Wraps by car

Opel Manta wrap

The Opel Manta wrap page covers the first and second generations of this sports car. A full wrap of the newest body takes about 48 ft (14.5 m) to 51 ft (15.5 m) of 60-inch (1.52 m) cast vinyl wrap. The first generation needs about 46 ft (14 m), while chrome or patterned film adds roughly 6 ft (1.8 m) on either body.

2generations14.5 mof film for a full wrap

Opel Manta, second generation, factory photo
Opel Manta, second generation. Factory color shown.

Opel Manta wrap colors and ideas

  • Manta black wrap
  • Manta white wrap
  • Manta gray wrap
  • Manta silver wrap
  • Manta red wrap
  • Manta blue wrap
  • Manta green wrap
  • Manta yellow wrap
  • Manta orange wrap
  • Manta purple wrap
  • Manta pink wrap
  • Manta teal wrap
  • Manta brown wrap
  • Manta gold wrap
  • Manta chrome wrap
  • Manta color shift wrap
  • Manta carbon fiber wrap
  • Manta camo and patterned wrap

How much vinyl to wrap an Opel Manta

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1975–1988coupe, hatchback (2 or 3 doors)174.8 in (4,440 mm)about 48 ft (14.5 m) for the coupe to 51 ft (15.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)
1970–1975coupe (2 doors)171.0 in (4,343 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Manta wrap cost factors

Manta wrap cost depends on the film amount for your body style and the labor for its panels. The second generation hatchback takes more film than the coupe, so its cost is a bit higher. The first generation has two long side doors that are each one large piece, which adds time. Paint condition also matters, because older paint may need more preparation.

  • Film for a full wrap: about 48 ft (14.5 m) for the coupe to 51 ft (15.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).
  • Body: coupe, hatchback (2 or 3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Manta wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Manta, second generation, factory photo
Factory color shown

1975–1988 Manta coupe, hatchback (second generation)

1975–1988coupe, hatchback (2 or 3 doors)174.8 in (4,440 mm)

The second generation Opel Manta offers two body styles: coupe and hatchback. The coupe is a two-door shape, while the hatchback has three doors including the tailgate. The hatchback tailgate with its rear glass means the film must end at the edge of the glass. That detail can add time to the wrap installation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the coupe to 51 ft (15.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Opel Manta, first generation, factory photo
Factory color shown

1970–1975 Manta coupe (first generation)

1970–1975coupe (2 doors)171.0 in (4,343 mm)

The first generation Opel Manta is a two-door coupe from 1970 to 1975. On a car of these years, panels may be original or repainted. A test spot comes before a full wrap to check how the paint reacts. That step helps avoid lifting paint when the film is removed.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Manta

A partial wrap on an Opel Manta can cover the roof, hood, or mirror caps. Manta chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film for the front end. These jobs use less film than a full wrap and can change the look quickly.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Opel Manta: body, cut-outs and film

An Opel Manta vinyl wrap depends on the body style you have. The second generation came as a coupe or hatchback, with a length of 174.8 in (4,440 mm). The hatchback tailgate adds a large rear surface, so it takes more film than the coupe. The first generation is a two-door coupe at 171.0 in (4,343 mm), and its long side doors are each one large piece.

Manta wrap ideas should account for the tailgate with the rear glass on the second generation hatchback. The film ends at the edge of the glass, so the installer must trim carefully around it. On the first generation, the two long side doors are each one large piece of film. That means fewer seams on the doors but more care when stretching the film.

How much vinyl to wrap a Manta changes between the two generations. The first generation coupe uses about 46 ft (14 m) of 60-inch (1.52 m) film. The second generation coupe takes about 48 ft (14.5 m), and the hatchback about 51 ft (15.5 m). If you choose chrome or patterned film, order up to about 57 ft (17.5 m) for either generation.

Questions about wrapping an Opel Manta

How much vinyl does it take to wrap an Opel Manta?

Yes, an Opel Manta needs about 48 ft (14.5 m) of vinyl for the second generation coupe, or 51 ft (15.5 m) for the hatchback. The first generation coupe takes about 46 ft (14 m). These figures assume 60-inch (1.52 m) cast film. Chrome or patterned film can add up to about 57 ft (17.5 m).

Which Manta body takes more film?

The second generation hatchback takes more film than the coupe. Its estimate is about 51 ft (15.5 m), compared to 48 ft (14.5 m) for the coupe. The hatchback tailgate with the rear glass adds surface area. The first generation coupe takes the least at about 46 ft (14 m).

Can I wrap only the hood or the roof of a Manta?

Yes, you can wrap only the hood or the roof of a Manta as a partial wrap. Mirror caps are another small job. A chrome delete covers the window trim and badges. Clear paint protection film (PPF) can cover the front end.

Is a Manta hard to wrap?

Yes, a Manta has some parts that add work for a wrapper. The second generation hatchback has a tailgate with rear glass, so the film ends at the edge of the glass. The first generation has two long side doors, each one large piece of film. The car is a small sports car, so the total film amount is moderate.