Wraps by car

Opel Monza wrap

The Opel Monza wrap page covers the first generation of the Opel Monza, a mid-size hatchback produced from 1978 to 1986. A full color change wrap of the Monza takes about 52 ft (16 m) of 60-inch (1.52 m) cast vinyl wrap. The Monza has one generation in this catalog.

1generations16 mof film for a full wrap

Opel Monza, first generation, factory photo
Opel Monza, first generation. Factory color shown.

Opel Monza wrap colors and ideas

  • Monza black wrap
  • Monza white wrap
  • Monza gray wrap
  • Monza silver wrap
  • Monza red wrap
  • Monza blue wrap
  • Monza green wrap
  • Monza yellow wrap
  • Monza orange wrap
  • Monza purple wrap
  • Monza pink wrap
  • Monza teal wrap
  • Monza brown wrap
  • Monza gold wrap
  • Monza chrome wrap
  • Monza color shift wrap
  • Monza carbon fiber wrap
  • Monza camo and patterned wrap

How much vinyl to wrap an Opel Monza

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1978–1986hatchback (3 doors)185.8 in (4,720 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Monza wrap cost factors

The Monza wrap cost depends on the film length, the film type, and the condition of the paint. A full wrap of the Monza needs about 52 ft (16 m) of film, and a chrome or patterned film needs about 66 ft (20 m). The installer also checks the paint on every panel, since the car may have original or repainted panels. The cost therefore changes with the size of the job and the prep work needed.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Monza wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Monza, first generation, factory photo
Factory color shown

1978–1986 Monza hatchback (first generation)

1978–1986hatchback (3 doors)185.8 in (4,720 mm)

The first generation Opel Monza was built from 1978 to 1986 as a 3-door hatchback. On a car of these years, the paint may be original or repainted, so a test spot comes before a full wrap. The installer tests a small area of film on the paint to be sure it will stick well. The wrap then follows the shape of the hatchback body with its tailgate and long doors.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Monza

A partial wrap on the Monza can cover the roof, hood, and mirror caps. Monza chrome delete covers the window trim and badges with black film. Paint protection film (PPF) protects the front end with a clear film. These smaller jobs use less film than a full wrap and can be done on their own.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Opel Monza: body, cut-outs and film

The Opel Monza vinyl wrap is shaped by the body style and size. The Monza is a 3-door hatchback that is 185.8 in (4,720 mm) long. It has a tailgate with the rear glass in it, and two long side doors, each door taking one large piece of film. These features make the wrap a straightforward but careful job.

Monza wrap ideas include working around the tailgate and the side doors. The film ends at the edge of the rear glass on the tailgate, so the installer does not wrap the glass itself. Each of the two long side doors takes one large piece of film, which needs careful positioning. The body has no separate pieces that must be removed for a basic color change.

How much vinyl to wrap a Monza depends on the generation, but there is only one generation in this catalog. The first generation Monza from 1978 to 1986 is the only one covered. The film estimate for the full body is about 52 ft (16 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, the estimate goes up to about 66 ft (20 m).

Questions about wrapping an Opel Monza

How much vinyl does it take to wrap an Opel Monza?

Yes, it takes about 52 ft (16 m) of 60-inch (1.52 m) film to wrap an Opel Monza. That is the estimate for a full wrap of the first generation Monza with a standard cast film. If you use chrome or patterned film, the amount goes up to about 66 ft (20 m).

Can I wrap only the hood or the roof of a Monza?

Yes, you can wrap only the hood or the roof of a Monza. A partial wrap job on the Monza includes the roof, hood, and mirror caps as separate options. You could also choose a chrome delete for the window trim and badges, or paint protection film on the front end.

Is a Monza hard to wrap?

The Monza is not hard to wrap, but it does have some parts that add work. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Each of the two long side doors takes one large piece of film, which needs careful handling. The car is 185.8 in (4,720 mm) long, so a full wrap covers a large surface.

How many generations of the Monza does this page cover?

This page covers one generation of the Monza. The Opel Monza was built from 1978 to 1986 as a first generation model. There is only one generation in the catalog.