Wraps by car

Opel Omega wrap

The Opel Omega wrap page covers the first two generations of this full-size car and the vinyl wrap needed for a complete color change. The second generation ran from 1994 to 2003, and the first from 1984 to 1994. A full wrap of the newest sedan takes about 59 ft (18 m) of 60-inch (1.52 m) cast film.

2generations18 mof film for a full wrap

Opel Omega, second generation, factory photo
Opel Omega, second generation. Factory color shown.

Opel Omega wrap colors and ideas

  • Omega black wrap
  • Omega white wrap
  • Omega gray wrap
  • Omega silver wrap
  • Omega red wrap
  • Omega blue wrap
  • Omega green wrap
  • Omega yellow wrap
  • Omega orange wrap
  • Omega purple wrap
  • Omega pink wrap
  • Omega teal wrap
  • Omega brown wrap
  • Omega gold wrap
  • Omega chrome wrap
  • Omega color shift wrap
  • Omega carbon fiber wrap
  • Omega camo and patterned wrap

How much vinyl to wrap an Opel Omega

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1994–2003sedan, wagon (4 or 5 doors)188.4 in (4,785 mm) to 192.8 in (4,898 mm)about 59 ft (18 m) for the sedan to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)
1984–1994sedan, wagon (4 or 5 doors)186.6 in (4,740 mm) to 187.8 in (4,770 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Omega wrap cost factors

Omega wrap cost depends first on the body style and the generation, because the wagon and the newer car use more film. The second-generation sedan is 188.4 in (4,785 mm) long and the wagon is 192.8 in (4,898 mm), so the wagon wrap uses about 7 ft (2 m) more film. The condition of the paint and the amount of trim removal also change the labor time.

  • Film for a full wrap: about 59 ft (18 m) for the sedan to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 1999: bumpers and lights differ between the versions, and so do the film cuts.

Omega wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Omega, second generation, factory photo
Factory color shown

1994–2003 Omega sedan, wagon (second generation)

1994–2003sedan, wagon (4 or 5 doors)188.4 in (4,785 mm) to 192.8 in (4,898 mm)

The second-generation Opel Omega was restyled in 1999, and the bumpers and lights changed, so film cut for one version does not fit the other. The pre-1999 and post-1999 cars share the same main body panels, but the front and rear ends need different patterns. An installer who has a kit for one version cannot use it on the other without modifying the cuts.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) for the sedan to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Opel Omega, first generation, factory photo
Factory color shown

1984–1994 Omega sedan, wagon (first generation)

1984–1994sedan, wagon (4 or 5 doors)186.6 in (4,740 mm) to 187.8 in (4,770 mm)

The first-generation Opel Omega was built from 1984 to 1994, and paint age is a key point before wrapping. On a car of these years, panels may be original or repainted, and old paint can lift when the film is removed. A test spot on the paint comes before a full wrap to check that the surface is stable.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on an Omega

A partial wrap on an Opel Omega covers the roof, hood, or mirror caps instead of the whole car. A chrome delete covers the window trim and badges with black film, and paint protection film (PPF) is a clear film applied to the front end. These jobs use much less film than a full wrap and can be done on any generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Opel Omega: body, cut-outs and film

The Opel Omega vinyl wrap is shaped by the sedan and wagon bodies, which are four or five doors and close to 189 to 193 inches long. The wagon has a taller rear section, so it needs more film than the sedan of the same generation. Film is sold in 60-inch (1.52 m) rolls, and the wrap is planned around the panel lengths of each body style.

Omega wrap ideas start with the tailgate, because the rear glass is set into the tailgate and the film ends at the edge of the glass. The installer cuts the film to follow the glass line, and no film goes over the glass itself. Door handles, trim, and badges are removed or cut around so the film sits flat.

How much vinyl to wrap an Omega depends on the generation, and the two bodies are close in size but use different film amounts. A first-generation car takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, while a second-generation sedan takes about 59 ft (18 m) and a second-generation wagon about 66 ft (20 m). The difference comes from the longer second-generation body and the larger wagon rear.

Questions about wrapping an Opel Omega

How much vinyl does it take to wrap an Opel Omega?

A full wrap of the newest Opel Omega sedan takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. That figure covers the second-generation sedan from 1994 to 2003. The wagon of the same generation takes about 66 ft (20 m).

Which years of the Omega take the same film cuts?

The same film cuts fit the Opel Omega within each version of a generation, but not across the 1999 restyling of the second generation. The first generation, from 1984 to 1994, uses one set of cuts. The second generation, from 1994 to 2003, uses one set for 1994–1999 and another for 1999–2003 because the bumpers and lights changed.

Which Omega body takes more film?

The Omega wagon takes more film than the sedan. In the second generation, the wagon needs about 66 ft (20 m) of 60-inch (1.52 m) film, while the sedan needs about 59 ft (18 m). The wagon body is longer and has a larger rear area to cover.

Can I wrap only the hood or the roof of an Omega?

Yes, you can wrap only the hood or the roof of an Omega, and a partial wrap covers the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film, and paint protection film (PPF) goes on the front end as a clear film. These jobs use much less film than a full wrap.