Wraps by car

Buick Skylark wrap

The Buick Skylark wrap page covers the seventh generation from 1992–1998 through the third generation from 1964–1972. The catalog lists five of the seven generations as having vinyl wrap guides. A full wrap of the newest coupe takes about 51 ft (15.5 m) of 60-inch cast film, while the sedan takes about 52 ft (16 m).

7generations15.5 mof film for a full wrap

Buick Skylark, seventh generation, factory photo
Buick Skylark, seventh generation. Factory color shown.

Buick Skylark wrap colors and ideas

  • Skylark black wrap
  • Skylark white wrap
  • Skylark gray wrap
  • Skylark silver wrap
  • Skylark red wrap
  • Skylark blue wrap
  • Skylark green wrap
  • Skylark yellow wrap
  • Skylark orange wrap
  • Skylark purple wrap
  • Skylark pink wrap
  • Skylark teal wrap
  • Skylark brown wrap
  • Skylark gold wrap
  • Skylark chrome wrap
  • Skylark color shift wrap
  • Skylark carbon fiber wrap
  • Skylark camo and patterned wrap

How much vinyl to wrap a Buick Skylark

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–1998coupe, sedan (2 or 4 doors)189.1 in (4,804 mm) to 189.2 in (4,805 mm)about 51 ft (15.5 m) for the coupe to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)
1986–1991coupe, sedan (2 or 4 doors)181.8 in (4,618 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1980–1985coupe, sedan (2 or 4 doors)——
1975–1979coupe, sedan (2 or 4 doors)——
1964–1972coupe, sedan (2 or 4 doors)——
1961–1963coupe (2 doors)——
1964–1954convertible (2 doors)——

Skylark wrap cost factors

Skylark wrap cost is set by the generation, the body style, and the film you pick. A 1992–1998 coupe needs about 51 ft (15.5 m) and a sedan about 52 ft (16 m), so the panel count and waste change the labor. The sixth generation from 1986–1991 is a shorter 181.8 in (4,618 mm) body that uses about 51 ft (15.5 m), but older paint may need more prep.

  • Film for a full wrap: about 51 ft (15.5 m) for the coupe to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: coupe, sedan (2 or 4 doors).

Skylark wraps by generation

Swipe sideways. Tap a card for the full description.

Buick Skylark, seventh generation, factory photo
Factory color shown

1992–1998 Skylark coupe, sedan (seventh generation)

1992–1998coupe, sedan (2 or 4 doors)189.1 in (4,804 mm) to 189.2 in (4,805 mm)

The seventh generation Buick Skylark from 1992–1998 came as a coupe and a sedan with two or four doors. The body style decides the panel plan and the film amount because the coupe has longer doors and the sedan has four door panels. A coupe wrap uses about 51 ft (15.5 m) of 60-inch cast film and a sedan about 52 ft (16 m) with the same 189.1–189.2 in length.

Film: about 51 ft (15.5 m) for the coupe to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Buick Skylark, sixth generation, factory photo
Factory color shown

1986–1991 Skylark coupe, sedan (sixth generation)

1986–1991coupe, sedan (2 or 4 doors)181.8 in (4,618 mm)

The sixth generation Buick Skylark from 1986–1991 is a mid-size coupe and sedan that is 181.8 in (4,618 mm) long. Paint age matters on a car of these years because the panels may be original or repainted, and a test spot comes before a full wrap. This generation needs about 51 ft (15.5 m) of 60-inch cast film for a solid color wrap.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Buick Skylark, fifth generation, factory photo
Factory color shown

1980–1985 Skylark coupe, sedan (fifth generation)

1980–1985coupe, sedan (2 or 4 doors)

The fifth generation Buick Skylark from 1980–1985 is a mid-size coupe and sedan with two or four doors. The size and body style set the amount of film and the number of panels because the sedan adds two door panels compared to the coupe. Even without a film estimate in the data, the mid-size body means a wrap is planned like other cars of this class.

Buick Skylark, fourth generation, factory photo
Factory color shown

1975–1979 Skylark coupe, sedan (fourth generation)

1975–1979coupe, sedan (2 or 4 doors)

The fourth generation Buick Skylark from 1975–1979 is a mid-size coupe and sedan. The size and body style determine how much film is needed and how many panels you must wrap. A sedan has four doors and more small trim pieces than a coupe, so the installer will cut the film around more edges.

Buick Skylark, third generation, factory photo
Factory color shown

1964–1972 Skylark coupe, sedan (third generation)

1964–1972coupe, sedan (2 or 4 doors)

The third generation Buick Skylark from 1964–1972 is a mid-size coupe and sedan with two or four doors. The size and body style of this car affect the amount of film and the number of panels you plan for. Early cars of this generation have different bumper and trim shapes, so the installer checks the exact body before cutting.

Buick Skylark, second generation, factory photo
Factory color shown

1961–1963 Skylark coupe (second generation)

1961–1963coupe (2 doors)

Two long side doors: each door is one large piece of film.

Buick Skylark, first generation, factory photo
Factory color shown

1964–1954 Skylark convertible (first generation)

1964–1954convertible (2 doors)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Roof, hood, chrome delete and PPF on a Skylark

A partial wrap on a Buick Skylark can cover the roof, hood, or mirror caps. A Skylark chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film on the front end that guards the hood, fenders, and bumper from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Buick Skylark: body, cut-outs and film

A Buick Skylark vinyl wrap is planned around the body style because the coupe and sedan share the same 189.1 in (4,804 mm) to 189.2 in (4,805 mm) length. The mid-size body has two or four doors, which changes the number of door panels and the trimming around the glass. The coupe needs about 51 ft (15.5 m) of 60-inch film and the sedan about 52 ft (16 m) when you follow a standard panel plan.

Skylark wrap ideas need to account for the badges, door handles, mirrors, and antenna. These small parts are removed or have the film cut around them so the vinyl sits flat. The trim around the windows is also a natural line for a contrast color or a chrome delete, where bright trim is covered with black film.

How much vinyl to wrap a Skylark depends on the generation because the body lengths changed over the years. The 1992–1998 model is 189.1 in (4,804 mm) to 189.2 in (4,805 mm) and the 1986–1991 model is 181.8 in (4,618 mm), so the older body uses slightly less film. A chrome or patterned film can add about 4 ft (1.2 m) to the estimate on the seventh generation.

Questions about wrapping a Buick Skylark

How much vinyl does it take to wrap a Buick Skylark?

A Buick Skylark wrap takes about 51 ft (15.5 m) for the coupe to 52 ft (16 m) for the sedan of the 1992–1998 body. The estimate uses 60-inch (1.52 m) cast film and covers all painted panels with normal waste. A chrome or patterned film can push the amount to about 66 ft (20 m) with matching patterns.

Which Skylark body takes more film?

The sedan takes more film than the coupe on the Buick Skylark. The 1992–1998 coupe needs about 51 ft (15.5 m) of 60-inch film while the sedan needs about 52 ft (16 m) because of the extra door panels.

Can I wrap only the hood or the roof of a Skylark?

Yes, you can wrap only the hood or the roof of a Skylark. A partial wrap on the roof or hood uses less film than a full color change wrap. Mirror caps are also a small job that adds a contrast accent.

Is a Skylark hard to wrap?

A Buick Skylark is not hard to wrap for an installer who knows mid-size coupes and sedans. The 189.1 in (4,804 mm) length and simple body lines keep the panels flat, but the door handles, badges, and antenna add cut-out work. Older generations may have aged paint that needs a test spot before the film goes on.