Wraps by car

Buick Encore GX wrap

A Buick Encore GX wrap covers the whole five-door SUV with cast vinyl film. The first generation runs from 2019 to now and had a restyling in 2023. Wrapping the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film.

1generations18 mof film for a full wrap

Buick Encore GX, first generation, factory photo
Buick Encore GX, first generation. Factory color shown.

Buick Encore GX wrap colors and ideas

  • Encore GX black wrap
  • Encore GX white wrap
  • Encore GX gray wrap
  • Encore GX silver wrap
  • Encore GX red wrap
  • Encore GX blue wrap
  • Encore GX green wrap
  • Encore GX yellow wrap
  • Encore GX orange wrap
  • Encore GX purple wrap
  • Encore GX pink wrap
  • Encore GX teal wrap
  • Encore GX brown wrap
  • Encore GX gold wrap
  • Encore GX chrome wrap
  • Encore GX color shift wrap
  • Encore GX carbon fiber wrap
  • Encore GX camo and patterned wrap

How much vinyl to wrap a Buick Encore GX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowSUV (5 doors)175.7 in (4,463 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Encore GX wrap cost factors

Encore GX wrap cost depends on the film type, the amount of film, and the labor for the body size. A full color change uses about 59 ft (18 m) of 60-inch cast film, while chrome or patterned film uses about 67 ft (20.5 m). The restyling year 2023 changes the bumper shapes, so a car with the new design needs fewer modifications. The tailgate glass is trimmed close to the edge, which adds careful hand work.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2023: bumpers and lights differ between the versions, and so do the film cuts.

Encore GX wraps by generation

Swipe sideways. Tap a card for the full description.

Buick Encore GX, first generation, factory photo
Factory color shown

2019–now Encore GX SUV (first generation)

2019–nowSUV (5 doors)175.7 in (4,463 mm)

The first generation of the Buick Encore GX was introduced in 2019 and is still in production. It was restyled in 2023 with new bumpers and lights. Film cut for the original version does not fit the restyled version, so you must order the correct pattern for the production year. The overall length stayed at 175.7 in (4,463 mm), so the total film amount is unchanged.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on an Encore GX

For an Encore GX chrome delete, the bright window trim and badges are covered with black film. A partial wrap can cover the roof, hood and mirror caps without doing the whole SUV. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film and leave the rest of the body in its original color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Buick Encore GX: body, cut-outs and film

A Buick Encore GX vinyl wrap needs about 59 ft (18 m) of 60-inch (1.52 m) film. The SUV is 175.7 in (4,463 mm) long, so a standard 60-inch roll works without extra seams. The five-door body means four passenger doors and a tailgate get film. The rear glass sits in the tailgate, so the film stops at the glass edge.

Encore GX wrap ideas include a full color change, a two-tone roof and hood, or clear paint protection film (PPF) on the front end. The tailgate holds the rear glass, so the film edge follows the glass profile. Door handles, mirror caps and badges come off for a clean install. The roof rails stay in place unless you remove them for a seamless roof film.

How much vinyl to wrap an Encore GX depends on the production year and the film type. All first-generation bodies from 2019 to now have the same size and five-door shape. The 2023 restyling changed the bumpers and lights, so film kits for older cars do not match the newer ones. A plain color needs about 59 ft (18 m) of film, while chrome or patterned film needs about 67 ft (20.5 m).

Questions about wrapping a Buick Encore GX

How much vinyl does it take to wrap a Buick Encore GX?

A Buick Encore GX takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap in a solid color. If you choose chrome or patterned film, plan on about 67 ft (20.5 m) to allow for matching the pattern. This estimate is for the newest body without the roof rails removed.

Which years of the Encore GX take the same film cuts?

The years of the Encore GX that take the same film cuts are 2019 through 2022 for the original design and 2023 through now for the restyled design. The 2023 restyling changed the bumper and light shapes, so a kit for the earlier look does not fit the updated body. All years share the same overall length and five-door layout.

Can I wrap only the hood or the roof of an Encore GX?

Yes, you can wrap only the hood or the roof of an Encore GX. A partial wrap often includes the roof, hood and mirror caps, or just one panel. These jobs use less film and cost less than a full wrap. They let you change the look without covering the whole SUV.

Is an Encore GX hard to wrap?

The Encore GX is not the hardest SUV to wrap, but the tailgate glass adds work. The rear glass sits flush in the tailgate, so the film edge must follow the glass line carefully. At 175.7 in (4,463 mm) long, the body has large flat panels that are quick to cover. The door handles and badges come off easily, which speeds up the job.