Wraps by car

Porsche 356 wrap

The Porsche 356 wrap page covers all four generations, from 1948 through 1965. A full vinyl wrap of the newest body takes about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe. The film is 60-inch (1.52 m) cast vinyl, with chrome or patterned film needing up to about 49 ft (15 m).

4generations12 mof film for a full wrap

Porsche 356, fourth generation, factory photo
Porsche 356, fourth generation. Factory color shown.

Porsche 356 wrap colors and ideas

  • Porsche 356 black wrap
  • Porsche 356 white wrap
  • Porsche 356 gray wrap
  • Porsche 356 silver wrap
  • Porsche 356 red wrap
  • Porsche 356 blue wrap
  • Porsche 356 green wrap
  • Porsche 356 yellow wrap
  • Porsche 356 orange wrap
  • Porsche 356 purple wrap
  • Porsche 356 pink wrap
  • Porsche 356 teal wrap
  • Porsche 356 brown wrap
  • Porsche 356 gold wrap
  • Porsche 356 chrome wrap
  • Porsche 356 color shift wrap
  • Porsche 356 carbon fiber wrap
  • Porsche 356 camo and patterned wrap

How much vinyl to wrap a Porsche 356

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1963–1965convertible, coupe (2 doors)157.9 in (4,010 mm)about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 49 ft (15 m)
1959–1963convertible, coupe (2 doors)157.9 in (4,010 mm)about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 49 ft (15 m)
1955–1959convertible, coupe (2 doors)155.5 in (3,950 mm)about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 49 ft (15 m)
1948–1955convertible, coupe (2 doors)151.6 in (3,850 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

Porsche 356 wrap cost factors

The Porsche 356 wrap cost depends on the generation, body style, amount of film, and paint condition. The first generation needs about 41 ft (12.5 m) of film, while later coupes take up to 43 ft (13 m). Older cars may need extra prep if the paint is original or repainted, which can add labor.

  • Film for a full wrap: about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 49 ft (15 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Porsche 356 wraps by generation

Swipe sideways. Tap a card for the full description.

Porsche 356, fourth generation, factory photo
Factory color shown

1963–1965 Porsche 356 convertible, coupe (fourth generation)

1963–1965convertible, coupe (2 doors)157.9 in (4,010 mm)

On the open-top Porsche 356, the fabric top is not wrapped and the film ends where it begins. If it has a folding hard top, that top is wrapped as panels of its own. This keeps the vinyl from interfering with the top's operation.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 49 ft (15 m).

Porsche 356, third generation, factory photo
Factory color shown

1959–1963 Porsche 356 convertible, coupe (third generation)

1959–1963convertible, coupe (2 doors)157.9 in (4,010 mm)

The Porsche 356 in convertible or coupe style decides the panel plan and the film amount. A convertible takes about 39 ft (12 m) of 60-inch cast film, while a coupe takes about 43 ft (13 m). Both styles have two long doors that are each wrapped as one large piece.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 49 ft (15 m).

Porsche 356, second generation, factory photo
Factory color shown

1955–1959 Porsche 356 convertible, coupe (second generation)

1955–1959convertible, coupe (2 doors)155.5 in (3,950 mm)

Paint age on a Porsche 356 from 1955–1959 can affect the wrap process. Panels may be original or repainted, and a test spot before a full wrap shows whether the film will adhere cleanly. A test spot also reveals any loose paint or filler that needs attention.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 49 ft (15 m).

Porsche 356, first generation, factory photo
Factory color shown

1948–1955 Porsche 356 convertible, coupe (first generation)

1948–1955convertible, coupe (2 doors)151.6 in (3,850 mm)

The size and body style of the first-generation Porsche 356 set the film amount and panel count. At 151.6 in (3,850 mm) long, it takes about 41 ft (12.5 m) of 60-inch cast film. Its two long doors are each wrapped as one large piece, keeping the panel layout simple.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on a Porsche 356

A partial wrap on a Porsche 356 can cover the roof, hood, or mirror caps. For a chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Porsche 356: body, cut-outs and film

The Porsche 356 vinyl wrap is shaped by its compact two-door body. The car ranges from 151.6 in (3,850 mm) in the first generation to 157.9 in (4,010 mm) in the third and fourth. Both convertible and coupe bodies have two long side doors, each wrapped as one large piece of film.

For Porsche 356 wrap ideas, focus on the doors, top edges, and bright trim. The two long side doors are each covered with one large piece of film, so seams stay out of sight. Convertible bodies have a fabric top that is not wrapped, and the film ends cleanly where the top begins.

To know how much vinyl to wrap a Porsche 356, compare the four generations and their body styles. The first generation is the shortest at 151.6 in (3,850 mm) and takes about 41 ft (12.5 m) of 60-inch film. Later generations are longer and take about 39 ft (12 m) for a convertible to 43 ft (13 m) for a coupe.

Questions about wrapping a Porsche 356

How much vinyl does it take to wrap a Porsche 356?

A Porsche 356 takes about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe, using 60-inch (1.52 m) cast film. Chrome or patterned film raises the total to about 49 ft (15 m). These figures apply to the third and fourth generation bodies.

Is the top of a Porsche 356 wrapped?

No, the fabric top of a Porsche 356 convertible is not wrapped. The film ends where the top begins, leaving the fabric untouched. A folding hard top, if fitted, is wrapped as separate panels.

Which Porsche 356 body takes more film?

The coupe body of the Porsche 356 takes more film than the convertible. A coupe needs about 43 ft (13 m), while a convertible takes about 39 ft (12 m). Both use the same 60-inch cast film.

Can I wrap only the hood or the roof of a Porsche 356?

Yes, you can wrap only the hood or the roof of a Porsche 356. A partial wrap also commonly includes mirror caps. Chrome delete covers window trim and badges, and paint protection film is offered for the front end.