Wraps by car

Buick Special wrap

The Buick Special wrap page covers both generations of this classic car, from 1936 to 1958. A full wrap of the newest body takes about 66 ft (20 m) of film for the convertible up to 72 ft (22 m) for the wagon. The vinyl wrap can be applied in a solid color, a chrome finish, or a patterned design. This page gives the wraps, sizes, and film amounts for the Buick Special.

2generations20 mof film for a full wrap

Buick Special, second generation, factory photo
Buick Special, second generation. Factory color shown.

Buick Special wrap colors and ideas

  • Special black wrap
  • Special white wrap
  • Special gray wrap
  • Special silver wrap
  • Special red wrap
  • Special blue wrap
  • Special green wrap
  • Special yellow wrap
  • Special orange wrap
  • Special purple wrap
  • Special pink wrap
  • Special teal wrap
  • Special brown wrap
  • Special gold wrap
  • Special chrome wrap
  • Special color shift wrap
  • Special carbon fiber wrap
  • Special camo and patterned wrap

How much vinyl to wrap a Buick Special

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1949–1958convertible, coupe, sedan, wagon (2 or 4 or 5 doors)204.0 in (5,182 mm) to 205.9 in (5,230 mm)about 66 ft (20 m) for the convertible to 72 ft (22 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m)
1936–1949convertible, coupe, sedan, wagon (2 or 4 or 5 doors)207.5 in (5,270 mm)about 62 ft (19 m) for the convertible to 72 ft (22 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m)

Special wrap cost factors

Special wrap cost depends on the body style, the film type, and the condition of the paint. A wagon needs more film than a convertible, up to 72 ft (22 m) versus 62 ft (19 m) on the first generation. The film is a 60-inch (1.52 m) cast vinyl, and a chrome or patterned finish raises the amount to about 82 ft (25 m). Older paint may need more preparation before the film is applied.

  • Film for a full wrap: about 66 ft (20 m) for the convertible to 72 ft (22 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m).
  • Body: convertible, coupe, sedan, wagon (2 or 4 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Special wraps by generation

Swipe sideways. Tap a card for the full description.

Buick Special, second generation, factory photo
Factory color shown

1949–1958 Special convertible, coupe, sedan, wagon (second generation)

1949–1958convertible, coupe, sedan, wagon (2 or 4 or 5 doors)204.0 in (5,182 mm) to 205.9 in (5,230 mm)

The Buick Special second generation has a convertible body with a fabric top that is not wrapped. The film ends where the fabric top begins. If the car has a folding hard top, the top is wrapped as panels of its own. The tailgate on the wagon has a rear glass, and the film stops at the edge of that glass.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 66 ft (20 m) for the convertible to 72 ft (22 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m).

Buick Special, first generation, factory photo
Factory color shown

1936–1949 Special convertible, coupe, sedan, wagon (first generation)

1936–1949convertible, coupe, sedan, wagon (2 or 4 or 5 doors)207.5 in (5,270 mm)

The Buick Special first generation often has paint that is original or repainted after many years. A test spot on each panel shows whether the paint can hold the film safely. The wrap installer checks for adhesion before applying film to the whole car. This step avoids lifting or damage on panels with weak paint.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 62 ft (19 m) for the convertible to 72 ft (22 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Special

A partial wrap on a Buick Special covers the roof, the hood, or the mirror caps. Special chrome delete turns the bright window trim and badges black. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These jobs are smaller than a full color change wrap and can be done on any body style.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Buick Special: body, cut-outs and film

A Buick Special vinyl wrap covers a body that ranges from 204.0 in (5,182 mm) to 207.5 in (5,270 mm) in length. The second generation spans 1949 to 1958 and offers convertible, coupe, sedan, and wagon styles with 2, 4, or 5 doors. The first generation from 1936 to 1949 shares the same body styles. The wrap on the convertible ends where the fabric top begins, while a folding hard top is wrapped as its own panels.

Special wrap ideas must account for the cut-outs around the tailgate on wagon bodies. The tailgate includes the rear glass, and the film ends at the edge of the glass. On convertibles with a fabric top, the film stops at the base of the top. For a folding hard top, each panel is wrapped separately.

How much vinyl to wrap a Special depends on the generation and body style. The second generation needs about 66 ft (20 m) for the convertible and up to 72 ft (22 m) for the wagon. The first generation uses about 62 ft (19 m) for the convertible and up to 72 ft (22 m) for the wagon. A chrome or patterned film adds up to about 82 ft (25 m) on any body.

Questions about wrapping a Buick Special

How much vinyl does it take to wrap a Buick Special?

A Buick Special needs about 66 ft (20 m) of vinyl for the convertible and up to 72 ft (22 m) for the wagon on the newest body. These figures are for a 60-inch (1.52 m) cast film in a solid color. A chrome or patterned film needs up to about 82 ft (25 m). The exact amount depends on the body style and the installer's cutting plan.

Is the top of a Special wrapped?

No, the fabric top of a Special convertible is not wrapped. The film ends where the fabric top begins. A folding hard top is wrapped, with the film applied to each panel of the top separately.

Which Special body takes more film?

The wagon body takes more film than the convertible or the sedan. A wagon needs up to 72 ft (22 m) of vinyl, while the convertible needs about 66 ft (20 m) on the second generation. On the first generation, the wagon also takes 72 ft (22 m), and the convertible takes 62 ft (19 m). The extra film covers the larger roof and the tailgate area.

Can I wrap only the hood or the roof of a Special?

Yes, you can wrap only the hood or the roof of a Special as a partial wrap. The partial wrap also includes the mirror caps. A chrome delete on the window trim and badges is another smaller job. Paint protection film (PPF) on the front end is a clear film option as well.