Wraps by car

Opel Insignia wrap

The Opel Insignia wrap guide covers both generations of this mid-size car, from 2008 to the present. A full vinyl wrap of the newest liftback takes about 57 ft (17.5 m) of 60-inch (1.52 m) film. The wagon body needs up to 69 ft (21 m) of the same film.

2generations17.5 mof film for a full wrap

Opel Insignia, second generation, factory photo
Opel Insignia, second generation. Factory color shown.

Opel Insignia wrap colors and ideas

  • Insignia black wrap
  • Insignia white wrap
  • Insignia gray wrap
  • Insignia silver wrap
  • Insignia red wrap
  • Insignia blue wrap
  • Insignia green wrap
  • Insignia yellow wrap
  • Insignia orange wrap
  • Insignia purple wrap
  • Insignia pink wrap
  • Insignia teal wrap
  • Insignia brown wrap
  • Insignia gold wrap
  • Insignia chrome wrap
  • Insignia color shift wrap
  • Insignia carbon fiber wrap
  • Insignia camo and patterned wrap

How much vinyl to wrap an Opel Insignia

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowliftback, wagon (5 doors)192.8 in (4,897 mm) to 197.0 in (5,004 mm)about 57 ft (17.5 m) for the liftback to 69 ft (21 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m)
2008–2017liftback, sedan, wagon (4 or 5 doors)190.2 in (4,830 mm) to 193.4 in (4,913 mm)about 59 ft (18 m) for the sedan to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)

Insignia wrap cost factors

Insignia wrap cost depends on the body style, the chosen film, and the amount of prep work. A wagon needs about 69 ft (21 m) of film, while a liftback needs about 57 ft (17.5 m). Chrome or patterned film adds up to about 77 ft (23.5 m) on the newest body.

  • Film for a full wrap: about 57 ft (17.5 m) for the liftback to 69 ft (21 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).
  • Body: liftback, wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2020: bumpers and lights differ between the versions, and so do the film cuts.

Insignia wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Insignia, second generation, factory photo
Factory color shown

2017–now Insignia liftback, wagon (second generation)

2017–nowliftback, wagon (5 doors)192.8 in (4,897 mm) to 197.0 in (5,004 mm)

The second generation Opel Insignia was restyled in 2020 with new bumpers and lights. Film cut for a pre-2020 bumper will not fit a post-2020 bumper. Installers check the production year before cutting the bumper film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 57 ft (17.5 m) for the liftback to 69 ft (21 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).

Opel Insignia, first generation, factory photo
Factory color shown

2008–2017 Insignia liftback, sedan, wagon (first generation)

2008–2017liftback, sedan, wagon (4 or 5 doors)190.2 in (4,830 mm) to 193.4 in (4,913 mm)

The first generation Opel Insignia ran from 2008 to 2017, so paint age varies widely on these cars. Panels may be original or repainted, and a repainted panel may not hold film the same way. A test spot on the paint comes before a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) for the sedan to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Roof, hood, chrome delete and PPF on an Insignia

A partial wrap on an Opel Insignia covers the roof, hood, or mirror caps. Insignia chrome delete covers window trim and badges with black film. Paint protection film (PPF) goes on the front end as a clear film.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Opel Insignia: body, cut-outs and film

The Opel Insignia vinyl wrap starts with body styles that range from a liftback to a wagon across two generations. The current liftback measures 192.8 in (4,897 mm) to 197.0 in (5,004 mm) long, while the older sedan is 190.2 in (4,830 mm) to 193.4 in (4,913 mm). These lengths and the tailgate design set how much film each panel needs.

Insignia wrap ideas include working around a tailgate that holds the rear glass, so the film ends at the edge of the glass. Some trims have parking sensors in the bumpers, and the film is cut around each sensor. Every trim has fog lamps in the front bumper, which require cut-outs in the bumper film.

How much vinyl to wrap an Insignia changes between the first and second generations. The first generation sedan needs about 59 ft (18 m) of film, while the second generation liftback needs about 57 ft (17.5 m). The wagon is the largest body in either generation, taking up to 69 ft (21 m).

Questions about wrapping an Opel Insignia

How much vinyl does it take to wrap an Opel Insignia?

A full wrap of the newest Opel Insignia takes about 57 ft (17.5 m) of film for the liftback and up to 69 ft (21 m) for the wagon.

Which years of the Insignia take the same film cuts?

The first generation (2008–2017) and the second generation (2017–now) each have their own film cuts. Within the first generation, the 2013 restyling changed bumpers and lights, so cuts differ before and after 2013. Within the second generation, the 2020 restyling changed bumpers and lights, so cuts differ before and after 2020.

Which Insignia body takes more film?

The wagon body of the Opel Insignia takes more film than the liftback or sedan. A second generation wagon needs about 69 ft (21 m), while a liftback needs about 57 ft (17.5 m).

Can I wrap only the hood or the roof of an Insignia?

Yes, you can wrap only the hood or the roof of an Opel Insignia. A partial wrap covers the roof, hood, or mirror caps. A chrome delete covers window trim and badges, and PPF covers the front end.