Wraps by car

Opel Calibra wrap

The Opel Calibra wrap page covers the first generation coupe from 1990 to 1997. This catalog lists one generation of the Calibra. A full wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl wrap.

1generations15 mof film for a full wrap

Opel Calibra, first generation, factory photo
Opel Calibra, first generation. Factory color shown.

Opel Calibra wrap colors and ideas

  • Calibra black wrap
  • Calibra white wrap
  • Calibra gray wrap
  • Calibra silver wrap
  • Calibra red wrap
  • Calibra blue wrap
  • Calibra green wrap
  • Calibra yellow wrap
  • Calibra orange wrap
  • Calibra purple wrap
  • Calibra pink wrap
  • Calibra teal wrap
  • Calibra brown wrap
  • Calibra gold wrap
  • Calibra chrome wrap
  • Calibra color shift wrap
  • Calibra carbon fiber wrap
  • Calibra camo and patterned wrap

How much vinyl to wrap an Opel Calibra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1990–1997coupe (2 doors)176.9 in (4,492 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Calibra wrap cost factors

Calibra wrap cost is driven by the size of the coupe body and the labor for its long doors. The car needs about 49 ft (15 m) of 60-inch (1.52 m) film for a full color change. Fewer panels and seams due to large doors can keep installation time steady. Film choice, surface preparation, and any paint repairs also influence the final cost.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Calibra wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Calibra, first generation, factory photo
Factory color shown

1990–1997 Calibra coupe (first generation)

1990–1997coupe (2 doors)176.9 in (4,492 mm)

The first generation Calibra from 1990 to 1997 is a compact coupe with a length of 176.9 in (4,492 mm). Its two long side doors each take one large piece of wrap film. Before a full wrap, a test spot is wise because panels may be original or repainted.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Calibra

A partial wrap on the Calibra covers the roof, hood, or mirror caps with vinyl. Calibra chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Opel Calibra: body, cut-outs and film

The Opel Calibra vinyl wrap is favored by its coupe body style with two long side doors. Each door is one large piece of film, which simplifies panel coverage. The car is 176.9 in (4,492 mm) long, a compact size that reduces film waste.

Calibra wrap ideas begin with the two long side doors, since each door needs one large piece of film. Installers cut out the door handles, mirrors, and badges. The window trim and badges can be covered with black film for a chrome delete.

How much vinyl to wrap a Calibra depends on the single generation from 1990 to 1997. The coupe body has no major size changes across these years. Panel condition, especially repainted areas, can affect film usage and preparation.

Questions about wrapping an Opel Calibra

How much vinyl does it take to wrap an Opel Calibra?

You need about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl to wrap an Opel Calibra. This figure covers the entire coupe body of the first generation.

Can I wrap only the hood or the roof of a Calibra?

Yes, you can wrap only the hood or the roof of a Calibra. Other partial wrap options include mirror caps, a chrome delete for window trim and badges, and clear paint protection film on the front end.

Is a Calibra hard to wrap?

Yes, a Calibra is somewhat hard to wrap because each long side door needs one large piece of film. Handling a large piece requires care to avoid wrinkles and ensure proper alignment.

How many generations of the Calibra does this page cover?

This page covers one generation of the Calibra, produced from 1990 to 1997.