Wraps by car

Opel Super Six wrap

The Opel Super Six wrap guide covers a single generation of the car, produced from 1936 to 1938. A full vinyl wrap of the newest body takes about 51 feet (15.5 meters) for the convertible. For the sedan, plan on 52 feet (16 meters) of 60-inch (1.52 meter) cast film.

1generations15.5 mof film for a full wrap

Opel Super Six, first generation, factory photo
Opel Super Six, first generation. Factory color shown.

Opel Super Six wrap colors and ideas

  • Super Six black wrap
  • Super Six white wrap
  • Super Six gray wrap
  • Super Six silver wrap
  • Super Six red wrap
  • Super Six blue wrap
  • Super Six green wrap
  • Super Six yellow wrap
  • Super Six orange wrap
  • Super Six purple wrap
  • Super Six pink wrap
  • Super Six teal wrap
  • Super Six brown wrap
  • Super Six gold wrap
  • Super Six chrome wrap
  • Super Six color shift wrap
  • Super Six carbon fiber wrap
  • Super Six camo and patterned wrap

How much vinyl to wrap an Opel Super Six

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1936–1938convertible, sedan (2 or 4 doors)172.0 in (4,370 mm)about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)

Super Six wrap cost factors

The Super Six wrap cost depends on the size of the body and the film you pick. The convertible needs about 51 feet (15.5 meters) and the sedan about 52 feet (16 meters) of 60-inch (1.52 meter) film. The final number also changes with the film type, because chrome or patterned film can raise the total to about 62 feet (19 meters). The shop's time and the number of cut-outs add to the work as well.

  • Film for a full wrap: about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).
  • Body: convertible, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Super Six wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Super Six, first generation, factory photo
Factory color shown

1936–1938 Super Six convertible, sedan (first generation)

1936–1938convertible, sedan (2 or 4 doors)172.0 in (4,370 mm)

The open top of the Opel Super Six is treated differently in a wrap. A fabric top is not wrapped, so the film ends at the edge where the roof begins. If the car has a folding hard top, that part is wrapped as its own set of panels. This keeps the lines of the car clean and avoids film failing where the top moves.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Super Six

A partial wrap on a Super Six can cover just the roof, hood, or mirror caps. A Super Six chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is another option, with clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Opel Super Six: body, cut-outs and film

The Opel Super Six vinyl wrap has to follow two body styles with different surfaces. The convertible measures 172.0 inches (4,370 mm) and the sedan comes in two-door or four-door forms. This size and these shapes mean the wrap film needs a clean run around the doors and rear quarters. The installer must also account for the fabric top before cutting the film.

Super Six wrap ideas work best when they respect the bright trim and the convertible's soft top. The fabric roof is not wrapped, so the film ends where the top begins. The folding hard top, if fitted, is wrapped as panels of its own. Chrome pieces can be covered with black film for a chrome delete, but the badges and window trim need careful cut-outs.

How much vinyl to wrap a Super Six depends on the body style you own. The first generation ran from 1936 to 1938 and stayed close in overall size. The convertible needs about 51 feet (15.5 meters) of film, while the sedan needs 52 feet (16 meters). These numbers count on 60-inch (1.52 meter) cast film, and chrome or patterned film can push the total to about 62 feet (19 meters).

Questions about wrapping an Opel Super Six

How much vinyl does it take to wrap an Opel Super Six?

It takes about 51 feet (15.5 meters) of vinyl to wrap an Opel Super Six convertible. The sedan body uses about 52 feet (16 meters), both with 60-inch (1.52 meter) cast film. If you choose chrome or patterned film, the total can go up to about 62 feet (19 meters).

Is the top of a Super Six wrapped?

No, the fabric top of a Super Six is not wrapped. The film ends at the edge where the fabric begins. A folding hard top on the convertible is wrapped as its own panels.

Which Super Six body takes more film?

The sedan takes more film to wrap than the convertible. A Super Six sedan uses about 52 feet (16 meters) of 60-inch (1.52 meter) film. The convertible needs about 51 feet (15.5 meters) of the same material.

Can I wrap only the hood or the roof of a Super Six?

Yes, you can wrap only the hood or the roof of a Super Six as a partial wrap. The roof and hood are common areas for this smaller job. You can also wrap only the mirror caps. A partial wrap uses less film than a full wrap.