Wraps by car

Opel Antara wrap

The Opel Antara wrap covers the first generation of this mid-size SUV, produced from 2006 to 2015. A full vinyl wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the amount rises to about 77 ft (23.5 m). The page details the wrap process, from body styles to film cuts.

1generations19 mof film for a full wrap

Opel Antara, first generation, factory photo
Opel Antara, first generation. Factory color shown.

Opel Antara wrap colors and ideas

  • Antara black wrap
  • Antara white wrap
  • Antara gray wrap
  • Antara silver wrap
  • Antara red wrap
  • Antara blue wrap
  • Antara green wrap
  • Antara yellow wrap
  • Antara orange wrap
  • Antara purple wrap
  • Antara pink wrap
  • Antara teal wrap
  • Antara brown wrap
  • Antara gold wrap
  • Antara chrome wrap
  • Antara color shift wrap
  • Antara carbon fiber wrap
  • Antara camo and patterned wrap

How much vinyl to wrap an Opel Antara

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2015SUV (5 doors)180.1 in (4,575 mm) to 180.9 in (4,596 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)

Antara wrap cost factors

Antara wrap cost depends on the amount of film, the labor of cut-outs, and the prep work for this SUV. The figure of about 62 ft (19 m) or 77 ft (23.5 m) of film is a starting point, but roof rails and moldings add time. Cut-outs for tailgate glass, fog lamps, and parking sensors also affect the cost.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (69.3 in (1,761 mm)): the roof is wrapped from a platform.
  • Restyled in 2010: bumpers and lights differ between the versions, and so do the film cuts.

Antara wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Antara, first generation, factory photo
Factory color shown

2006–2015 Antara SUV (first generation)

2006–2015SUV (5 doors)180.1 in (4,575 mm) to 180.9 in (4,596 mm)

The first generation of the Opel Antara was produced from 2006 to 2015 as a five-door SUV. A restyling in 2010 changed the bumpers and lights, so film cut for one version does not fit the other. The body length ranges from 180.1 in (4,575 mm) to 180.9 in (4,596 mm). A full wrap of this body requires about 62 ft (19 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (69.3 in (1,761 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on an Antara

Antara chrome delete covers the window trim, decorative moldings, and badges with black film. A partial wrap can also cover the roof, hood, or mirror caps. Paint protection film (PPF) is a clear film applied to the front end of the Opel Antara. These jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Opel Antara: body, cut-outs and film

The Opel Antara vinyl wrap follows the body of a five-door SUV. Its length ranges from 180.1 in (4,575 mm) to 180.9 in (4,596 mm), so a full wrap uses a single roll of cast film. The roof is high, at 69.3 in (1,761 mm), and wrapping it safely requires a platform. The large, flat body panels suit a clean color change wrap.

Antara wrap ideas must account for the tailgate with the rear glass in it, where the film ends at the edge of the glass. Some trims have roof rails that come off before the roof is wrapped, or the film is cut along them. Bright decorative moldings on some trims stay bright next to the film unless a chrome delete covers them. Parking sensors in the bumpers of some trims need a cut-out around each sensor, and every trim has fog lamps in the front bumper that require cut-outs in the bumper film.

How much vinyl to wrap an Antara depends on the version, because the body was restyled in 2010. The bumpers and lights changed, so film cut for one version does not fit the other. The overall length changed slightly, from 180.1 in (4,575 mm) to 180.9 in (4,596 mm). Because the catalog has one generation, a shop cuts the film to the specific version.

Questions about wrapping an Opel Antara

How much vinyl does it take to wrap an Opel Antara?

A full wrap of an Opel Antara takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. If the film is chrome or patterned, the amount rises to about 77 ft (23.5 m). The exact amount depends on the version and the installer's cutting method.

Which years of the Antara take the same film cuts?

The Opel Antara was produced from 2006 to 2015, but the 2010 restyling changed the bumpers and lights. Therefore, film cuts made for a 2006 to 2009 Antara do not fit a 2010 to 2015 Antara, and vice versa.

Can I wrap only the hood or the roof of an Antara?

Yes, you can wrap only the hood or the roof of an Antara as a partial wrap. Other partial options include the mirror caps, a chrome delete on the window trim and badges, or clear paint protection film on the front end.

Is an Antara hard to wrap?

Wrapping an Antara adds work because of its tall body, at 69.3 in (1,761 mm), which requires a platform for the roof. Cut-outs are needed around the tailgate glass, fog lamps, and any parking sensors. Roof rails and bright moldings on some trims must be removed or cut around.