Wraps by car

Opel Kapitan wrap

The Opel Kapitan wrap page covers six generations of this large sedan, from 1953 to 1970. A full vinyl wrap of the newest body, the 1969–1970 sedan, takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 69 ft (21 m). Plain cast film is the standard choice for a smooth color change.

6generations18.5 mof film for a full wrap

Opel Kapitan, sixth generation, factory photo
Opel Kapitan, sixth generation. Factory color shown.

Opel Kapitan wrap colors and ideas

  • Kapitan black wrap
  • Kapitan white wrap
  • Kapitan gray wrap
  • Kapitan silver wrap
  • Kapitan red wrap
  • Kapitan blue wrap
  • Kapitan green wrap
  • Kapitan yellow wrap
  • Kapitan orange wrap
  • Kapitan purple wrap
  • Kapitan pink wrap
  • Kapitan teal wrap
  • Kapitan brown wrap
  • Kapitan gold wrap
  • Kapitan chrome wrap
  • Kapitan color shift wrap
  • Kapitan carbon fiber wrap
  • Kapitan camo and patterned wrap

How much vinyl to wrap an Opel Kapitan

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1969–1970sedan (4 doors)193.2 in (4,907 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
1964–1968sedan (4 doors)194.8 in (4,948 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1959–1963sedan (4 doors)190.2 in (4,831 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
1958–1959sedan (4 doors)187.6 in (4,764 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1953–1958sedan (4 doors)185.4 in (4,710 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1938–1953convertible, sedan (2 or 4 doors)181.9 in (4,620 mm) to 185.6 in (4,715 mm)about 56 ft (17 m) for the convertible to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

Kapitan wrap cost factors

Kapitan wrap cost depends on the size of the car, the amount of film, and the labor for its long flat panels and many trim pieces. A full wrap uses at least 57 ft (17.5 m) of 60-inch (1.52 m) film for the second generation, and up to 61 ft (18.5 m) for the sixth generation. The number of cut-outs for chrome and badges also changes the time needed. On a classic sedan of this age, surface preparation can be more involved if the paint is old or uneven.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).

Kapitan wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Kapitan, sixth generation, factory photo
Factory color shown

1969–1970 Kapitan sedan (sixth generation)

1969–1970sedan (4 doors)193.2 in (4,907 mm)

The sixth generation Opel Kapitan, built for 1969–1970, is 193.2 in (4,907 mm) long as a four-door sedan. Its large flat roof and long body panels call for 61 ft (18.5 m) of 60-inch (1.52 m) cast film, or about 69 ft (21 m) with chrome or patterned film. Paint age matters on a car of these years: panels may be original or repainted, so a test spot comes before a full wrap.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Opel Kapitan, fifth generation, factory photo
Factory color shown

1964–1968 Kapitan sedan (fifth generation)

1964–1968sedan (4 doors)194.8 in (4,948 mm)

The fifth generation Opel Kapitan, from 1964–1968, measures 194.8 in (4,948 mm) in four-door sedan form. This is the longest Kapitan body, so a full wrap uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, or about 70 ft (21.5 m) for chrome or patterned film. The four doors and large quarter panels mean more seams and careful trimming around the bright trim.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Opel Kapitan, fourth generation, factory photo
Factory color shown

1959–1963 Kapitan sedan (fourth generation)

1959–1963sedan (4 doors)190.2 in (4,831 mm)

The fourth generation Opel Kapitan, produced 1959–1963, is 190.2 in (4,831 mm) long as a four-door sedan. A full wrap takes about 59 ft (18 m) of 60-inch (1.52 m) cast film, or about 69 ft (21 m) with chrome or patterned film. Its size and four-door layout create many medium-sized panels, so a single installer often works on one side at a time.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Opel Kapitan, third generation, factory photo
Factory color shown

1958–1959 Kapitan sedan (third generation)

1958–1959sedan (4 doors)187.6 in (4,764 mm)

The third generation Opel Kapitan, built 1958–1959, is a four-door sedan 187.6 in (4,764 mm) long. Wrapping it takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, or about 67 ft (20.5 m) with chrome or patterned film. The body is slightly narrower, but the four doors and long roof still require careful film alignment across the panels.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Opel Kapitan, second generation, factory photo
Factory color shown

1953–1958 Kapitan sedan (second generation)

1953–1958sedan (4 doors)185.4 in (4,710 mm)

The second generation Opel Kapitan, made from 1953–1958, is 185.4 in (4,710 mm) long as a four-door sedan. A full wrap of this generation needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, or about 67 ft (20.5 m) for chrome or patterned film. It has the smallest body of the covered generations, but the number of panels is the same, so the labor is similar.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Opel Kapitan, first generation, factory photo
Factory color shown

1938–1953 Kapitan convertible, sedan (first generation)

1938–1953convertible, sedan (2 or 4 doors)181.9 in (4,620 mm) to 185.6 in (4,715 mm)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 56 ft (17 m) for the convertible to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Kapitan

Partial wrap work on an Opel Kapitan can focus on the roof, hood, or mirror caps. A Kapitan chrome delete replaces the bright window trim and badges with black film, a job that calls for precise cutting around each small part. Paint protection film (PPF) on the front end covers the hood leading edge, fender tips, and sometimes the bumper. These smaller jobs use less film than a full color change wrap and can be done without wrapping the doors.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Opel Kapitan: body, cut-outs and film

An Opel Kapitan vinyl wrap on this four-door sedan means covering a body that is 193.2 in (4,907 mm) long on the 1969–1970 model. The earlier generations are slightly shorter, from 185.4 in (4,710 mm) up to 194.8 in (4,948 mm). All are four-door sedans with a large roof, four full doors, and long front fenders. That adds up to many separate panels, and each one must be wrapped cleanly around its edges.

Kapitan wrap ideas usually start with deciding how to treat the bright trim. The window surrounds and side moldings can be covered in black film for a chrome delete, but the film must be cut precisely around each piece. Door handles, mirrors, and badges should be removed for a clean wrap. On the 1969–1970 Kapitan, the front grille and bumpers are not wrapped, so the installer works around them.

If you want to know how much vinyl to wrap a Kapitan, the generation matters. The sixth generation, from 1969–1970, needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The 1959–1963 fourth generation needs about 59 ft (18 m), and the 1953–1958 second generation needs about 57 ft (17.5 m). Chrome or patterned film adds roughly 8 to 10 ft (2.5 to 3 m) because of pattern matching.

Questions about wrapping an Opel Kapitan

How much vinyl does it take to wrap an Opel Kapitan?

A full wrap of an Opel Kapitan takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film on the 1969–1970 body. That is the estimate for plain film; if you want chrome or patterned film, plan for about 69 ft (21 m). The exact amount depends on the installer's cutting and the number of panels left on the car.

Can I wrap only the hood or the roof of a Kapitan?

Yes, you can wrap only the hood or the roof of a Kapitan. The hood is a large flat panel that is a common partial wrap job, and the roof can be covered on its own. Mirror caps, chrome delete on window trim and badges, and paint protection film on the front end are other partial options.

Is a Kapitan hard to wrap?

A Kapitan is not the hardest classic car to wrap, but its size and bright trim add work. The 1969–1970 model is 193.2 in (4,907 mm) long, so each side has long panels that must be handled carefully. The window trim and side moldings require many cut-outs, and the paint on a car of this age may need extra preparation before film goes on.

How many generations of the Kapitan does this page cover?

This page covers six generations of the Opel Kapitan, from the second generation of 1953–1958 to the sixth generation of 1969–1970. The first generation is not included in this catalog. Each covered generation is a four-door sedan with its own film estimate.