Wraps by car

Opel Sintra wrap

The Opel Sintra wrap page covers the 1996–1999 minivan. This catalog lists one generation of the Sintra. A full vinyl wrap of the first-generation body takes about 69 ft (21 m) of 60-inch (1.52 m) cast film.

1generations21 mof film for a full wrap

Opel Sintra, first generation, factory photo
Opel Sintra, first generation. Factory color shown.

Opel Sintra wrap colors and ideas

  • Sintra black wrap
  • Sintra white wrap
  • Sintra gray wrap
  • Sintra silver wrap
  • Sintra red wrap
  • Sintra blue wrap
  • Sintra green wrap
  • Sintra yellow wrap
  • Sintra orange wrap
  • Sintra purple wrap
  • Sintra pink wrap
  • Sintra teal wrap
  • Sintra brown wrap
  • Sintra gold wrap
  • Sintra chrome wrap
  • Sintra color shift wrap
  • Sintra carbon fiber wrap
  • Sintra camo and patterned wrap

How much vinyl to wrap an Opel Sintra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–1999van (5 doors)183.9 in (4,670 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

Sintra wrap cost factors

Sintra wrap cost depends on the film type, the areas wrapped, and the labor for a tall van body. A full wrap of the 183.9 in (4,670 mm) long Sintra needs about 69 ft (21 m) of film for solid colors. Chrome or patterned film raises material use to about 80 ft (24.5 m).

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (70.1 in (1,780 mm)): the roof is wrapped from a platform.

Sintra wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Sintra, first generation, factory photo
Factory color shown

1996–1999 Sintra van (first generation)

1996–1999van (5 doors)183.9 in (4,670 mm)

The first-generation Opel Sintra from 1996–1999 has sliding side doors that affect the wrap. The door tracks stay bare, and the film is cut along them. This keeps the doors working smoothly after the wrap.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (70.1 in (1,780 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on a Sintra

A partial wrap on the Opel Sintra can cover the roof, hood, or mirror caps. Sintra chrome delete covers the window trim and badges with black film. Clear paint protection film (PPF) on the front end is another option for partial coverage.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Opel Sintra: body, cut-outs and film

The Opel Sintra vinyl wrap job starts with a tall van body of 183.9 in (4,670 mm) in length. A wrap of this size uses more film than a compact car and needs a lifting platform for the roof. The five-door van shape has large flat side panels that keep cutting simple.

Sintra wrap ideas must account for the sliding side doors. The door tracks stay bare, so the film is cut along them. The tall body of 70.1 in (1,780 mm) means the roof is wrapped from a platform.

How much vinyl to wrap a Sintra depends on the film choice and the body areas. A color change with solid cast film needs about 69 ft (21 m) of 60-inch (1.52 m) material. Chrome or patterned film requires about 80 ft (24.5 m) because of pattern alignment.

Questions about wrapping an Opel Sintra

How much vinyl does it take to wrap an Opel Sintra?

A full Opel Sintra wrap takes about 69 ft (21 m) of 60-inch (1.52 m) cast film. This estimate is for a solid color wrap on the first-generation body. Chrome or patterned film raises the amount to about 80 ft (24.5 m).

Are the sliding doors of a Sintra wrapped?

The sliding doors of a Sintra are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors slide freely. This detail is planned before the vinyl is applied.

Can I wrap only the hood or the roof of a Sintra?

Yes, you can wrap only the hood or the roof of a Sintra. A partial wrap includes options like the roof, hood, or mirror caps. Clear paint protection film (PPF) on the front end is also a partial job.

Is a Sintra hard to wrap?

A Sintra wrap adds work because of its tall 70.1 in (1,780 mm) body and sliding doors. The roof is wrapped from a platform, and the door tracks must be kept bare. These details require careful cutting but are standard for this van.