Meriva wrap cost depends on the size of the car, the film chosen, and the work on the sliding doors and sensors. The second generation is 168.8 in (4,288 mm) long and takes about 64 ft (19.5 m) of film, while the first generation is shorter and takes about 59 ft (18 m). Chrome or patterned film adds about 8 ft (2.5 m) to the estimate on the second generation and 10 ft (3 m) on the first. Cut-outs for parking sensors, cameras and fog lamps, plus the sliding door tracks, add labor to the job.

2009–2017 Meriva van (second generation)
On the second-generation Opel Meriva (2009–2017), the sliding side doors are the main detail that decides where the film is cut. The tracks stay bare so the doors can slide, and the film is trimmed along the edge of each track. The rest of the door skin is wrapped as one piece up to the track line. This cut is the same on the restyled 2014 body and on every trim of this generation.
Sliding side doors: the door tracks stay bare, and the film is cut along them.
Some trims have parking sensors in the bumpers: the film is cut around each sensor.
Some trims have cameras in the body: the film is cut around each lens.
Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
