the hood, mirror caps, and rear deck without wrapping the whole car. Cascada chrome delete covers the window trim and badges with black film. Paint protection film (PPF) in a clear film on the front end is another option for this model.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Opel Cascada: body, cut-outs and film

An Opel Cascada vinyl wrap is planned around one body style: a 2-door convertible that is 184.9 in (4,696 mm) long. A car of this size needs about 49 ft (15 m) of standard cast film for full coverage. The compact dimensions mean there are no large roof or rear side surfaces to cover.

Cascada wrap ideas begin with the parts that add time: door handles, mirrors, and badges need cut-outs or removal. The front bumper and grille area require precise trimming. A convertible body means the film ends where the fabric or folding top begins, so no film goes over the top.

To work out how much vinyl to wrap a Cascada, you only need one generation because the catalog lists a single body from 2013 to 2019. All film estimates for this car use the same length figure of about 49 ft (15 m). A color change wrap in chrome or a patterned film changes the number to about 64 ft (19.5 m).

Questions about wrapping an Opel Cascada

How much vinyl does it take to wrap an Opel Cascada?

An Opel Cascada takes about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl for a full wrap. If you use chrome or patterned film, the estimate rises to about 64 ft (19.5 m).

Is the top of a Cascada wrapped?

No, the top of an Opel Cascada is not wrapped. If the car has a fabric top, the film ends where the fabric begins. If the top is a folding hard type, each panel is wrapped separately from the body film.

Can I wrap only the hood or the roof of a Cascada?

Yes, you can wrap only the hood or the rear deck of an Opel Cascada. A partial wrap on this car commonly includes the hood, mirror caps, and rear deck. You can also do a chrome delete on the window trim and badges or a clear paint protection film (PPF) on the front end.

Is a Cascada hard to wrap?

An Opel Cascada adds work because it is a convertible. The film must be cut cleanly where the body meets the top, and you cannot simply run vinyl over a fabric roof. At 184.9 in (4,696 mm) long, the car is compact, but the door, bumper, and trim areas still need careful trimming.