Wraps by car

Buick Lucerne wrap

The Buick Lucerne wrap page covers the 2005–2011 first generation luxury sedan. A vinyl wrap on this car takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 72 ft (22 m).

1generations19 mof film for a full wrap

Buick Lucerne, first generation, factory photo
Buick Lucerne, first generation. Factory color shown.

Buick Lucerne wrap colors and ideas

  • Lucerne black wrap
  • Lucerne white wrap
  • Lucerne gray wrap
  • Lucerne silver wrap
  • Lucerne red wrap
  • Lucerne blue wrap
  • Lucerne green wrap
  • Lucerne yellow wrap
  • Lucerne orange wrap
  • Lucerne purple wrap
  • Lucerne pink wrap
  • Lucerne teal wrap
  • Lucerne brown wrap
  • Lucerne gold wrap
  • Lucerne chrome wrap
  • Lucerne color shift wrap
  • Lucerne carbon fiber wrap
  • Lucerne camo and patterned wrap

How much vinyl to wrap a Buick Lucerne

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2011sedan (4 doors)203.2 in (5,161 mm) to 204.0 in (5,182 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Lucerne wrap cost factors

Lucerne wrap cost depends on the amount of film, surface prep, and how many parts are removed. A full wrap takes about 62 ft (19 m) of 60-inch (1.52 m) cast film for the newest body. Chrome or patterned film needs about 72 ft (22 m). The restyled bumpers from 2009 add labor compared with earlier years.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: sedan (4 doors).
  • Restyled in 2009: bumpers and lights differ between the versions, and so do the film cuts.

Lucerne wraps by generation

Swipe sideways. Tap a card for the full description.

Buick Lucerne, first generation, factory photo
Factory color shown

2005–2011 Lucerne sedan (first generation)

2005–2011sedan (4 doors)203.2 in (5,161 mm) to 204.0 in (5,182 mm)

The first generation Lucerne was produced from 2005 through 2011 and restyled in 2009. The 2009 update changed bumpers and lights, so film cut for one version does not fit the other. A full wrap of this 4-door sedan uses about 62 ft (19 m) of cast film.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Lucerne

A partial wrap on the Lucerne can cover the roof, hood, or mirror caps. Lucerne chrome delete is a separate job that covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end only.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Buick Lucerne: body, cut-outs and film

The Lucerne is a full-size luxury sedan with four doors, so a Buick Lucerne vinyl wrap uses more film than a smaller car. Its length of 203.2 in (5,161 mm) to 204.0 in (5,182 mm) means a wrap shop needs long pieces for the sides and bumpers. The body has few sharp creases, which helps the film lie flat and reduces lifting risks.

Lucerne wrap ideas often include a chrome delete on the window trim and badges. Those bright parts are covered with black film after the main panels. Door handles and mirrors come off for clean edges, and the front bumper needs cut-outs for parking sensors or fog lights. The door moldings stay in place but take a heat gun to seat the film around them.

To know how much vinyl to wrap a Lucerne, you compare the 2005–2008 version with the 2009–2011 restyling. The 2009 change to bumpers and lights means film patterns from one version do not fit the other. Both versions keep the same body length range of 203.2 in (5,161 mm) to 204.0 in (5,182 mm).

Questions about wrapping a Buick Lucerne

How much vinyl does it take to wrap a Buick Lucerne?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap a Buick Lucerne. When chrome or patterned film is used, the amount is about 72 ft (22 m).

Which years of the Lucerne take the same film cuts?

The 2005–2008 Lucernes take the same film cuts. The 2009–2011 versions take a different set because the restyling changed the bumpers and lights.

Can I wrap only the hood or the roof of a Lucerne?

Yes, you can wrap only the hood or the roof of a Lucerne. A partial wrap is a smaller job that covers the roof, hood, or mirror caps.

Is a Lucerne hard to wrap?

The Lucerne is not hard to wrap, but its long body adds work. The front and rear bumpers are large and need care around lights and sensors. The restyling in 2009 means two film patterns are needed for different years.