Wraps by car

Buick Envision wrap

The Buick Envision wrap page covers both generations of this SUV, from the first models of 2014 through the current second generation. A full vinyl wrap of the newest Envision body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. The first generation is a similar size, so its full wrap also requires close to that amount of film.

2generations

Buick Envision, second generation, factory photo
Buick Envision, second generation. Factory color shown.

Buick Envision wrap colors and ideas

  • Envision black wrap
  • Envision white wrap
  • Envision gray wrap
  • Envision silver wrap
  • Envision red wrap
  • Envision blue wrap
  • Envision green wrap
  • Envision yellow wrap
  • Envision orange wrap
  • Envision purple wrap
  • Envision pink wrap
  • Envision teal wrap
  • Envision brown wrap
  • Envision gold wrap
  • Envision chrome wrap
  • Envision color shift wrap
  • Envision carbon fiber wrap
  • Envision camo and patterned wrap

How much vinyl to wrap a Buick Envision

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)——
2014–2020SUV (5 doors)183.7 in (4,666 mm) to 183.7 in (4,667 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Envision wrap cost factors

The Envision wrap cost depends on the size of the job, the film type, and the amount of disassembly. A full color change wrap on this compact SUV uses about 62 ft (19 m) of 60-inch film, but chrome or patterned film can add up to 70 ft (21.5 m) on the first generation. Wrapping the front bumper, mirrors, and rocker panels takes extra labor due to their curves. The final price is also affected by whether you choose a partial wrap or paint protection film.

  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2024: bumpers and lights differ between the versions, and so do the film cuts.

Envision wraps by generation

Swipe sideways. Tap a card for the full description.

Buick Envision, second generation, factory photo
Factory color shown

2020–now Envision SUV (second generation)

2020–nowSUV (5 doors)

The second generation Buick Envision received a restyling in 2024. That restyling changed the bumpers and lights, so film cut for one version does not fit the other. If you buy pre-cut film, you must match it to the correct production years. A shop that cuts film on the car can handle either version, but the patterns are not interchangeable.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Buick Envision, first generation, factory photo
Factory color shown

2014–2020 Envision SUV (first generation)

2014–2020SUV (5 doors)183.7 in (4,666 mm) to 183.7 in (4,667 mm)

The first generation Buick Envision is a five-door SUV with a length of 183.7 in (4,666 mm) to 183.7 in (4,667 mm). Its size means a full wrap uses about 62 ft (19 m) of 60-inch cast film, while chrome or patterned film needs about 70 ft (21.5 m). The body has a tailgate with the rear glass in it, so the film ends at the edge of the glass. The number of panels is typical for a compact SUV, with four doors, a hood, roof, and tailgate.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an Envision

An Envision partial wrap can cover the roof, hood, and mirror caps to change the look without a full wrap. The Envision chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less film and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Buick Envision: body, cut-outs and film

The Buick Envision vinyl wrap is a straightforward job on a five-door SUV body with standard panel sizes. The second generation is a compact SUV with a tailgate that includes the rear glass, so film ends at the edge of the glass. The first generation has a length of 183.7 in (4,666 mm) to 183.7 in (4,667 mm), which is typical for its class. Because it is a four-door SUV with a large tailgate, the number of panels is moderate and the roof is accessible.

For Envision wrap ideas, remember that the tailgate has the rear glass in it, so the film must stop cleanly at the glass edge. Door handles, mirrors, and badges can be removed or wrapped separately to keep edges tight. The front and rear bumpers have complex curves, especially after the 2024 restyling. On any Envision, the roof rails and antenna base require careful trimming.

When you figure out how much vinyl to wrap an Envision, the generation matters only slightly. The first generation, sold from 2014 to 2020, is about 183.7 in (4,666 mm) long. The second generation is similar in size, but the 2024 restyling changed the bumpers and lights. A full wrap of either generation uses about 62 ft (19 m) of 60-inch cast film.

Questions about wrapping a Buick Envision

How much vinyl does it take to wrap a Buick Envision?

Yes, a full wrap of a Buick Envision takes about 62 ft (19 m) of 60-inch (1.52 m) cast film for the newest second-generation body. That amount is based on the size of the five-door SUV body with its large tailgate. If you choose chrome or patterned film on a first-generation Envision, the estimate is about 70 ft (21.5 m).

Which years of the Envision take the same film cuts?

The second generation Buick Envision from 2020 to 2023 uses one set of film cuts, and the 2024 restyling requires different cuts. The first generation had a restyling in 2017, but the film cuts stayed the same because only the front and rear fascias changed slightly. So the years that take the same film cuts are 2014–2020 for the first generation, 2020–2023 for the pre-restyling second generation, and 2024–now for the post-restyling second generation.

Can I wrap only the hood or the roof of an Envision?

Yes, you can wrap only the hood or the roof of an Envision as a partial wrap. That job can also include the mirror caps for a coordinated look. These smaller areas use much less film than a full wrap and can be done separately.

Is an Envision hard to wrap?

An Envision is not especially hard to wrap, but a few details add work. The tailgate has the rear glass in it, so you must cut the film precisely at the edge of the glass. The bumpers have complex curves, especially on the 2024 restyling with its new lights. The size of the SUV means a full wrap is a multi-day job for one installer.