Wraps by car

Opel Commodore wrap

The Opel Commodore wrap guide covers all three generations and the vinyl wrap film each body needs. The third generation spans the years 1978 to 1982, while the first and second generations cover 1967 to 1978. A full wrap of the newest sedan takes about 52 ft (16 m) of 60-inch (1.52 m) cast film.

3generations16 mof film for a full wrap

Opel Commodore, third generation, factory photo
Opel Commodore, third generation. Factory color shown.

Opel Commodore wrap colors and ideas

  • Commodore black wrap
  • Commodore white wrap
  • Commodore gray wrap
  • Commodore silver wrap
  • Commodore red wrap
  • Commodore blue wrap
  • Commodore green wrap
  • Commodore yellow wrap
  • Commodore orange wrap
  • Commodore purple wrap
  • Commodore pink wrap
  • Commodore teal wrap
  • Commodore brown wrap
  • Commodore gold wrap
  • Commodore chrome wrap
  • Commodore color shift wrap
  • Commodore carbon fiber wrap
  • Commodore camo and patterned wrap

How much vinyl to wrap an Opel Commodore

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1978–1982sedan, wagon (4 or 5 doors)185.0 in (4,700 mm) to 185.9 in (4,722 mm)about 52 ft (16 m) for the sedan to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)
1972–1978coupe, sedan (2 or 4 doors)180.1 in (4,574 mm)about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)
1967–1971coupe, sedan (2 or 4 doors)180.1 in (4,574 mm)about 49 ft (15 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Commodore wrap cost factors

Commodore wrap cost depends on the size of the car, the film type and the number of cut-outs. A third generation sedan is 185.0 in (4,700 mm) long, while the wagon reaches 185.9 in (4,722 mm), so the wagon uses more film. Chrome or patterned film needs up to about 72 ft (22 m) on the newest sedan, compared to about 52 ft (16 m) for solid cast film. The shop also charges for removing trim pieces and for the time spent on the tailgate glass edge on the wagon.

  • Film for a full wrap: about 52 ft (16 m) for the sedan to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Commodore wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Commodore, third generation, factory photo
Factory color shown

1978–1982 Commodore sedan, wagon (third generation)

1978–1982sedan, wagon (4 or 5 doors)185.0 in (4,700 mm) to 185.9 in (4,722 mm)

The third generation Opel Commodore offers a sedan and a wagon, and the body style decides the panel plan and the film amount. The sedan measures 185.0 in (4,700 mm) long and uses about 52 ft (16 m) of 60-inch cast film. The wagon is 185.9 in (4,722 mm) long and needs about 56 ft (17 m) because of the large tailgate and roof. Both bodies have four doors in the wagon and four in the sedan, so the door count is the same.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the sedan to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Opel Commodore, second generation, factory photo
Factory color shown

1972–1978 Commodore coupe, sedan (second generation)

1972–1978coupe, sedan (2 or 4 doors)180.1 in (4,574 mm)

Paint age matters on a second generation Opel Commodore from 1972 to 1978, because panels may be original or repainted. A test spot is applied before a full wrap to check that the film adheres to the old paint. If the paint is flaking, the film will peel off with the paint. The body is 180.1 in (4,574 mm) long, and the coupe uses less film than the sedan.

Film: about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Opel Commodore, first generation, factory photo
Factory color shown

1967–1971 Commodore coupe, sedan (first generation)

1967–1971coupe, sedan (2 or 4 doors)180.1 in (4,574 mm)

The first generation Opel Commodore is 180.1 in (4,574 mm) long, and the body style sets the film amount and panel count. The coupe needs about 49 ft (15 m) of 60-inch (1.52 m) cast film, and the sedan needs about 56 ft (17 m). The sedan has two extra doors, which adds four separate panels and about 7 ft (2 m) of film. An installer cuts film for the roof, hood, doors, fenders and trunk separately.

Film: about 49 ft (15 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Commodore

A partial wrap on an Opel Commodore can cover the roof, hood or mirror caps alone instead of the whole body. Commodore chrome delete covers the window trim and the badges with black film, which is a smaller job than a full color change wrap. Paint protection film (PPF) is clear film applied to the front end of the car to protect the paint from stone chips. These partial jobs use less film and often leave the doors and the tailgate untouched.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Opel Commodore: body, cut-outs and film

An Opel Commodore vinyl wrap follows the body style, because the sedan and wagon present different panel shapes and total area. The third generation is a mid-size car with a length from 185.0 in (4,700 mm) to 185.9 in (4,722 mm), so each panel is manageable for one installer. The wagon adds a tall tailgate and longer roof rails, which increases the number of pieces and the amount of film. A sedan has four doors on the newest body, and every door needs its own section of vinyl.

Commodore wrap ideas start with the details that require cut-outs or temporary removal. On the third generation wagon, the tailgate has the rear glass in it, so the film ends at the edge of the glass. Door handles, mirrors and antennas come off for a clean color change wrap. Badges and trim strips are removed for chrome delete, then reinstalled or replaced.

How much vinyl to wrap a Commodore depends on the generation and the body style. The first generation sedan uses about 56 ft (17 m) of 60-inch (1.52 m) cast film, while the coupe uses about 49 ft (15 m). The third generation wagon needs roughly 56 ft (17 m) and the sedan about 52 ft (16 m). An installer counts the roof, hood, doors and fenders, then adds extra for wrapping edges and mistakes.

Questions about wrapping an Opel Commodore

How much vinyl does it take to wrap an Opel Commodore?

An Opel Commodore needs about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full wrap of the newest sedan. The wagon needs about 56 ft (17 m) because it has a longer roof and a large tailgate. These figures cover a solid color change wrap with some extra for trimming the edges. Chrome or patterned film can use up to about 72 ft (22 m) on the same car.

Which Commodore body takes more film?

The Commodore wagon takes more film than the sedan, about 56 ft (17 m) against 52 ft (16 m) for the third generation. The wagon has a longer body, a taller tailgate and a longer roof, so the film pieces are larger. The sedan has a shorter roof and a trunk lid instead of a tailgate. In the first generation, the sedan also takes more than the coupe because of the extra doors.

Can I wrap only the hood or the roof of a Commodore?

Yes, you can wrap only the hood or the roof of a Commodore as a partial wrap. A partial wrap may also include the mirror caps, which are small and quick to cover. The roof piece follows the shape of the roof and the drip rails. A hood wrap is a single large piece on most Commodores.

Is a Commodore hard to wrap?

A Commodore is not hard to wrap for an installer who knows the body, but the wagon tailgate with glass in it adds work. The film has to end at the edge of the glass, so the cut must be precise. The car is mid-size, with a length around 185 in (4,700 mm), so each panel is still a one-person job. Door handles and trim pieces have to come off for a clean finish.