Wraps by car

Opel Ampera wrap

The Opel Ampera wrap page covers two generations of this subcompact electric hatchback. A full wrap of the newest body uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl wrap. The first generation takes roughly 52 ft (16 m) of the same film width.

2generations16.5 mof film for a full wrap

Opel Ampera, second generation, factory photo
Opel Ampera, second generation. Factory color shown.

Opel Ampera wrap colors and ideas

  • Ampera black wrap
  • Ampera white wrap
  • Ampera gray wrap
  • Ampera silver wrap
  • Ampera red wrap
  • Ampera blue wrap
  • Ampera green wrap
  • Ampera yellow wrap
  • Ampera orange wrap
  • Ampera purple wrap
  • Ampera pink wrap
  • Ampera teal wrap
  • Ampera brown wrap
  • Ampera gold wrap
  • Ampera chrome wrap
  • Ampera color shift wrap
  • Ampera carbon fiber wrap
  • Ampera camo and patterned wrap

How much vinyl to wrap an Opel Ampera

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–2019hatchback (5 doors)164.0 in (4,166 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
2011–2016hatchback (5 doors)177.1 in (4,498 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Ampera wrap cost factors

Ampera wrap cost depends on the generation, film type, and the amount of disassembly. The second generation uses about 54 ft (16.5 m) of 60-inch film, so film quantity is a key factor. The first generation uses about 52 ft (16 m), but its longer body may need more labor time. A partial wrap or chrome delete will need less film than a full color change wrap.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Ampera wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Ampera, second generation, factory photo
Factory color shown

2016–2019 Ampera hatchback (second generation)

2016–2019hatchback (5 doors)164.0 in (4,166 mm)

The second-generation Ampera is a subcompact hatchback that measures 164.0 in (4,166 mm) long. Its smaller size means a full wrap uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The five-door body has more panel edges than a three-door, but the panels are modest in size. A wrap on this body balances film use with the number of cut lines.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Opel Ampera, first generation, factory photo
Factory color shown

2011–2016 Ampera hatchback (first generation)

2011–2016hatchback (5 doors)177.1 in (4,498 mm)

The first-generation Ampera was produced from 2011 to 2016, so paint age varies on every car. Some panels may be original, while others could have been repainted, and a test spot on each panel comes before a full wrap. A vinyl wrap can lift weak or failing paint, so adhesion testing is part of prep. Check rock chips and clear coat condition before you commit to film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on an Ampera

A partial wrap on an Opel Ampera can cover the roof, hood, or mirror caps as separate jobs. An Ampera chrome delete wraps the window trim and badges in black film for a different look. Paint protection film (PPF) is a clear option applied to the front end of the car. These smaller jobs use less film and take less time than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Opel Ampera: body, cut-outs and film

An Opel Ampera vinyl wrap follows the five-door hatchback body and its compact dimensions. The second generation is 164.0 in (4,166 mm) long, so film use stays moderate. The first generation is longer at 177.1 in (4,498 mm), adding slightly more surface area. Both bodies have a tailgate where the film ends at the edge of the rear glass.

Ampera wrap ideas include covering the tailgate up to the glass edge and handling the charge port door separately. The electric car's charge port door is best wrapped as a small piece of its own on the second generation. The rear glass sits inside the tailgate, so the film does not continue onto the glass. Removing badges or door handles can make the install cleaner.

To know how much vinyl to wrap an Ampera, compare the two generations in the catalog. The newer car needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, while the older one calls for about 52 ft (16 m). If you choose chrome or patterned film, add roughly 8 ft (2.5 m) on the second generation and 15 ft (4.5 m) on the first. These extra lengths allow pattern matching and coverage of bright trim.

Questions about wrapping an Opel Ampera

How much vinyl does it take to wrap an Opel Ampera?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) vinyl to wrap the newest Opel Ampera. That estimate is for the second generation body, a subcompact hatchback. The first generation takes about 52 ft (16 m) of the same width. Add extra film if you choose chrome or patterned vinyl.

Can I wrap only the hood or the roof of an Ampera?

Yes, the Ampera can be wrapped partially, with the hood and roof as common single-panel jobs. The partial wrap options from the catalog are roof, hood, and mirror caps. You can also do a chrome delete on the window trim and badges. PPF on the front end is another partial option.

Is an Ampera hard to wrap?

An Ampera is not hard to wrap, but a couple of details add work. The tailgate has the rear glass in it, so the film ends at the edge of the glass. On the second generation, the charge port door is wrapped as a small piece of its own. The compact size keeps panel sizes manageable.

How many generations of the Ampera does this page cover?

This page covers two generations of the Opel Ampera. The first generation ran from 2011 to 2016, and the second from 2016 to 2019. Both are five-door hatchbacks, but the first is longer at 177.1 in (4,498 mm). The second measures 164.0 in (4,166 mm) and uses slightly more film.