Wraps by car

Porsche 914 wrap

The Porsche 914 wrap page covers the 1969–1976 targa sports car and one generation. A full wrap of this body takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast vinyl wrap. Chrome or patterned film raises the total to about 46 ft (14 m).

1generations12.5 mof film for a full wrap

Porsche 914, first generation, factory photo
Porsche 914, first generation. Factory color shown.

Porsche 914 wrap colors and ideas

  • Porsche 914 black wrap
  • Porsche 914 white wrap
  • Porsche 914 gray wrap
  • Porsche 914 silver wrap
  • Porsche 914 red wrap
  • Porsche 914 blue wrap
  • Porsche 914 green wrap
  • Porsche 914 yellow wrap
  • Porsche 914 orange wrap
  • Porsche 914 purple wrap
  • Porsche 914 pink wrap
  • Porsche 914 teal wrap
  • Porsche 914 brown wrap
  • Porsche 914 gold wrap
  • Porsche 914 chrome wrap
  • Porsche 914 color shift wrap
  • Porsche 914 carbon fiber wrap
  • Porsche 914 camo and patterned wrap

How much vinyl to wrap a Porsche 914

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1969–1976targa (2 doors)156.9 in (3,985 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

Porsche 914 wrap cost factors

Porsche 914 wrap cost depends on film type, body panels, and the work the targa roof adds. A cast color change on this small 156.9 in (3,985 mm) body uses about 41 ft (12.5 m) of 60-inch (1.52 m) film. Chrome or patterned film pushes the estimate to about 46 ft (14 m) and adds cutting time.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).
  • Body: targa (2 doors).
  • Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Porsche 914 wraps by generation

Swipe sideways. Tap a card for the full description.

Porsche 914, first generation, factory photo
Factory color shown

1969–1976 Porsche 914 targa (first generation)

1969–1976targa (2 doors)156.9 in (3,985 mm)

The first generation Porsche 914 has an open top that is never covered with film. On a targa, the fabric roof stays unwrapped and the vinyl ends at the edge where the roof meets the body. A folding hard top is wrapped as its own panels, with seams on the roof itself.

Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on a Porsche 914

A partial wrap on a Porsche 914 can cover the hood, mirror caps, or rear deck without doing the whole car. Chrome delete on this model means black film over window trim and badges. Paint protection film (PPF) is another focused job, with clear film on the front end of the 914.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Porsche 914: body, cut-outs and film

A Porsche 914 vinyl wrap has to follow a short 156.9 in (3,985 mm) two-door targa body. The small footprint keeps material use moderate, but the targa top and rear deck add distinct panels. Installers plan the film around the removable roof and the sail panels behind the doors.

Porsche 914 wrap ideas work best when the targa top is treated as its own area. The fabric roof is not wrapped, so the film ends cleanly where the top meets the body. A folding hard top is wrapped as separate panels, which adds seams and a little more film.

How much vinyl to wrap a Porsche 914 stays the same across the single generation, because all 1969–1976 cars share one body. Differences in condition and optional trim can change the amount of chrome or patterned film. Counting film still starts from the same 41 ft (12.5 m) base for a full wrap.

Questions about wrapping a Porsche 914

How much vinyl does it take to wrap a Porsche 914?

A full wrap of a Porsche 914 takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. Patterned or chrome film raises the estimate to about 46 ft (14 m). These figures fit the 156.9 in (3,985 mm) two-door targa body of the single generation.

Is the top of a Porsche 914 wrapped?

No, the top of a Porsche 914 is not wrapped when it is the fabric targa roof. The film ends where the roof panel meets the painted body, leaving the fabric untouched. A folding hard top is the exception and is wrapped as its own set of panels.

Can I wrap only the hood or the roof of a Porsche 914?

Yes, you can wrap only the hood or the roof area of a Porsche 914. A partial wrap on this car often covers the hood, mirror caps, or rear deck by itself. The removable targa roof can also be done as a separate panel job.

Is a Porsche 914 hard to wrap?

A Porsche 914 is not the hardest car to wrap, but the targa top adds work. The fabric roof must be left bare, so the film ends cleanly at the roof edge, and a folding hard top needs separate panels. The 156.9 in (3,985 mm) body is small, which makes the main panels straightforward for a careful installer.