Wraps by car

Buick Park Avenue wrap

This page covers the Buick Park Avenue wrap in detail for all three generations, from 1991 to 2012. A full vinyl wrap on the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. The Park Avenue is a full-size sedan with four doors in every generation.

3generations19 mof film for a full wrap

Buick Park Avenue, third generation, factory photo
Buick Park Avenue, third generation. Factory color shown.

Buick Park Avenue wrap colors and ideas

  • Park Avenue black wrap
  • Park Avenue white wrap
  • Park Avenue gray wrap
  • Park Avenue silver wrap
  • Park Avenue red wrap
  • Park Avenue blue wrap
  • Park Avenue green wrap
  • Park Avenue yellow wrap
  • Park Avenue orange wrap
  • Park Avenue purple wrap
  • Park Avenue pink wrap
  • Park Avenue teal wrap
  • Park Avenue brown wrap
  • Park Avenue gold wrap
  • Park Avenue chrome wrap
  • Park Avenue color shift wrap
  • Park Avenue carbon fiber wrap
  • Park Avenue camo and patterned wrap

How much vinyl to wrap a Buick Park Avenue

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2012sedan (4 doors)203.7 in (5,175 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
1996–2005sedan (4 doors)205.5 in (5,220 mm) to 206.8 in (5,253 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
1991–1996sedan (4 doors)205.2 in (5,212 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Park Avenue wrap cost factors

The Park Avenue wrap cost depends on the size of the car, the film you choose, and the condition of the paint. The newest Park Avenue is 203.7 in (5,175 mm) long, so a full wrap uses about 62 ft (19 m) of film. A color change wrap costs more than a solid color because it needs more material and time. A chrome delete adds labor on the window trim and badges.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: sedan (4 doors).

Park Avenue wraps by generation

Swipe sideways. Tap a card for the full description.

Buick Park Avenue, third generation, factory photo
Factory color shown

2007–2012 Park Avenue sedan (third generation)

2007–2012sedan (4 doors)203.7 in (5,175 mm)

The third generation Buick Park Avenue, built from 2007 to 2012, is a full-size sedan with a length of 203.7 in (5,175 mm). On a car of these years panels may be original or repainted. A test spot comes before a full wrap to check how the film sticks to the paint.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Buick Park Avenue, second generation, factory photo
Factory color shown

1996–2005 Park Avenue sedan (second generation)

1996–2005sedan (4 doors)205.5 in (5,220 mm) to 206.8 in (5,253 mm)

The second generation Buick Park Avenue ran from 1996 to 2005 with a restyling in 2002. Bumpers and lights changed with that restyling, so film cut for one version does not fit the other. It is 205.5 in (5,220 mm) to 206.8 in (5,253 mm) long.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Buick Park Avenue, first generation, factory photo
Factory color shown

1991–1996 Park Avenue sedan (first generation)

1991–1996sedan (4 doors)205.2 in (5,212 mm)

The first generation Buick Park Avenue, produced from 1991 to 1996, is a full-size sedan at 205.2 in (5,212 mm) in length. Its size and body style mean a full wrap uses about 57 ft (17.5 m) of 60-inch (1.52 m) film. The four doors and long roof add panels compared to a smaller sedan.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Park Avenue

A partial wrap on the roof, hood, or mirror caps protects key areas at a lower material use. Chrome delete on this car covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Buick Park Avenue: body, cut-outs and film

The Buick Park Avenue vinyl wrap is a large job because every version is a full-size four-door sedan. The third generation is 203.7 in (5,175 mm) long, the second runs from 205.5 in (5,220 mm) to 206.8 in (5,253 mm), and the first is 205.2 in (5,212 mm). A long sedan means long roof and quarter panels, so installers plan the film layout carefully.

Park Avenue wrap ideas work best when you plan around the body details of this car. The door handles, mirrors, and trim pieces come off for a clean installation. The front and rear bumpers need relief cuts around fog lights and parking sensors where fitted.

If you want to know how much vinyl to wrap a Park Avenue, the amount changes by generation. The second generation takes about 64 ft (19.5 m) because it is the longest. The first generation takes about 57 ft (17.5 m), and the third takes about 62 ft (19 m).

Questions about wrapping a Buick Park Avenue

How much vinyl does it take to wrap a Buick Park Avenue?

It takes about 62 ft (19 m) of 60-inch (1.52 m) vinyl to wrap a Buick Park Avenue of the newest body. This figure is for a full wrap with cast film. Chrome or patterned film increases the amount to about 72 ft (22 m).

Can I wrap only the hood or the roof of a Park Avenue?

Yes, you can wrap only the hood or the roof of a Park Avenue. Partial wrap options include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges. Paint protection film (PPF) is also available for the front end.

Is a Park Avenue hard to wrap?

It is not unusually hard, but the Park Avenue adds work because of its size. At 203.7 in (5,175 mm) long, the third generation has long roof and quarter panels. The door handles, mirrors, and trim pieces come off for a clean installation. The front and rear bumpers need relief cuts around fog lights and parking sensors where fitted.

How many generations of the Park Avenue does this page cover?

This page covers all three generations of the Buick Park Avenue. The first generation spans 1991 to 1996, the second spans 1996 to 2005, and the third spans 2007 to 2012.