Wraps by car

Opel Senator wrap

The Opel Senator wrap page covers both generations of the full-size sedan and the film a full wrap of the newest body takes. The second generation (1987–1993) needs about 59 ft (18 m) of 60-inch (1.52 m) cast film for a standard color change wrap. The first generation (1978–1987) needs about 52 ft (16 m) of the same width for a vinyl wrap. Chrome or patterned film adds roughly 10 ft (3 m) on either body.

2generations18 mof film for a full wrap

Opel Senator, second generation, factory photo
Opel Senator, second generation. Factory color shown.

Opel Senator wrap colors and ideas

  • Senator black wrap
  • Senator white wrap
  • Senator gray wrap
  • Senator silver wrap
  • Senator red wrap
  • Senator blue wrap
  • Senator green wrap
  • Senator yellow wrap
  • Senator orange wrap
  • Senator purple wrap
  • Senator pink wrap
  • Senator teal wrap
  • Senator brown wrap
  • Senator gold wrap
  • Senator chrome wrap
  • Senator color shift wrap
  • Senator carbon fiber wrap
  • Senator camo and patterned wrap

How much vinyl to wrap an Opel Senator

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1987–1993sedan (4 doors)190.7 in (4,845 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
1978–1987sedan (4 doors)190.5 in (4,839 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Senator wrap cost factors

Senator wrap cost depends on the film chosen, the amount of cut-out work and the condition of the paint rather than on a single fixed price. A chrome or patterned film needs about 69 ft (21 m) on the second generation and 66 ft (20 m) on the first, so patterned film adds material cost over the standard cast film. Paint age matters on a car of these years: original or repainted panels need different prep, and test spots add labor before the wrap. The installer's time to remove chrome trim, badges and door handles also changes the total cost.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).

Senator wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Senator, second generation, factory photo
Factory color shown

1987–1993 Senator sedan (second generation)

1987–1993sedan (4 doors)190.7 in (4,845 mm)

The second generation Opel Senator (1987–1993) is a four-door full-size sedan with a length of 190.7 in (4,845 mm). A standard color change wrap takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Paint age on a car of these years may mean original or repainted panels, and a test spot comes before a full wrap to check adhesion. The lower body cladding and integrated bumpers on this generation add curved surfaces that need stretching and post-heating.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Opel Senator, first generation, factory photo
Factory color shown

1978–1987 Senator sedan (first generation)

1978–1987sedan (4 doors)190.5 in (4,839 mm)

The first generation Opel Senator (1978–1987) is a four-door full-size sedan with a length of 190.5 in (4,839 mm). A standard color change wrap takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. The size and the single body style mean the film estimate stays consistent, with four doors, a long roof and a large trunk as the main panels. This generation has less lower cladding than the later one, so the wrap uses fewer square feet for the same panel count.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Senator

A partial wrap on an Opel Senator can cover the roof, hood, mirror caps or any combination of those panels. A Senator chrome delete covers the window trim and badges with black film for a more modern look. Paint protection film (PPF) is clear film on the front end and is another partial job that fits the long hood and upright grille of the Senator.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Opel Senator: body, cut-outs and film

An Opel Senator vinyl wrap covers a four-door full-size sedan, so the long body and fixed metal roof set the basic film use. The second generation is 190.7 in (4,845 mm) long and the first is 190.5 in (4,839 mm), nearly the same length. Both have one body style, which makes film estimates repeatable from panel to panel. A full wrap includes the doors, fenders, hood, trunk lid, roof and bumpers, with no separate hatch or tailgate to plan around.

Senator wrap ideas start with the bright trim: the window surrounds, door handles and badges are usually chrome from the factory. A chrome delete (bright trim covered with black film) adds cut-out time and roughly 10 ft (3 m) of film to the job. The door mirrors, door handles, trim strips and badges should come off for a clean finish, and the rear spoiler on some versions is easier to wrap off the car. The wrap installer also removes the antenna and wiper arms before laying film on the roof and trunk.

How much vinyl to wrap a Senator depends on the generation more than the body style, because both are four-door sedans of almost the same length. The second generation takes about 59 ft (18 m) of 60-inch (1.52 m) film in a standard color, while the first takes about 52 ft (16 m). The difference comes from the newer car's larger bumpers, lower side skirts and deeper front and rear fascias. A buyer who counts film for a fleet or a paint protection job uses the higher figure for a 1987–1993 Senator.

Questions about wrapping an Opel Senator

How much vinyl does it take to wrap an Opel Senator?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast film to wrap an Opel Senator of the newest body (1987–1993). For a first generation Senator (1978–1987) the figure is about 52 ft (16 m) of the same width. Chrome or patterned film adds roughly 10 ft (3 m) to either body.

Can I wrap only the hood or the roof of a Senator?

Yes, you can wrap only the hood or the roof of a Senator. These are partial wrap jobs and leave the doors and fenders in the original color. A Senator chrome delete on the window trim and badges is another partial option that changes the look without covering large panels.

Is a Senator hard to wrap?

A Senator is not hard to wrap for an installer, but its full-size body adds surface area and the bright trim adds cut-out work. The four doors, long roof and large trunk take time to lay film without wrinkles. The chrome window surrounds, door handles and badges should come off for a clean edge, which adds labor.

How many generations of the Senator does this page cover?

This page covers two generations of the Opel Senator. The first generation ran from 1978 to 1987 and the second from 1987 to 1993. Both are four-door full-size sedans, and each has its own film estimate on this page.