Wraps by car

Opel Vectra OPC wrap

The Opel Vectra OPC wrap page covers this performance mid-size car in full. The catalog contains one generation, the third, produced from 2005 to 2008. A full vinyl wrap of the newest body takes about 52 ft (16 m) for the hatchback and 64 ft (19.5 m) for the wagon.

1generations16 mof film for a full wrap

Opel Vectra OPC, third generation, factory photo
Opel Vectra OPC, third generation. Factory color shown.

Opel Vectra OPC wrap colors and ideas

  • Vectra OPC black wrap
  • Vectra OPC white wrap
  • Vectra OPC gray wrap
  • Vectra OPC silver wrap
  • Vectra OPC red wrap
  • Vectra OPC blue wrap
  • Vectra OPC green wrap
  • Vectra OPC yellow wrap
  • Vectra OPC orange wrap
  • Vectra OPC purple wrap
  • Vectra OPC pink wrap
  • Vectra OPC teal wrap
  • Vectra OPC brown wrap
  • Vectra OPC gold wrap
  • Vectra OPC chrome wrap
  • Vectra OPC color shift wrap
  • Vectra OPC carbon fiber wrap
  • Vectra OPC camo and patterned wrap

How much vinyl to wrap an Opel Vectra OPC

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2008hatchback, wagon (5 doors)182.8 in (4,642 mm) to 191.7 in (4,870 mm)about 52 ft (16 m) for the hatchback to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)

Vectra OPC wrap cost factors

Vectra OPC wrap cost depends on the body style, the film, and the shop's labor. The wagon uses about 12 ft (3.5 m) more film than the hatchback, so a full wrap on a wagon costs more in material. Patterned or chrome film uses up to about 74 ft (22.5 m) and adds layout time. Cut-outs for fog lamps and the tailgate glass also add time.

  • Film for a full wrap: about 52 ft (16 m) for the hatchback to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).
  • Body: hatchback, wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2005: bumpers and lights differ between the versions, and so do the film cuts.

Vectra OPC wraps by generation

Swipe sideways. Tap a card for the full description.

Opel Vectra OPC, third generation, factory photo
Factory color shown

2005–2008 Vectra OPC hatchback, wagon (third generation)

2005–2008hatchback, wagon (5 doors)182.8 in (4,642 mm) to 191.7 in (4,870 mm)

The third generation of the Opel Vectra OPC ran from 2005 to 2008. Midway through, in 2005, the car was restyled with new bumpers and lights. A wrap kit cut for the earlier bumper will not fit the later one, and the same is true in reverse. When you order a kit, check the production date of your car.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) for the hatchback to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Vectra OPC

A Vectra OPC chrome delete covers the window trim and badges with black film. Partial wrap jobs on this car often include the roof, the hood, and the mirror caps. Clear paint protection film (PPF) on the front end is another option to protect the paint. These jobs use less film than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Opel Vectra OPC: body, cut-outs and film

The Opel Vectra OPC vinyl wrap is shaped by its two body styles. The hatchback and wagon both have five doors, with lengths from 182.8 in (4,642 mm) to 191.7 in (4,870 mm). A 60-inch (1.52 m) roll leaves little waste on the lower panels. The wagon adds about 12 ft (3.5 m) to the hatchback figure.

Vectra OPC wrap ideas start with the tailgate. The rear glass sits in the tailgate, so the film must end at the edge of the glass. Every trim has fog lamps in the front bumper, which need cut-outs in the bumper film. Door handles and mirror caps come off for a clean edge.

How much vinyl to wrap a Vectra OPC depends on the body and the film. The hatchback takes about 52 ft (16 m) of 60-inch (1.52 m) cast film, while the wagon takes about 64 ft (19.5 m). Chrome or patterned film can run up to about 74 ft (22.5 m) because the pattern must be matched. The third generation was restyled in 2005, and the bumper and light shapes changed, so film cut for a pre-restyle car does not fit a post-restyle car.

Questions about wrapping an Opel Vectra OPC

How much vinyl does it take to wrap an Opel Vectra OPC?

An Opel Vectra OPC takes about 52 ft (16 m) for the hatchback and 64 ft (19.5 m) for the wagon. The estimate uses 60-inch (1.52 m) cast film, the standard width for vehicle wraps. Patterned or chrome film can run up to about 74 ft (22.5 m) because you need extra material to match the pattern.

Which years of the Vectra OPC take the same film cuts?

The Vectra OPC was made from 2005 to 2008 with a restyle in 2005. The bumpers and lights were changed in the restyle, so film templates do not cross that line. A car from before the restyle shares cuts with other pre-restyle cars of the same body style. A car from after the restyle shares cuts only with other post-restyle cars.

Which Vectra OPC body takes more film?

The Vectra OPC wagon takes more film than the hatchback. The wagon body is longer, up to 191.7 in (4,870 mm), and needs about 64 ft (19.5 m) of film. The hatchback needs about 52 ft (16 m). The difference is about 12 ft (3.5 m) of film on a 60-inch (1.52 m) roll.

Can I wrap only the hood or the roof of a Vectra OPC?

Yes, you can wrap only the hood or the roof of a Vectra OPC. Partial wrap jobs on this car typically include the roof, the hood, and the mirror caps. A chrome delete covers the window trim and badges with black film. You can also put clear paint protection film (PPF) on the front end without wrapping the whole car.