Wraps by car

Porsche 944 wrap

The Porsche 944 wrap page covers the first generation produced from 1981 to 1991. This sports car came as a convertible and a coupe with two doors. A full vinyl wrap of the newest body takes about 43 ft (13 m) for the convertible to 46 ft (14 m) for the coupe.

1generations13 mof film for a full wrap

Porsche 944, first generation, factory photo
Porsche 944, first generation. Factory color shown.

Porsche 944 wrap colors and ideas

  • Porsche 944 black wrap
  • Porsche 944 white wrap
  • Porsche 944 gray wrap
  • Porsche 944 silver wrap
  • Porsche 944 red wrap
  • Porsche 944 blue wrap
  • Porsche 944 green wrap
  • Porsche 944 yellow wrap
  • Porsche 944 orange wrap
  • Porsche 944 purple wrap
  • Porsche 944 pink wrap
  • Porsche 944 teal wrap
  • Porsche 944 brown wrap
  • Porsche 944 gold wrap
  • Porsche 944 chrome wrap
  • Porsche 944 color shift wrap
  • Porsche 944 carbon fiber wrap
  • Porsche 944 camo and patterned wrap

How much vinyl to wrap a Porsche 944

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1981–1991convertible, coupe (2 doors)166.5 in (4,230 mm)about 43 ft (13 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m)

Porsche 944 wrap cost factors

Porsche 944 wrap cost depends on the size of the car, the film chosen, and the labor for preparation and installation. The coupe needs more film than the convertible, about 46 ft (14 m) versus 43 ft (13 m). Chrome or patterned film can require up to about 51 ft (15.5 m), which adds to material cost. The condition of the paint and the number of parts removed also affect the total.

  • Film for a full wrap: about 43 ft (13 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Porsche 944 wraps by generation

Swipe sideways. Tap a card for the full description.

Porsche 944, first generation, factory photo
Factory color shown

1981–1991 Porsche 944 convertible, coupe (first generation)

1981–1991convertible, coupe (2 doors)166.5 in (4,230 mm)

The first generation Porsche 944 from 1981 to 1991 has an open top on the convertible that is not wrapped. The fabric top is left as it is, and the vinyl film ends where the fabric begins. If the car has a folding hard top, that top is wrapped as separate panels. The coupe has a fixed roof that is wrapped with the rest of the body.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Porsche 944

For a Porsche 944, a partial wrap can cover just the roof, hood, or mirror caps. Chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Porsche 944: body, cut-outs and film

A Porsche 944 vinyl wrap follows the body styles and sizes of this car. The coupe measures 166.5 in (4,230 mm) long and has a large roof and rear glass area. The convertible body is the same length but has a fabric top that is not wrapped. For the coupe, the roof and pillars are wrapped in one continuous piece, which uses more film.

Porsche 944 wrap ideas include handling the parts that come off or need cut-outs. The two long side doors are each one large piece of film, so they are wrapped without seams. Door handles, mirrors, and badges are removed for a clean finish. The front bumper and headlight openings require precise cut-outs.

How much vinyl to wrap a Porsche 944 depends on the generation, but there is only one generation from 1981 to 1991. The body styles differ, so the amount of film changes between the convertible and coupe. The convertible needs about 43 ft (13 m) of 60-inch (1.52 m) cast film. The coupe needs about 46 ft (14 m) of the same film.

Questions about wrapping a Porsche 944

How much vinyl does it take to wrap a Porsche 944?

It takes about 43 ft (13 m) for the convertible to 46 ft (14 m) for the coupe of 60-inch (1.52 m) cast film to wrap a Porsche 944. The amount depends on the body style. Chrome or patterned film may require up to about 51 ft (15.5 m) due to pattern matching.

Is the top of a Porsche 944 wrapped?

No, the fabric top of a convertible Porsche 944 is not wrapped. The film ends where the fabric begins. A folding hard top, if fitted, is wrapped as separate panels.

Which Porsche 944 body takes more film?

The coupe takes more film than the convertible. The coupe needs about 46 ft (14 m) of 60-inch (1.52 m) cast film. The convertible needs about 43 ft (13 m) of the same film.

Can I wrap only the hood or the roof of a Porsche 944?

Yes, you can wrap only the hood or the roof of a Porsche 944. Partial wraps are an option for those areas. Mirror caps can also be wrapped individually.