Wraps by car

Buick Electra E5 wrap

The Buick Electra E5 wrap is a color change or protection job on this electric SUV. Buick has produced one generation of the Electra E5, introduced in 2023. A full wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. The vinyl wrap covers the painted panels and leaves the glass and trim exposed.

1generations20 mof film for a full wrap

Buick Electra E5, first generation, factory photo
Buick Electra E5, first generation. Factory color shown.

Buick Electra E5 wrap colors and ideas

  • Electra E5 black wrap
  • Electra E5 white wrap
  • Electra E5 gray wrap
  • Electra E5 silver wrap
  • Electra E5 red wrap
  • Electra E5 blue wrap
  • Electra E5 green wrap
  • Electra E5 yellow wrap
  • Electra E5 orange wrap
  • Electra E5 purple wrap
  • Electra E5 pink wrap
  • Electra E5 teal wrap
  • Electra E5 brown wrap
  • Electra E5 gold wrap
  • Electra E5 chrome wrap
  • Electra E5 color shift wrap
  • Electra E5 carbon fiber wrap
  • Electra E5 camo and patterned wrap

How much vinyl to wrap a Buick Electra E5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowSUV (5 doors)192.6 in (4,892 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Electra E5 wrap cost factors

Electra E5 wrap cost depends on the film type and the amount of labor. A full wrap uses about 66 ft (20 m) of film, while a chrome or patterned film uses about 74 ft (22.5 m). The 2025 restyling changed the bumpers, so the installer may need extra time to trim. Removing and reinstalling the charge port door also adds labor.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2025: bumpers and lights differ between the versions, and so do the film cuts.

Electra E5 wraps by generation

Swipe sideways. Tap a card for the full description.

Buick Electra E5, first generation, factory photo
Factory color shown

2023–now Electra E5 SUV (first generation)

2023–nowSUV (5 doors)192.6 in (4,892 mm)

The first generation Buick Electra E5 runs from 2023 onward. A restyling in 2025 changed the bumpers and lights, so film cut for one version does not fit the other. For a full wrap, the installer must use the correct template or hand-cut those areas. The body length stays at 192.6 in (4,892 mm), so the film quantity is unchanged.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on an Electra E5

For a partial wrap on an Electra E5, the roof, hood, or mirror caps can be covered individually. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Buick Electra E5: body, cut-outs and film

A Buick Electra E5 vinyl wrap must cover a large five-door SUV body. The vehicle is 192.6 in (4,892 mm) long, so the film is cut into long panels. The tailgate includes the rear glass, so the film stops at the edge of the glass. The roof and hood are large flat areas that use film efficiently.

Electra E5 wrap ideas often focus on the charge port door and tailgate. The charge port door is wrapped as a small piece of its own, so it can be left in the original color or covered. The tailgate's rear glass means the film ends cleanly at the glass edge. Badges and window trim can be covered with black film for a chrome delete.

How much vinyl to wrap an Electra E5 depends on the film and the version. The car is 192.6 in (4,892 mm) long and needs about 66 ft (20 m) of standard cast film. A chrome or patterned film takes about 74 ft (22.5 m) because the pattern must be matched. The single generation from 2023 onward has the same body size.

Questions about wrapping a Buick Electra E5

How much vinyl does it take to wrap a Buick Electra E5?

A Buick Electra E5 takes about 66 ft (20 m) of 60-inch (1.52 m) cast film for a full wrap. That amount covers the painted surfaces of the 2023 and newer body. If you choose chrome or patterned film, you need about 74 ft (22.5 m).

Which years of the Electra E5 take the same film cuts?

The Electra E5 has one generation from 2023 to now. The 2025 restyling changed the bumpers and lights, so film cuts for the pre-2025 version do not fit the updated version. For the same film cuts, use a car from before 2025 or from 2025 onward.

Can I wrap only the hood or the roof of an Electra E5?

Yes, you can wrap only the hood or the roof of an Electra E5. A partial wrap can cover the roof, hood, or mirror caps. The hood and roof are large flat panels that can be wrapped with a single piece of film.

Is an Electra E5 hard to wrap?

An Electra E5 is not especially hard to wrap, but it has two areas that add work. The tailgate includes the rear glass, so the film must be trimmed precisely at the glass edge. The charge port door is wrapped as a small piece of its own. The 192.6 in (4,892 mm) length means the installer handles long panels.