Wraps by car

Buick Electra wrap

The Buick Electra wrap page covers six generations of this full-size car. The newest body from 1985–1990 needs about 54 ft (16.5 m) of vinyl for the coupe and 56 ft (17 m) for the sedan. A full wrap uses 60-inch (1.52 m) cast film for the best fit on the long panels.

6generations16.5 mof film for a full wrap

Buick Electra, sixth generation, factory photo
Buick Electra, sixth generation. Factory color shown.

Buick Electra wrap colors and ideas

  • Electra black wrap
  • Electra white wrap
  • Electra gray wrap
  • Electra silver wrap
  • Electra red wrap
  • Electra blue wrap
  • Electra green wrap
  • Electra yellow wrap
  • Electra orange wrap
  • Electra purple wrap
  • Electra pink wrap
  • Electra teal wrap
  • Electra brown wrap
  • Electra gold wrap
  • Electra chrome wrap
  • Electra color shift wrap
  • Electra carbon fiber wrap
  • Electra camo and patterned wrap

How much vinyl to wrap a Buick Electra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1985–1990coupe, sedan (2 or 4 doors)196.4 in (4,989 mm)about 54 ft (16.5 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)
1977–1984coupe, sedan, wagon (2 or 4 doors)222.1 in (5,641 mm)about 61 ft (18.5 m) for the coupe to 69 ft (21 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 85 ft (26 m)
1971–1976coupe, sedan (2 or 4 doors)229.8 in (5,837 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
1965–1970convertible, coupe, sedan (2 or 4 doors)——
1961–1964convertible, coupe, sedan (2 or 4 doors)——
1959–1960convertible, sedan (2 or 4 doors)220.9 in (5,611 mm) to 225.4 in (5,725 mm)about 61 ft (18.5 m) for the convertible to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m)

Electra wrap cost factors

Electra wrap cost depends on the film amount, body style, and surface condition. The sixth generation uses about 54 ft (16.5 m) to 56 ft (17 m) for a full wrap, while the fifth generation wagon needs up to 69 ft (21 m). More film means more material cost and more labor hours. Paint condition also affects cost because old paint may need correction before the wrap.

  • Film for a full wrap: about 54 ft (16.5 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: coupe, sedan (2 or 4 doors).

Electra wraps by generation

Swipe sideways. Tap a card for the full description.

Buick Electra, sixth generation, factory photo
Factory color shown

1985–1990 Electra coupe, sedan (sixth generation)

1985–1990coupe, sedan (2 or 4 doors)196.4 in (4,989 mm)

The sixth generation Buick Electra from 1985–1990 comes as a coupe or a sedan. The coupe needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film and the sedan about 56 ft (17 m). A chrome or patterned film raises the amount to about 69 ft (21 m). The coupe has longer doors, so the panel plan differs slightly from the sedan.

Film: about 54 ft (16.5 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Buick Electra, fifth generation, factory photo
Factory color shown

1977–1984 Electra coupe, sedan, wagon (fifth generation)

1977–1984coupe, sedan, wagon (2 or 4 doors)222.1 in (5,641 mm)

The fifth generation Buick Electra produced from 1977–1984 has coupe, sedan, and wagon bodies. Paint age on a car of these years can vary, so always test a small spot first because the surface may be original or repainted. The film estimate is about 61 ft (18.5 m) for the coupe and up to 69 ft (21 m) for the wagon. A wagon with a rear glass tailgate still has a large roof and side area to cover.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 61 ft (18.5 m) for the coupe to 69 ft (21 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 85 ft (26 m).

