Wraps by car

Buick LeSabre wrap

The Buick LeSabre wrap page covers the 2000–2005 eighth generation full-size sedan. Buick built this car across eight generations, and a full vinyl wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. A chrome or patterned film for the same car uses about 72 ft (22 m).

8generations19 mof film for a full wrap

Buick LeSabre, eighth generation, factory photo
Buick LeSabre, eighth generation. Factory color shown.

Buick LeSabre wrap colors and ideas

  • LeSabre black wrap
  • LeSabre white wrap
  • LeSabre gray wrap
  • LeSabre silver wrap
  • LeSabre red wrap
  • LeSabre blue wrap
  • LeSabre green wrap
  • LeSabre yellow wrap
  • LeSabre orange wrap
  • LeSabre purple wrap
  • LeSabre pink wrap
  • LeSabre teal wrap
  • LeSabre brown wrap
  • LeSabre gold wrap
  • LeSabre chrome wrap
  • LeSabre color shift wrap
  • LeSabre carbon fiber wrap
  • LeSabre camo and patterned wrap

How much vinyl to wrap a Buick LeSabre

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2000–2005sedan (4 doors)200.0 in (5,080 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
1992–1999sedan (4 doors)200.0 in (5,080 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1986–1991sedan (4 doors)196.5 in (4,991 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
1977–1985sedan (4 doors)226.8 in (5,761 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
1971–1976convertible, sedan (2 or 4 doors)——
1965–1970convertible, sedan (2 or 4 doors)——
1961–1964convertible, sedan (2 or 4 doors)213.2 in (5,415 mm) to 214.1 in (5,438 mm)about 57 ft (17.5 m) for the convertible to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)
1959–1960convertible, sedan (2 or 4 doors)217.4 in (5,522 mm)about 57 ft (17.5 m) for the convertible to 69 ft (21 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m)

LeSabre wrap cost factors

LeSabre wrap cost depends on the size of the car, the film quality, and how many panels are covered. A full wrap of the 200.0 in (5,080 mm) eighth generation uses about 62 ft (19 m) of film, so a chrome film that needs 72 ft (22 m) will cost more in material. The installer's time also changes with the amount of trim removal.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: sedan (4 doors).

LeSabre wraps by generation

Swipe sideways. Tap a card for the full description.

Buick LeSabre, eighth generation, factory photo
Factory color shown

2000–2005 LeSabre sedan (eighth generation)

2000–2005sedan (4 doors)200.0 in (5,080 mm)

The eighth generation Buick LeSabre from 2000–2005 is a full-size sedan with a 200.0 in (5,080 mm) body. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The film should be checked on each panel to ensure it will not peel old paint when removed.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Buick LeSabre, seventh generation, factory photo
Factory color shown

1992–1999 LeSabre sedan (seventh generation)

1992–1999sedan (4 doors)200.0 in (5,080 mm)

The seventh generation Buick LeSabre from 1992–1999 is a full-size sedan with a body length of 200.0 in (5,080 mm). This size means a full wrap takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. The four-door body has large flat panels that are easy to wrap in one piece each.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Buick LeSabre, sixth generation, factory photo
Factory color shown

1986–1991 LeSabre sedan (sixth generation)

1986–1991sedan (4 doors)196.5 in (4,991 mm)

The sixth generation Buick LeSabre from 1986–1991 is a full-size sedan with a body length of 196.5 in (4,991 mm). Its slightly shorter body means a full wrap takes about 56 ft (17 m) of film. The wrap installer can cover the hood, roof, and trunk with single sheets for a smooth finish.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Buick LeSabre, fifth generation, factory photo
Factory color shown

1977–1985 LeSabre sedan (fifth generation)

1977–1985sedan (4 doors)226.8 in (5,761 mm)

The fifth generation Buick LeSabre from 1977–1985 is a full-size sedan with a body length of 226.8 in (5,761 mm). This is the longest LeSabre body, so a full wrap takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. The large rear quarter panels and long roof require careful measuring to avoid seams.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Buick LeSabre, fourth generation, factory photo
Factory color shown

1971–1976 LeSabre convertible, sedan (fourth generation)

1971–1976convertible, sedan (2 or 4 doors)

The fourth generation Buick LeSabre from 1971–1976 came as a convertible or a sedan with two or four doors. For the convertible body, the fabric top is not wrapped and the film ends where it begins. If the car has a folding hard top, that top is wrapped as panels of its own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Buick LeSabre, third generation, factory photo
Factory color shown

1965–1970 LeSabre convertible, sedan (third generation)

1965–1970convertible, sedan (2 or 4 doors)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Buick LeSabre, second generation, factory photo
Factory color shown

1961–1964 LeSabre convertible, sedan (second generation)

1961–1964convertible, sedan (2 or 4 doors)213.2 in (5,415 mm) to 214.1 in (5,438 mm)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 57 ft (17.5 m) for the convertible to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Buick LeSabre, first generation, factory photo
Factory color shown

1959–1960 LeSabre convertible, sedan (first generation)

1959–1960convertible, sedan (2 or 4 doors)217.4 in (5,522 mm)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 57 ft (17.5 m) for the convertible to 69 ft (21 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on a LeSabre

LeSabre chrome delete covers the window trim and badges with black film. A partial wrap can also be done on the roof, hood, or mirror caps. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Buick LeSabre: body, cut-outs and film

A Buick LeSabre vinyl wrap has to cover a large four-door sedan body with a length of 200.0 in (5,080 mm) on the latest generation. The long roof, hood, and trunk panels mean a full wrap uses more film than a compact car. Installers usually cut the film into sections for each panel, which also makes handling easier.

LeSabre wrap ideas include a full color change, a two-tone scheme, or a satin finish over the original paint. The door handles, mirrors, and badges should be removed or wrapped separately for a clean result. The window trim and grille can be covered for a chrome delete, but those areas need careful knifeless tape work.

How much vinyl to wrap a LeSabre depends on the generation, because the body length changed over the years. The eighth generation needs about 62 ft (19 m) of film, while the fifth generation, at 226.8 in (5,761 mm), needs about 64 ft (19.5 m). The seventh and sixth generations are shorter and use about 56 ft (17 m) of the same width film.

Questions about wrapping a Buick LeSabre

How much vinyl does it take to wrap a Buick LeSabre?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap a 2000–2005 Buick LeSabre. A chrome or patterned film for the same car takes about 72 ft (22 m). The exact amount depends on the installer's cutting layout.

Can I wrap only the hood or the roof of a LeSabre?

Yes, a partial wrap of the hood or roof is possible on a LeSabre. You can also wrap only the mirror caps, do a chrome delete on the window trim and badges, or add clear paint protection film to the front end.

Is a LeSabre hard to wrap?

A LeSabre is not especially hard to wrap, but its large size adds work and film. The convertible body of the 1971–1976 generation needs extra care because the fabric top is not wrapped. Removing the door handles and mirrors also takes time.

How many generations of the LeSabre does this page cover?

This page covers eight generations of the Buick LeSabre. The details are given for the fifth through eighth generations, which spanned 1977 to 2005. For the earlier generations, the information may differ.