Wraps by car

Buick Encore wrap

The Buick Encore wrap page covers the first generation of this subcompact SUV, produced from 2012 to 2019. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film jobs use about 66 ft (20 m).

1generations17.5 mof film for a full wrap

Buick Encore, first generation, factory photo
Buick Encore, first generation. Factory color shown.

Buick Encore wrap colors and ideas

  • Encore black wrap
  • Encore white wrap
  • Encore gray wrap
  • Encore silver wrap
  • Encore red wrap
  • Encore blue wrap
  • Encore green wrap
  • Encore yellow wrap
  • Encore orange wrap
  • Encore purple wrap
  • Encore pink wrap
  • Encore teal wrap
  • Encore brown wrap
  • Encore gold wrap
  • Encore chrome wrap
  • Encore color shift wrap
  • Encore carbon fiber wrap
  • Encore camo and patterned wrap

How much vinyl to wrap a Buick Encore

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2019SUV (5 doors)168.4 in (4,277 mm) to 168.4 in (4,278 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Encore wrap cost factors

Encore wrap cost depends on the film type and the size of the job. A full wrap of the Encore uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. A chrome delete or partial wrap uses less material but still requires careful trimming around the tailgate glass.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2016: bumpers and lights differ between the versions, and so do the film cuts.

Encore wraps by generation

Swipe sideways. Tap a card for the full description.

Buick Encore, first generation, factory photo
Factory color shown

2012–2019 Encore SUV (first generation)

2012–2019SUV (5 doors)168.4 in (4,277 mm) to 168.4 in (4,278 mm)

The first generation Buick Encore was made from 2012 to 2019. The 2016 restyling changed the bumpers and lights, so film cut for one version does not fit the other. Installers should check the production year before cutting film for this generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on an Encore

Partial wrap options for the Encore include the roof, hood, and mirror caps. Encore chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied to the front end as a clear protective layer.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Buick Encore: body, cut-outs and film

The Buick Encore vinyl wrap is fitted to a five-door SUV body that measures 168.4 in (4,277 mm) to 168.4 in (4,278 mm) long. The tall roof and short overhangs keep the main panels compact for an SUV. The tailgate includes the rear glass, so film stops at the glass edge.

Encore wrap ideas begin with the tailgate, where the rear glass sits inside the panel. The film ends at the edge of that glass, so the installer trims around it rather than wrapping over it. The roof rails and antenna may need removal for a clean finish.

How much vinyl to wrap an Encore depends on the version you own. The first generation ran from 2012 to 2019, and the 2016 restyling changed the bumpers and lights. Film cut for an earlier Encore does not fit a later one, so order film for your exact year.

Questions about wrapping a Buick Encore

How much vinyl does it take to wrap a Buick Encore?

The Buick Encore takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film uses about 66 ft (20 m). These figures are for the first generation body produced from 2012 to 2019.

Which years of the Encore take the same film cuts?

The 2012–2015 Encore models take the same film cuts, and the 2016–2019 models take their own cuts. The 2016 restyling changed the bumpers and lights, so film from an earlier Encore does not fit a later one.

Can I wrap only the hood or the roof of an Encore?

Yes, you can wrap only the hood or the roof of an Encore. Partial wrap options include the roof, hood, and mirror caps. A hood wrap is a smaller job than a full wrap and uses less film.

Is an Encore hard to wrap?

An Encore is not hard to wrap, but the tailgate adds work because the rear glass sits inside it. The film ends at the edge of that glass, so the installer trims around it. The body is short at 168.4 in (4,277 mm) to 168.4 in (4,278 mm), which keeps panels manageable.