Wraps by car

Buick Rainer wrap

The Buick Rainer wrap page covers the 2003–2007 SUV in full. This catalog has one generation of the Rainer. A complete vinyl wrap of this body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 82 ft (25 m).

1generations20 mof film for a full wrap

Buick Rainer, first generation, factory photo
Buick Rainer, first generation. Factory color shown.

Buick Rainer wrap colors and ideas

  • Rainer black wrap
  • Rainer white wrap
  • Rainer gray wrap
  • Rainer silver wrap
  • Rainer red wrap
  • Rainer blue wrap
  • Rainer green wrap
  • Rainer yellow wrap
  • Rainer orange wrap
  • Rainer purple wrap
  • Rainer pink wrap
  • Rainer teal wrap
  • Rainer brown wrap
  • Rainer gold wrap
  • Rainer chrome wrap
  • Rainer color shift wrap
  • Rainer carbon fiber wrap
  • Rainer camo and patterned wrap

How much vinyl to wrap a Buick Rainer

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2007SUV (5 doors)191.8 in (4,871 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Rainer wrap cost factors

Rainer wrap cost depends on the size of the body and the film type you pick. The full wrap estimate is about 66 ft (20 m) of cast film, or about 82 ft (25 m) for chrome or patterned film. The tall roof and the tailgate add labour time compared with a lower SUV. A partial job uses less film and less time.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (74.6 in (1,895 mm)): the roof is wrapped from a platform.

Rainer wraps by generation

Swipe sideways. Tap a card for the full description.

Buick Rainer, first generation, factory photo
Factory color shown

2003–2007 Rainer SUV (first generation)

2003–2007SUV (5 doors)191.8 in (4,871 mm)

The first generation Rainer (2003–2007) is a tall SUV, so the roof is wrapped from a platform. That work takes more time than wrapping lower panels. The body is 74.6 in (1,895 mm) tall, which is above average for a five-door SUV. Film on the roof is safe to install only with a proper platform.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (74.6 in (1,895 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Rainer

Rainer chrome delete covers window trim and badges with black film. A partial wrap can cover the roof, hood, or mirror caps alone. Paint protection film is another option: clear film on the front end to shield the nose. Each job uses less material than a full wrap of this SUV.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Buick Rainer: body, cut-outs and film

A Buick Rainer vinyl wrap has to cover a tall five-door SUV body with a tailgate. The body is 191.8 in (4,871 mm) long, so installers work panel by panel. The roof sits high and needs a platform to reach it safely. Tall sides mean more film area than a lower wagon of the same length.

Rainer wrap ideas work with the tailgate and the bright trim this SUV came with. The rear glass is set into the tailgate, so the film ends at the edge of the glass. Door handles, badges, and window trim are removed or cut around for a clean install. A chrome delete covers the bright trim with black film if you prefer that look.

To work out how much vinyl to wrap a Rainer, count only one generation from 2003 to 2007. Film needs stay the same for every trim of that generation. A full wrap of the body uses the figures in the film estimate on this page. The roof adds area beyond a simple sedan estimate because this SUV is tall.

Questions about wrapping a Buick Rainer

How much vinyl does it take to wrap a Buick Rainer?

A full wrap of a Buick Rainer takes about 66 ft (20 m) of 60-inch (1.52 m) cast vinyl. If you choose chrome or patterned film, plan for about 82 ft (25 m). The tall five-door body accounts for that total. These figures cover the 2003–2007 generation in this catalog.

Can I wrap only the hood or the roof of a Rainer?

Yes, you can wrap only the hood or the roof of a Rainer. The partial job list on this page includes the roof and the hood among its options. Mirror caps are also covered as a smaller job. Paint protection film on the front end is a further choice.

Is a Rainer hard to wrap?

A Rainer is not especially hard, but its height and tailgate add work. The roof sits at 74.6 in (1,895 mm), so it needs a platform to wrap safely. The tailgate includes the rear glass, so film must be trimmed to the edge of that glass. These points make the job take longer than on a lower car.

How many generations of the Rainer does this page cover?

This page covers one generation of the Buick Rainer. The catalog includes only the first generation, built from 2003 to 2007. All facts and film figures refer to that generation. No other generation of the Rainer exists.