Wraps by car

Opel Olympia wrap

The Opel Olympia wrap page covers the vinyl wrap needs of the Opel Olympia across six generations. The newest body in the catalog is from 1967–1970. A full wrap of that body takes about 44 ft (13.5 m) for the coupe to 46 ft (14 m) for the sedan in 60-inch (1.52 m) cast film.

6generations14 mof film for a full wrap

Opel Olympia, sixth generation, factory photo
Opel Olympia, sixth generation. Factory color shown.

Opel Olympia wrap colors and ideas

  • Olympia black wrap
  • Olympia white wrap
  • Olympia gray wrap
  • Olympia silver wrap
  • Olympia red wrap
  • Olympia blue wrap
  • Olympia green wrap
  • Olympia yellow wrap
  • Olympia orange wrap
  • Olympia purple wrap
  • Olympia pink wrap
  • Olympia teal wrap
  • Olympia brown wrap
  • Olympia gold wrap
  • Olympia chrome wrap
  • Olympia color shift wrap
  • Olympia carbon fiber wrap
  • Olympia camo and patterned wrap

How much vinyl to wrap an Opel Olympia

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1967–1970coupe, sedan (2 or 4 doors)164.6 in (4,182 mm)about 44 ft (13.5 m) for the coupe to 46 ft (14 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)
1957–1963coupe, wagon (2 or 3 doors)164.6 in (4,182 mm) to 177.8 in (4,515 mm)about 44 ft (13.5 m) for the coupe to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)
1953–1957convertible, sedan, wagon (2 or 3 doors)——
1950–1953convertible, coupe, wagon (2 or 4 or 5 doors)158.3 in (4,020 mm)about 41 ft (12.5 m) for the convertible to 49 ft (15 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)
1937–1949convertible, coupe, sedan (2 or 4 doors)158.3 in (4,020 mm)about 41 ft (12.5 m) for the convertible to 49 ft (15 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)
1935–1937convertible, coupe (2 doors)158.0 in (4,013 mm)about 41 ft (12.5 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m)

Olympia wrap cost factors

Olympia wrap cost depends on the amount of film, the number of panels, and the body style of the specific generation. A coupe needs about 44 ft (13.5 m) of film, while a wagon can need up to 61 ft (18.5 m) for the fifth generation. Chrome or patterned film adds up to about 69 ft (21 m) on that wagon, and areas like tailgates with glass need careful trimming.

  • Film for a full wrap: about 44 ft (13.5 m) for the coupe to 46 ft (14 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).
  • Body: coupe, sedan (2 or 4 doors).

Olympia wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Olympia, sixth generation, factory photo
Factory color shown

1967–1970 Olympia coupe, sedan (sixth generation)

1967–1970coupe, sedan (2 or 4 doors)164.6 in (4,182 mm)

The sixth-generation Opel Olympia (1967–1970) came as a coupe or sedan with two or four doors. The body style decides the panel plan and the film amount. The coupe needs about 44 ft (13.5 m) of 60-inch cast film, while the sedan needs about 46 ft (14 m).

Film: about 44 ft (13.5 m) for the coupe to 46 ft (14 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Opel Olympia, fifth generation, factory photo
Factory color shown

1957–1963 Olympia coupe, wagon (fifth generation)

1957–1963coupe, wagon (2 or 3 doors)164.6 in (4,182 mm) to 177.8 in (4,515 mm)

The fifth-generation Opel Olympia (1957–1963) had a restyling in 1960. Bumpers and lights changed, so film cut for one version does not fit the other. This generation offered a coupe and a wagon, with the wagon up to 177.8 in (4,515 mm) long.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) for the coupe to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Opel Olympia, fourth generation, factory photo
Factory color shown

1953–1957 Olympia convertible, sedan, wagon (fourth generation)

1953–1957convertible, sedan, wagon (2 or 3 doors)

The fourth-generation Opel Olympia (1953–1957) included a convertible body with an open top. A fabric top is not wrapped and the film ends where it begins, while a folding hard top is wrapped as panels of its own. The wagon styles also have a tailgate with the rear glass in it, so the film ends at the edge of the glass.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Opel Olympia, third generation, factory photo
Factory color shown

1950–1953 Olympia convertible, coupe, wagon (third generation)

1950–1953convertible, coupe, wagon (2 or 4 or 5 doors)158.3 in (4,020 mm)

The third-generation Opel Olympia (1950–1953) is a car where paint age matters before a full wrap. Panels may be original or repainted, so a test spot comes before a full wrap. This generation includes a convertible, a coupe, and a wagon with two, four, or five doors.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 41 ft (12.5 m) for the convertible to 49 ft (15 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Opel Olympia, second generation, factory photo
Factory color shown

1937–1949 Olympia convertible, coupe, sedan (second generation)

1937–1949convertible, coupe, sedan (2 or 4 doors)158.3 in (4,020 mm)

The second-generation Opel Olympia (1937–1949) is 158.3 in (4,020 mm) long with convertible, coupe, and sedan body styles. The size and style mean about 41 ft (12.5 m) of film for the convertible to 49 ft (15 m) for the sedan. A convertible uses fewer panels than a sedan because the fabric top is not wrapped.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 41 ft (12.5 m) for the convertible to 49 ft (15 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Opel Olympia, first generation, factory photo
Factory color shown

1935–1937 Olympia convertible, coupe (first generation)

1935–1937convertible, coupe (2 doors)158.0 in (4,013 mm)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on an Olympia

Smaller jobs on an Opel Olympia include a partial wrap of the roof, hood, or mirror caps. An Olympia chrome delete covers window trim and badges with black film to change the look. Paint protection film (PPF) is another option, with clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Opel Olympia: body, cut-outs and film

An Opel Olympia vinyl wrap is planned around the body style and size of the car. The catalog lists coupe, sedan, wagon, and convertible styles, with lengths from 158.3 in (4,020 mm) to 177.8 in (4,515 mm). Longer wagons need more film and more panels than shorter coupes.

When planning Olympia wrap ideas, some parts need extra work. On generations with a tailgate that includes the rear glass, the film ends at the edge of the glass. Convertible bodies are handled specially: a fabric top is not wrapped, and the film ends where the top begins.

How much vinyl to wrap an Olympia changes between generations because the body styles and sizes changed. The oldest generation in the catalog is a compact car at 158.3 in (4,020 mm), while a fifth-generation wagon reaches 177.8 in (4,515 mm). A restyling in 1960 also changed bumpers and lights, so film cut for one version does not fit the other.

Questions about wrapping an Opel Olympia

How much vinyl does it take to wrap an Opel Olympia?

A full wrap of the newest Opel Olympia body takes about 44 ft (13.5 m) for the coupe to 46 ft (14 m) for the sedan. That estimate uses 60-inch (1.52 m) cast film and does not include extra areas like door jambs.

Which Olympia body takes more film?

Between the Olympia body styles, a wagon takes more film than a coupe or sedan. The fifth-generation wagon needs about 61 ft (18.5 m) of film, while the coupe in that generation needs only about 44 ft (13.5 m).

Can I wrap only the hood or the roof of an Olympia?

Yes, you can wrap only the hood or the roof of an Opel Olympia. A partial wrap commonly includes the roof, hood, or mirror caps, and this is a good way to change one area without a full wrap.

Is an Olympia hard to wrap?

An Opel Olympia can be more work to wrap because of its body features. On wagons, a tailgate with the rear glass in it means the film must end at the edge of the glass, which requires precise cutting. Convertible bodies add work too because the film ends at the fabric top.