Wraps by car

Opel Meriva OPC wrap

The Opel Meriva OPC wrap page covers this single-generation minivan and the vinyl wrap a full body takes. The catalog includes one generation of the Meriva OPC, the second generation built from 2006 to 2010. A full wrap of the newest body uses about 59 ft (18 m) of 60-inch (1.52 m) cast film.

1generations18 mof film for a full wrap

Opel Meriva OPC, second generation, factory photo
Opel Meriva OPC, second generation. Factory color shown.

Opel Meriva OPC wrap colors and ideas

  • Meriva OPC black wrap
  • Meriva OPC white wrap
  • Meriva OPC gray wrap
  • Meriva OPC silver wrap
  • Meriva OPC red wrap
  • Meriva OPC blue wrap
  • Meriva OPC green wrap
  • Meriva OPC yellow wrap
  • Meriva OPC orange wrap
  • Meriva OPC purple wrap
  • Meriva OPC pink wrap
  • Meriva OPC teal wrap
  • Meriva OPC brown wrap
  • Meriva OPC gold wrap
  • Meriva OPC chrome wrap
  • Meriva OPC color shift wrap
  • Meriva OPC carbon fiber wrap
  • Meriva OPC camo and patterned wrap

How much vinyl to wrap an Opel Meriva OPC

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2010van (5 doors)159.5 in (4,052 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Meriva OPC wrap cost factors

Meriva OPC wrap cost depends on the size of this minivan and the film area of about 59 ft (18 m) for a full wrap. The cost also changes with film type: cast film is the base, while chrome or patterned film needs about 69 ft (21 m). Cut-outs for the fog lamps on every trim add labor to the job.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2006: bumpers and lights differ between the versions, and so do the film cuts.

Meriva OPC wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Meriva OPC, second generation, factory photo
Factory color shown

2006–2010 Meriva OPC van (second generation)

2006–2010van (5 doors)159.5 in (4,052 mm)

The second generation Opel Meriva OPC built from 2006 to 2010 has sliding side doors that set the wrap layout. The tracks stay bare and decide where the film is cut along each door. This generation was restyled in 2006, so all years in the catalog share the same door parts and film cuts.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Meriva OPC

A partial wrap on the Opel Meriva OPC can cover the roof, hood, or mirror caps on their own. A chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Opel Meriva OPC: body, cut-outs and film

An Opel Meriva OPC vinyl wrap has to follow the shape of a five-door van that is 159.5 in (4,052 mm) long. The tall sides and flat roof make large panels simple, but the sliding side doors need careful film cutting along their tracks. The bumper with fog lamps on every trim adds a small cut-out to the wrap.

Meriva OPC wrap ideas start with the sliding side doors, where the door tracks stay bare and the film is cut along them. The front bumper needs cut-outs for the fog lamps fitted on every trim of this car. The door handles and mirrors are also removed or trimmed around for a clean install.

To work out how much vinyl to wrap a Meriva OPC, count the film for the one generation offered in the catalog. The body length of 159.5 in (4,052 mm) sets the scale for the side panels and the roof. A full wrap of the second generation needs about 59 ft (18 m) of 60-inch (1.52 m) cast film.

Questions about wrapping an Opel Meriva OPC

How much vinyl does it take to wrap an Opel Meriva OPC?

About 59 ft (18 m) of 60-inch (1.52 m) cast film wraps an Opel Meriva OPC fully. This estimate is for the newest body, the second generation from 2006 to 2010. Extra material is needed for chrome or patterned film, which takes about 69 ft (21 m).

Are the sliding doors of a Meriva OPC wrapped?

Yes, the sliding doors of the Meriva OPC are wrapped, but the tracks stay bare. The film is cut along the door tracks so the door can slide without touching the vinyl.

Which years of the Meriva OPC take the same film cuts?

All years of the Meriva OPC in the catalog, 2006 to 2010, take the same film cuts. This single generation was restyled in 2006, and later years kept the same sliding door and bumper shape.

Can I wrap only the hood or the roof of a Meriva OPC?

Yes, you can wrap only the hood or the roof of a Meriva OPC. A partial wrap can also cover the mirror caps, or you can choose a chrome delete for the window trim and badges.