Buick Electra, fourth generation, factory photo
Factory color shown

1971–1976 Electra coupe, sedan (fourth generation)

1971–1976coupe, sedan (2 or 4 doors)229.8 in (5,837 mm)

The fourth generation Buick Electra from 1971–1976 is a full-size coupe or sedan. At 229.8 in (5,837 mm) long, it needs about 62 ft (19 m) of 60-inch (1.52 m) cast film for a complete color change. Chrome or patterned film goes up to about 80 ft (24.5 m). Extra length means more panels and more seams, so plan the vinyl layout before cutting.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Buick Electra, third generation, factory photo
Factory color shown

1965–1970 Electra convertible, coupe, sedan (third generation)

1965–1970convertible, coupe, sedan (2 or 4 doors)

The third generation Buick Electra from 1965–1970 offers a convertible along with coupe and sedan styles. On a convertible, the fabric top is not wrapped and the film ends where the top begins. A folding hard top is wrapped as panels of its own, with each section cut to fit the moving parts. The installer must account for the top's operation when wrapping a convertible.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Buick Electra, second generation, factory photo
Factory color shown

1961–1964 Electra convertible, coupe, sedan (second generation)

1961–1964convertible, coupe, sedan (2 or 4 doors)

The second generation Buick Electra from 1961–1964 is a full-size car with convertible, coupe, and sedan bodies. Main panels are large and require careful film layout, with a similar amount of film to the third generation. The body style changes the number of panels: a convertible has no roof panel, but a coupe or sedan has a large roof. Measure each car individually because these older cars may have custom modifications.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Buick Electra, first generation, factory photo
Factory color shown

1959–1960 Electra convertible, sedan (first generation)

1959–1960convertible, sedan (2 or 4 doors)220.9 in (5,611 mm) to 225.4 in (5,725 mm)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 61 ft (18.5 m) for the convertible to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on an Electra

A partial wrap on a Buick Electra can cover just the roof, hood, or mirror caps. Electra chrome delete covers window trim and badges with black film for a darker look. Paint protection film (PPF) is clear film applied to the front end to guard against rock chips. These smaller jobs use less film than a full wrap and can be done on any generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Buick Electra: body, cut-outs and film

A Buick Electra vinyl wrap on a full-size car means large panels and more film than on a compact. The sixth generation is 196.4 in (4,989 mm) long with coupe and sedan styles. The fifth generation is 222.1 in (5,641 mm) long and adds a wagon body. These sizes require careful planning of seams on the roof and quarter panels.

Electra wrap ideas often start with cut-outs around door handles, badges, and trim. On the fifth generation wagon, a tailgate with the rear glass in it means the film ends at the edge of the glass. For a clean install, remove mirrors and door handles on every generation. Older cars may have trim that needs masking or removal before the film goes on.

How much vinyl to wrap an Electra depends on the generation and body style. The fourth generation from 1971–1976 is the longest at 229.8 in (5,837 mm) and needs about 62 ft (19 m) of film. A chrome delete or patterned film adds up to 80 ft (24.5 m) on the same car. Counting film accurately means measuring each panel and adding waste for trimming.

Questions about wrapping a Buick Electra

How much vinyl does it take to wrap a Buick Electra?

It takes about 54 ft (16.5 m) of vinyl to wrap a Buick Electra coupe from the sixth generation. The sedan of the same years uses about 56 ft (17 m). These figures are for 60-inch (1.52 m) cast film without chrome or patterns.

Which Electra body takes more film?

The wagon body of the fifth generation Buick Electra takes more film than the coupe or sedan. It needs about 69 ft (21 m) compared to 61 ft (18.5 m) for the coupe. The longer roof and extra rear panels on the wagon require that additional material.

Can I wrap only the hood or the roof of an Electra?

Yes, you can wrap only the hood or the roof of an Electra. A partial wrap can be as small as the mirror caps, or cover the roof and hood together. These smaller areas use less film and take less time than a full wrap.

Is an Electra hard to wrap?

The Buick Electra has some challenges that make it harder to wrap than a smaller car. Its length, from 196.4 in (4,989 mm) to 229.8 in (5,837 mm), means large panels that need careful handling. On wagons, the tailgate with rear glass adds extra cut work. Convertibles have a fabric top that must be avoided, and the film ends where the top begins.