Wraps by car

Buick GL8 wrap

The Buick GL8 wrap page covers all three generations of this Buick minivan, from the 2000–2016 first generation through the 2017–now third generation. A full vinyl wrap of the newest body takes about 76 ft (23 m) of 60-inch (1.52 m) cast film. This page explains what a wrap involves, what affects the work, and which materials fit the job.

3generations23 mof film for a full wrap

Buick GL8, third generation, factory photo
Buick GL8, third generation. Factory color shown.

Buick GL8 wrap colors and ideas

  • Buick GL8 black wrap
  • Buick GL8 white wrap
  • Buick GL8 gray wrap
  • Buick GL8 silver wrap
  • Buick GL8 red wrap
  • Buick GL8 blue wrap
  • Buick GL8 green wrap
  • Buick GL8 yellow wrap
  • Buick GL8 orange wrap
  • Buick GL8 purple wrap
  • Buick GL8 pink wrap
  • Buick GL8 teal wrap
  • Buick GL8 brown wrap
  • Buick GL8 gold wrap
  • Buick GL8 chrome wrap
  • Buick GL8 color shift wrap
  • Buick GL8 carbon fiber wrap
  • Buick GL8 camo and patterned wrap

How much vinyl to wrap a Buick GL8

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowvan (5 doors)204.8 in (5,203 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 89 ft (27 m)
2010–2017van (5 doors)205.2 in (5,213 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)
2000–2016van (5 doors)201.4 in (5,115 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)

Buick GL8 wrap cost factors

Buick GL8 wrap cost depends on the film chosen, the condition of the paint, and the size of the van, which ranges from 201.4 in (5,115 mm) to 205.2 in (5,213 mm). A full wrap of the third generation needs about 76 ft (23 m) of cast film, while chrome or patterned film needs about 89 ft (27 m). The sliding side doors and the tall roof add labor, especially when the roof must be wrapped from a platform.

  • Film for a full wrap: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 89 ft (27 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (71.1 in (1,805 mm)): the roof is wrapped from a platform.

Buick GL8 wraps by generation

Swipe sideways. Tap a card for the full description.

Buick GL8, third generation, factory photo
Factory color shown

2017–now Buick GL8 van (third generation)

2017–nowvan (5 doors)204.8 in (5,203 mm)

The sliding side doors of the third generation Buick GL8 leave their tracks bare, and the film is cut along them. This means the wrap follows the track line exactly, and the installer does not cover the moving parts. The 2017–now model is 204.8 in (5,203 mm) long and stands 71.1 in (1,805 mm) tall, which makes the roof wrap a platform job.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (71.1 in (1,805 mm)): the roof is wrapped from a platform.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 89 ft (27 m).

Buick GL8, second generation, factory photo
Factory color shown

2010–2017 Buick GL8 van (second generation)

2010–2017van (5 doors)205.2 in (5,213 mm)

The height of the body on the second generation Buick GL8 means the roof is wrapped from a platform and takes more time. At 68.9 in (1,750 mm) tall, this 2010–2017 van still needs careful positioning to avoid stretching the film on the upper panels. The sliding door tracks stay bare, and the film is cut along them as on the other generations.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Buick GL8, first generation, factory photo
Factory color shown

2000–2016 Buick GL8 van (first generation)

2000–2016van (5 doors)201.4 in (5,115 mm)

Paint age on the first generation Buick GL8 matters because a 2000–2016 van may have original or repainted panels. A test spot on the paint comes before a full wrap to check that the film will adhere without lifting. This generation is 201.4 in (5,115 mm) long and takes about 76 ft (23 m) of cast film for a standard wrap.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Roof, hood, chrome delete and PPF on a Buick GL8

A Buick GL8 chrome delete covers the window trim and badges with black film, and it suits any generation. A partial wrap on this van often means the roof, hood, or mirror caps, which changes the look without wrapping the whole body. For front-end protection, paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less material than a full wrap and can be planned around the sliding door tracks.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Buick GL8: body, cut-outs and film

The Buick GL8 vinyl wrap is shaped by the van's consistent five-door body and its length, which ranges from 201.4 in (5,115 mm) to 205.2 in (5,213 mm) across generations. The tall body means the roof is wrapped from a platform on the 2010–2017 second generation and the 2017–now third generation. Sliding side doors on every Buick GL8 leave the door tracks bare, and the film is cut along them. This body style keeps the wrap estimate at about 76 ft (23 m) of 60-inch (1.52 m) cast film for a standard color change.

Buick GL8 wrap ideas often start with the sliding door tracks, which stay bare on every generation and decide where the film is cut. The tall body, up to 71.1 in (1,805 mm) on the third generation, means a roof wrap requires a platform and extra care. Cut-outs include the door handles, badges, and the area around the sliding door tracks, and some trims may need these parts removed for clean edges. A chrome delete on the window trim and badges is a way to change the look without a full wrap.

How much vinyl to wrap a Buick GL8 depends mainly on the generation, but the difference is small: all three generations take about 76 ft (23 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds waste, so the estimate is about 89 ft (27 m) on the third generation and about 87 ft (26.5 m) on the first two generations. The first generation is slightly shorter at 201.4 in (5,115 mm), while the second generation is the longest at 205.2 in (5,213 mm).

Questions about wrapping a Buick GL8

How much vinyl does it take to wrap a Buick GL8?

A Buick GL8 full wrap takes about 76 ft (23 m) of 60-inch (1.52 m) cast film on the newest body. This figure covers a standard color change wrap, while chrome or patterned film may need about 89 ft (27 m) because of pattern matching and extra waste. The actual amount can vary slightly with the installer's cutting method.

Are the sliding doors of a Buick GL8 wrapped?

The sliding doors of a Buick GL8 are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can still open and close smoothly. This detail is part of every generation's wrap plan, from the first to the third generation.

Can I wrap only the hood or the roof of a Buick GL8?

Yes, you can wrap only the hood or the roof of a Buick GL8, and a partial wrap often includes the hood, roof, or mirror caps. A roof wrap on the second and third generations is done from a platform because the van is tall. A chrome delete of the window trim and badges is another partial option.

Is a Buick GL8 hard to wrap?

The Buick GL8 is not especially hard to wrap, but a few things add work, such as the sliding side doors with bare tracks and the tall body. On the 2010–2017 and 2017–now models, the roof must be wrapped from a platform because the body is up to 71.1 in (1,805 mm) tall. The long body, up to 205.2 in (5,213 mm), also means more material and careful panel alignment.