Wraps by car

Opel Mokka wrap

The Opel Mokka wrap page covers the first and second generations of this SUV. The newest body from 2020 onwards needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full vinyl wrap. The earlier generation, sold from 2012 to 2020, takes a little more film.

2generations16.5 mof film for a full wrap

Opel Mokka, second generation, factory photo
Opel Mokka, second generation. Factory color shown.

Opel Mokka wrap colors and ideas

  • Mokka black wrap
  • Mokka white wrap
  • Mokka gray wrap
  • Mokka silver wrap
  • Mokka red wrap
  • Mokka blue wrap
  • Mokka green wrap
  • Mokka yellow wrap
  • Mokka orange wrap
  • Mokka purple wrap
  • Mokka pink wrap
  • Mokka teal wrap
  • Mokka brown wrap
  • Mokka gold wrap
  • Mokka chrome wrap
  • Mokka color shift wrap
  • Mokka carbon fiber wrap
  • Mokka camo and patterned wrap

How much vinyl to wrap an Opel Mokka

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)163.4 in (4,151 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
2012–2020SUV (5 doors)168.3 in (4,275 mm) to 168.4 in (4,278 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Mokka wrap cost factors

Mokka wrap cost depends on the size of the car and the film you choose. A full wrap of the second generation uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, while the first generation uses about 57 ft (17.5 m). Chrome or patterned film adds about 10 ft and more preparation time. The final cost also reflects work on the tailgate, sensors, cameras, and the charge port door on electric versions.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2024: bumpers and lights differ between the versions, and so do the film cuts.

Mokka wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Mokka, second generation, factory photo
Factory color shown

2020–now Mokka SUV (second generation)

2020–nowSUV (5 doors)163.4 in (4,151 mm)

The second generation Opel Mokka was restyled in 2024, so the bumpers and lights changed from the earlier version. A film kit cut for a 2020 to 2023 Mokka does not fit a 2024 or newer car. When you count film for a wrap, know that the restyled body has different panel shapes, but the overall length stays 163.4 in (4,151 mm).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Opel Mokka, first generation, factory photo
Factory color shown

2012–2020 Mokka SUV (first generation)

2012–2020SUV (5 doors)168.3 in (4,275 mm) to 168.4 in (4,278 mm)

On the first generation Opel Mokka, paint age matters before a full wrap. These cars are from 2012 to 2020, so panels may be original or repainted. A test spot on each panel shows whether the paint is strong enough for the film. The wrap then uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Mokka

A partial wrap on an Opel Mokka covers the roof, hood, or mirror caps. A Mokka chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less film than a full wrap, often from 5 to 15 ft (1.5 to 4.5 m).

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Opel Mokka: body, cut-outs and film

An Opel Mokka vinyl wrap follows the body style of the SUV with five doors and a tailgate. The newest generation is 163.4 in (4,151 mm) long, so a full wrap uses about 54 ft (16.5 m) of film. The first generation is 168.3 in (4,275 mm) to 168.4 in (4,278 mm) long and needs about 57 ft (17.5 m). These sizes mean every panel is reachable without removing large body parts.

Mokka wrap ideas start with the tailgate, where the film ends at the edge of the rear glass. Some trims have parking sensors in the bumpers, and the film is cut around each sensor. Some trims have cameras in the body, and the installer cuts the film around each lens. Plug-in and electric versions of the newest Mokka have a charge port door, which is wrapped as a small piece of its own.

How much vinyl to wrap a Mokka depends on the generation. The first generation takes about 57 ft (17.5 m) because it is 168.3 in (4,275 mm) to 168.4 in (4,278 mm) long. The second generation is shorter at 163.4 in (4,151 mm) and takes about 54 ft (16.5 m). Both estimates are for 60-inch (1.52 m) cast film, and chrome or patterned film needs about 10 ft more.

Questions about wrapping an Opel Mokka

How much vinyl does it take to wrap an Opel Mokka?

A full wrap of an Opel Mokka takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. That figure is for the second generation from 2020 onwards. The first generation from 2012 to 2020 takes about 57 ft (17.5 m) of the same film.

Which years of the Mokka take the same film cuts?

Within the second generation, the Mokka had a restyling in 2024, so the years 2020 to 2023 and 2024 to now take different film cuts. The first generation had a restyling in 2016, so the years 2012 to 2015 and 2016 to 2020 also take different cuts.

Can I wrap only the hood or the roof of a Mokka?

Yes, you can wrap only the hood or the roof of a Mokka. A partial wrap covers the roof, hood, or mirror caps. A chrome delete covers the window trim and badges. Paint protection film (PPF) is a clear film for the front end.

Is a Mokka hard to wrap?

A Mokka is not especially hard to wrap, but some details add work. The tailgate has the rear glass in it, so the film must end at the edge of the glass. Some trims have parking sensors and cameras, which need cut-outs. The charge port door on electric versions is wrapped as a separate piece.